• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.3
• /
• pp.252-258
• /
• 2010

If the speed measurement of resolver and the generation of PWM signals are implemented with single microcontroller, it is easy to reduce the system cost and to avoid the switching noise of inverters. To avoid the switching noise and to improve the accuracy of measurement, PWM switching and A/D sampling of the resolver should be synchronized. Phase angle of the resolver excitation signal is increased in stepwise manner, then, the output signal of the resolver is measured in each step. From the measured data, the optimal phase angle of resolver excitation signal is estimated using the least square approximation method.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.12
• /
• pp.125-130
• /
• 2016

Automatic quality inspection by computer vision can be applied and give a solution to the pharmaceutical industry field. Pharmaceutical capsule can be easily affected by flaws like dents, cracks, holes, etc. In order to solve the quality inspection problem, it is required computationally efficient image processing technique like thresholding, boundary edge detection and segmentation and some automated systems are available but they are very expensive to use. In this paper, we have developed a dented capsule image processing technique using edge-based image segmentation, TLS(Total Least Squares) curve fitting technique and adopted low cost camera module for capsule image capturing. We have tested and evaluated the accuracy, training and testing time of the classification recognition algorithms like PCA(Principal Component Analysis), ICA(Independent Component Analysis) and SVM(Support Vector Machine) to show the performance. With the result, PCA, ICA has low accuracy, but SVM has good accuracy to use for classifying the dented capsule.

• Environmental and Resource Economics Review
• /
• v.18 no.1
• /
• pp.1-22
• /
• 2009

The primary purpose of ITQ (individually transferable quota) is to reduce the overcapitalization problem in the open-access fishery. It has been argued that the least cost-efficient vessels under ITQ may exit first from the fishing by selling their quotas, thereby also reducing the excess capital. The purpose of this paper is to provide a case when ITQ may prompt the exit of less cost-inefficient vessels in the presence of irreversible exit cost which is proportional to the cost-inefficiency. Real option model is adopted in order to analyze the source of hysteresis associated with fishery exit decision. By linking the interaction between vessels' adjustment costs, cost-efficiency of harvest and uncertainty of fishery return, we show that cost-inefficient vessels will not exit always first from the fishery in contrast to the conventional wisdom. Relevant policy implications is discussed.

• Nuclear Engineering and Technology
• /
• v.21 no.3
• /
• pp.171-185
• /
• 1989

On the basis of equal health hazard risk, economic assessment of nuclear was compared with that of coal for the expansion planning of electric power generation in the year 2000. In comparing health risks, the risk of coal was roughly ten times higher than that of nuclear according to various previous risk assessments of energy system. The zero risk condition can never be achievable. Therefore, only excess relative health risk of coal over nuclear was considered as social cost. The social cost of health risk was estimated by calculation of mortality and morbidity costs. Mortality cost was ＄250,000 and morbidity cost was ＄90,000 in the year 2000.(1986US＄) Through Cost/Benefit Analysis, the optimal emission standards of coal-fired power generation were predicted. These were obtained at the point of least social cost for power generation. In the year 2000, the optimal emission standard of SOx was analyzed as 165ppm for coal-fired power plants in Korea. From this assessment, economic comparison of nuclear and coal in the year 2000 showed that nuclear would be more economical than coal, whereas uncertainty of future power generation cost of nuclear would be larger than that of coal.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.25 no.1
• /
• pp.25-38
• /
• 2022

Urban problems are constantly occurring around the world due to rapid industrialization and population decline. In particular, as the number of vacant houses is gradually increasing as the population decreases, it is necessary to prepare countermeasures. A plan to utilize vacant houses has emerged to restore the natural environment of the urban ecosystem where forest destruction, damage to habitats of wild animals and plants, and disconnection have occurred due to large-scale development. Through connectivity analysis, it is possible to understand the overall ecosystem flow based on the movement of species and predict the effect when vacant houses are converted into green spaces. Therefore, this study analyzed the green area network to confirm the possibility of greening of vacant houses neglected in Jeonju based on circuit theory. Using Circuitscape and Least-cost path, we tried to identify the connectivity of green areas and propose an ecological axis based on the analysis. In order to apply the resistance values required for analysis based on previous studies, the 2020 subdivision land cover data were integrated into the major classification evaluation items. When the eight forests in the target site were analyzed as the standard, the overall connectivity and connectivity between forests in the area were high, so it is judged that the existing green areas can perform various functions, such as species movement and provision of habitats. Based on the results of the connectivity analysis, the importance of vacant houses was calculated and the top 20 vacant houses were identified, and it was confirmed that the higher the ranking, the more positive the degree of landscape connectivity was when converted to green areas. In addition, it was confirmed that the results of analyzing the least-cost path based on the resistance values such as connectivity analysis and the existing conceptual map showed some differences when comparing the ecological axes in the form. As a result of checking the vacant houses corresponding to the relevant axis based on the width standards of the main and sub-green areas, a total of 30 vacant houses were included in the 200m width and 6 vacant houses in the 80m width. It is judged that the conversion of vacant houses to green space can contribute to biodiversity conservation as well as connectivity between habitats of species as it is coupled with improved green space connectivity. In addition, it is expected to help solve the problem of vacant houses in the future by showing the possibility of using vacant houses.

• Korean Journal of Ecology and Environment
• /
• v.57 no.2
• /
• pp.75-82
• /
• 2024

This study examined the spatial morphological patterns of forest habitats and the characteristics of roadkill occurrences in the forests of Mungyeong, Yecheon, Yeongju, Andong, and Bonghwa in Gyeongsangbukdo. It involved building a resistance map between habitats and analyzing connectivity based on the least-cost distance. The analysis of the distance between the forest habitat Cores derived from MSPA and roadkill points showed that roadkill occurrences were concentrated approximately 74.11 m away from the Cores, with most roadkills happening within 360m from the habitats. The connectivity analysis between core habitats larger than 1 km² revealed 141 core habitats and 242 least-cost paths between them. The corridor distance value was found to be highest in Mungyeong city, indicating an urgent need for strategies to enhance habitat connectivity there. This research is expected to serve as foundational data for developing strategies to enhance ecosystem connectivity and restore habitats, by analyzing ecosystem connectivity and roadkill issues due to habitat fragmentation.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2430-2434
• /
• 2005

Automatic FPC punching instrument for the improvement of working condition and cost saving is introduced in this paper. FPC(flexible printed circuit) is used to detect the contact position of K/B and button like a cellular phone. Depending on the quality of the printed ink and position of reference punching point to the FPC, the resistance and current are varied to the malfunctioning values. The size of reference punching point is 2mm and the above. Because the punching operation is done manually, the accuracy of the punching degree is varied with operator's condition. Recently, The punching accuracy has deteriorated severely to the 2mm punching reference hall so that assembly of the K/B has hardly done. To improve this manual punching operation to the FPC, automatic FPC punching system is introduced. Precise mechanical parts like a 5-step stepping motor and ball screw mechanism are designed and tested and low cost PC camera is used for the sake of cost down instead of using high quality vision systems for the FA. 3D Mechanical design tool(Pro/E) is used to manage the exact tolerance circumstances and avoid design failures. Simulation is performed to make the complete vision based punching machine before assembly, and this procedure led to the manufacturing cost saving. As the image processing algorithms, dilation, erosion, and threshold calculation is applied to obtain an exact center position from the FPC print marks. These image processing algorithms made the original images having various noises have clean binary pixels which is easy to calculate the center position of print marks. Moment and Least square method are used to calculate the center position of objects. In this development circumstance, Moment method was superior to the Least square one at the calculation of speed and against noise. Main control panel is programmed by Visual C++ and graphical Active X for the whole management of vision based automatic punching machine. Operating modes like manual, calibration, and automatic mode are added to the main control panel for the compensation of bad FPC print conditions and mechanical tolerance occurring in the case of punch and die reassembly. Test algorithms and programs showed good results to the designed automatic punching system and led to the increase of productivity and huge cost down to law material like FPC by avoiding bad quality.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.1
• /
• pp.17-25
• /
• 2011

At the computer games, we can experience a variety of environments using a virtual object. It is similar to that be trained in War-game simulator of the defense. Actual soldiers and a computer-generated virtual group(Computer Generated Force: CGF) in 3-D virtual battlefield environment are training. However, path finding algorithm, one of the techniques of simulation models, to the current level only considers the shortest time path. So, this current level at the special situation of the army in the battlefield for selecting the optimal path is limited. The focus of this paper is to select the least-cost path using the deadline with several different mission conditions(METT+TC). For the only shortest time path algorithm and the least-cost path algorithm using dealine,($d_t$, one of METT+TC elements), Its usefulness is verifying the change of the move spent time(t) for all possible paths and the fighting power of the combat troops(Troops ability, a) through a comparison of the total cost of moves(c(t)). According to the results, when considering the deadline, the proposed algorithm saves about 62.5% of the maximum cost.

• Journal of Environmental Impact Assessment
• /
• v.31 no.4
• /
• pp.201-213
• /
• 2022

Creation and administration of green space are emphasized to solve the environmental problem and the management of green space in urban area. Urban area with high development pressure faces green space fragmentation, so the planned approach is needed to improve the continuity of green space. However, the current institutional green axis, used to enhance continuity of urban space is merely an abstract concept under the master plan so that is not a consistent framework for urban green continuity providing no detailed information such as position and path. Therefore, in order to consistently manage green space in continuous point of view, it is insufficient not being connected to each individual green space development projects. This study proposes a method for finding the connection path to enhance urban green space continuity. This proposed method consists of two phases. First phase is finding nodes to connect current green space and second is to calculate the least cost path. We calculate connection cost using NDMI (Normalized Difference Moisture Index), impervious ratio and official land cost, applying to Suwon city and potential greening site that was planned in official master plan. According to the results, we confirm a possibility of finding a cost-effective connection path with detailed spatial information instead of unrealistic abstract concepts and discuss worth applying to a legally plan and policy.

• Environmental and Resource Economics Review
• /
• v.25 no.3
• /
• pp.403-419
• /
• 2016

Cap-and-trade policies that allow firms to trade emission allowances are designed to reduce emissions at least cost and are shown to be efficient when there is no uncertainty over emissions. This paper examines how uncertainty in emissions affects firms' decisions about permit purchase and abatement. The results show that whether firms abate more under uncertainty compared to a case with no uncertainty depends on the expected penalty cost and marginal abatement cost. If the expected marginal penalty cost is greater than the marginal abatement cost, the firm will choose to reduce emissions and abate more under uncertainty. When the expected marginal penalty is greater than the marginal cost of abatement, increases in uncertainty result in reduced emissions. This paper also examines whether the order of abatement and permit trading and the realization of uncertainty affect firms' decisions. The results show that total expected emissions are the same regardless of the order of moves.