• 제목/요약/키워드: Lean premixed flame

검색결과 155건 처리시간 0.022초

희박 예혼합 가스터빈 연소기에서의 화염 전달 함수 소개 (Introduction to Flame Transfer Function in Lean Premixed Gas Turbine Combustor)

  • 김대식
    • 대한기계학회논문집B
    • /
    • 제35권9호
    • /
    • pp.975-979
    • /
    • 2011
  • 희박 예혼합 가스터빈 연소기는 강화되는 NOx 배출가스 규제를 만족시키기 위한 가장 현실적인 방법으로 인식되고 있다. 그러나 이러한 희박 예혼합 연소기에서는 열발생파와 시스템 내부의 압력파 사이의 상호 피드백 관계에 의한 연소 불안정 현상으로 인하여 그 적용이 제한되거나, 이를 회피하기 위한 기술의 적용으로 인하여 설계 비용의 상승이 불가피하다. 본 논문에서는 연소 불안정 현상이 발생하는 기본 메커니즘을 소개하고, 연소 불안정 원인 규명의 일환으로 최근 활발히 연구되고 있는 화염전달 함수 측정이 실험적으로 규명되었고, 주요 측정 결과가 소개되었다.

물添加가 豫混合火焰의 燃燒效率에 미치는 影響 (The effect of water addition on combustion efficiency in premixed flame)

  • 김성환;오신규;채재우
    • 대한기계학회논문집
    • /
    • 제11권5호
    • /
    • pp.819-827
    • /
    • 1987
  • 본 연구에서는 예혼합화염에 물을 촘가하였을 때의 물/연료 체적비에 따른 화 염온도, 불완전가스농도(CO, THC, H$_{2}$), soot 농도를 측정하여 물이 연소효율에 미치는 영향을 고찰하고자 한다.

메탄/공기 예혼합화염에서의 수소첨가에 의한 소염 및 $NO_x$ 발생특성에 관한 수치해석 (Numerical Analysis of the Extinction and $NO_x$ Emission in Methane/Air Premixed Flame by Hydrogen Addition)

  • 조은성;정석호;안국영
    • 한국수소및신에너지학회논문집
    • /
    • 제17권1호
    • /
    • pp.75-81
    • /
    • 2006
  • Lean premixed combustion is a well known method for low $NO_x$ gas turbine combustor. But lean combustion is usually accompanied by flame instability. To overcome this problem, the hydrogen ($H_2$) was added to main fuel methane to increase flammable limit. In this paper, the effects of hydrogen addition on lean premixed combustion of methane ($CH_4$) were investigated numerically. Results showed that the extinction stretch rate increases and the extinction temperature constant with relatively small amount of $H_2$ addition. The flame temperature and NO emission increase with $H_2$ addition at the same stretch rate and equivalence ratio but it could increase the range of lean extinction and extinction equivalence ratio limit. Eventually, the $H_2$ addition case showed almost same or lower NO emission than no addictive $CH_4$ case in the extinction condition.

라디칼 PLIF계측을 이용한 연소실의 공간적 열발생율 예측 (Prediction of Spatial Heat Release Rate of Combustion Chamber by Radicals-PLIF)

  • 최경민
    • 한국분무공학회지
    • /
    • 제8권4호
    • /
    • pp.9-16
    • /
    • 2003
  • The Purpose of this study is to investigate the relationships between the local heat release rate and CH concentration have been investigated by numerical simulations of methane-air premixed flames. And simultaneous CH and OH PLIF(Planar Laser Induced Fluorescence) measurement has been also conducted for lean premixed flame as well as for laminar flames. Numerical simulations are conducted for laminar premixed flames and turbulent ones by using PREMIX in CHEMKIN and two dimensional DNS code with GRI mechanism version 2.11, respectively. In the case of laminar premixed flame, the distance between the peak of heat release rate and that of CH concentration is under $91{\mu}m$ for all equivalence ratio calculated in present work. Even for the premixed flame in high intensity turbulence, the distribution of the heat release rate coincides with that of CH mole fraction. For CH PLIF measurements in the laminar premixed flame burner, CH fluorescence intensity as a function of equivalence ratio shows a similar trend with CH mole fraction computed by GRI mechanism. Simultaneous CH and OH PLIF measurement gave us useful information of instantaneous reaction zone. In addition, CH fluorescence can be measured even for lean conditions where CH mole fraction significantly decreases compared with that of stoichiometric condition. It was found that CH PLIF measurements can be applicable to the estimation of the spatial fluctuations of heat release rate in the engine combustion.

  • PDF

희박 예혼합 가스터빈 연소기 3 차원 전산 해석 및 화학반응기 네트워크에 의한 NOx 예측 (3D RANS Simulation and the Prediction by CRN Regarding NOx in a Lean Premixed Combustion in a Gas Turbine Combustor)

  • 이재복;정대로;허강열;진재민;박정규;이민철
    • 대한기계학회논문집B
    • /
    • 제35권12호
    • /
    • pp.1257-1264
    • /
    • 2011
  • 희박예혼합 가스터빈 연소기에 대한 3 차원 RANS 해석을 수행하였으며 PCFM(Partially Premixed Coherent Flame Model) 화염면적밀도 생성항 상수의 보정을 통하여 희박연소조건을 모사하였다. PCFM 에서 계산된 화염면적밀도에 의해 층류 예혼합 화염의 전파를 예측하고 불균일하게 분포한 기연 가스의 물성을 평형 가정에 따라 예측하였다. 복사와 대류 열전달을 모사하기 위해 냉각 조건으로서 실험과의 비교를 통해 결정된 열유속을 적용하였다. 이러한 3 차원 해석 결과를 바탕으로 파일럿 노즐과 메인 노즐에 분배되는 연료량 비에 대한 민감도 조사를 수행하였으며 CRN(Chemical Reactor Network)을 구성하여 NOx 배출량을 예측하고 측정값과 비교 분석하였다.

Experimental Investigation of Scalar Dissipation Rates in Lean Hydrocarbon/Air Premixed Flames

  • Chen, Yung-Cheng;Bilger, Robert W.
    • 한국연소학회지
    • /
    • 제6권2호
    • /
    • pp.43-49
    • /
    • 2001
  • Instantaneous, three-dimensional scalar dissipation rates of the reaction progress variable are measured in turbulent premixed Bunsen flames of lean hydrocarbon/air mixtures with the two-sheet, two-dimensional Rayleigh scattering technique. The flames investigated are located in the turbulent flame-front regime on a newly proposed combustion diagram for premixed flames. The conditionally-averaged mean scalar dissipation rates, $N_{\zeta}$ are found to be lower than the calculated laminar values, indicating a locally broadened flame front. In agreement with previous measurements, the maximum of $N_{\zeta}$, decreases strongly with increasing Karlovitz numbers. The conditional probability density functions are close to a log-normal distribution for scalar dissipation rates conditioned at the progress variable value where the scalar dissipation is maximum in unstretched laminar flame calculations. The time scale for the Favre-averaged mean scalar dissipation rate decreases in general across the turbulent flame brush from the unburnt to burnt side.

  • PDF

열-음향에 의한 난류희박 예혼합연소의 불안정성에 관한 실험적 연구 (An experimental study on the instability of lean premixed turbulent combustion induced by thermo-acoustics)

  • 홍정구;이민철;신현동
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2004년도 추계학술대회
    • /
    • pp.1166-1171
    • /
    • 2004
  • The combustion instability acts as a serious obstacle for the lean premixed combustion of gas turbine and even causes the fatal damage to the combustor and whole system. In this experiment, the pressure fluctuation is highly related to the stabilizing position of flame and fuel injection location. The fuel injection location is connected with the convection time of the fresh mixture, which is important time scale to refresh the mixtures near the flame stabilization location. The flame is extremely unstable when the alternative stabilization occurs and bulk mode frequency (${\sim}10Hz$) of pressure fluctuation is observed in this condition. It was found that the convection time scale of the fresh reactant coincided with the time scale of the bulk mode fluctuation. Hence this phenomenon results from the local equivalence ratio change caused by the pressure fluctuation induced by thermo-acoustic effects.

  • PDF

고온 채널 내부 에지화염의 소염 한계 영역에서의 화염 안정화 및 구조에 관한 실험적 연구 (Experimental Study on the Edge Flame Stabilization and its Structure Nearby Quenching Limits in a High Temperature Channel)

  • 이민정;김남일
    • 한국연소학회지
    • /
    • 제15권3호
    • /
    • pp.1-7
    • /
    • 2010
  • Edge flames have been interested as a basic structure that is concerned to flame stabilization and re-ignition of non-premixed flames. The edge flame consists of a lean premixed flame, a rich premixed flame, and a diffusion flame. In order to investigate fundamental structures of the edge flames at the conditions near the flammability limits, edge flames were stabilized within a heated narrow channel. Highly diluted partially premixed methane was used, and the flow rates of air and the partially premixed mixture were controlled. Various flame behaviors, including a transition between ordinary edge flames and premixed flames, were observed. Flame stabilization characteristics were examined as well. All flame stabilization conditions in this study showed a similar trend: characteristic time scales were inversely proportional to the equivalence ratio defined at the burner inlet. Finally, an interesting flame structure having a weak diffusion branch enveloped by a closed premixed branch was found near the flammability limits even in a fuel-air mixing layer. This structure was named as a "flame-drop" and the importance of this structure was first suggested.

A New Flame-Stabilization Technology for Lean Mixtures

  • Kim, Duck-Jool;Choi, Gyung-Min
    • Journal of Mechanical Science and Technology
    • /
    • 제14권4호
    • /
    • pp.426-432
    • /
    • 2000
  • The development of a low-pollution burner is important for saving energy and preserving the environment. A low-pollution burner can be produced by lean-mixture combustion and general combustion technology. The flammable limit of premixed flame is narrower than that of diffusion flame. Producing a lean mixture of fuel results in an effective combustion condition, which in turn produces high load and low pollution. In this study, it was found that the influx of $Q_2$ had an effect on extending the lean flammable limits and flame stabilization in a doubled jet burner. And the flame, consisting of small eddies, can be stabilized by the nozzle neck phenomena.

  • PDF

연료-공기 비혼합도가 희박예혼합 연소 특성에 미치는 영향 (Effects of Fuel-Air Unmixedness on Lean Premixed Combustion Characteristics)

  • 김대현;이종호;전충환;장영준
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2002년도 제24회 KOSCO SYMPOSIUM 논문집
    • /
    • pp.133-139
    • /
    • 2002
  • The lean premixed technique has been proven very efficient in reducing NOx emissions from gas turbine combustors. However combustion instability is susceptible to occur in lean premixed combustor. So laboratory-scale dump combustor was used to understanding the underlying mechanisms causing combustion instabilities. In this study, tests were conducted at atmospheric pressure and inlet air was up to $360^{\circ}C$ with natural gas. The observed instability was a longitudinal mode with a frequency of ${\sim}341.8Hz$. At selected unstable conditions, phase-resolved OH chemiluminescence images were captured to investigate flame structure with various equivalence ratio. Combustion instability was observed to occur at higher value of equivalence ratio(>0.69). This study was performed to investigate the effects of equivalence ratio and fuel split measuring NOx and acoustic wave. The results reveal the effect of fuel-air unmixedness on lean premixed combustor.

  • PDF