• 방사성폐기물학회지
• /
• 제21권4호
• /
• pp.559-570
• /
• 2023

The aim of this study is to ensure the structural integrity of a canister to be used in a dry storage system currently being developed in Korea. Based on burnup and cooling periods, the canister is designed with 24 bundles of spent nuclear fuel stored inside it. It is a cylindrical structure with a height of 4,890 mm, an internal diameter of 1,708 mm, and an inner length of 4,590 mm. The canister lid is fixed with multiple seals and welds to maintain its confinement boundary to prevent the leakage of radioactive waste. The canister is evaluated under different loads that may be generated under normal, off-normal, and accident conditions, and combinations of these loads are compared against the allowable stress thresholds to assess its structural integrity in accordance with NUREG-2215. The evaluation result shows that the stress intensities applied on the canister under normal, off-normal, and accident conditions are below the allowable stress thresholds, thus confirming its structural integrity.

• Journal of Korean Neurosurgical Society
• /
• 제48권6호
• /
• pp.490-495
• /
• 2010

Objective : Bone cement augmentation procedures such as percutaneous vertebroplasty and balloon kyphoplasty have been shown to be effective treatment for acute or subacute osteoporotic vertebral compression fractures. The purpose of this study was to determine the efficacy of bone cement augmentation procedures for long standing osteoporotic vertebral compression fracture with late vertebral collapse and persistent back pain. Methods : Among 278 single level osteoporotic vertebral compression fractures that were treated by vertebral augmentation procedures at our institute, 18 consecutive patients were included in this study. Study inclusion was limited to initially, minimal compression fractures, but showing a poor prognosis due to late vertebral collapse, intravertebral vacuum clefts and continuous back pain despite conservative treatment for more than one year. The subjects included three men and 15 women. The mean age was 70.7 with a range from 64 to 85 years of age. After postural reduction for two days, bone cement augmentation procedures following intraoperative pressure reduction were performed. Imaging and clinical findings, including the level of the vertebra involved, vertebral height restoration, injected cement volume, local kyphosis, clinical outcome and complications were analyzed. Results : The mean follow-up period after bone cement augmentation procedures was 14.3 months (range 12-27 months). The mean injected cement volume was 4.1 mL (range 2.4-5.9 mL). The unipedicular approach was possible in 15 patients. The mean pain score (visual analogue scale) prior to surgery was 7.1, which decreased to 3.1 at 7 days after the procedure. The pain relief was maintained at the final follow up. The kyphotic angle improved significantly from $21.2{\pm}4.9^{\circ}$ before surgery to $10.4{\pm}3.8^{\circ}$ after surgery. The fraction of vertebral height increased from 30% to 60% after bone cement augmentation, and the restored vertebral height was maintained at the final follow up. There were no serious complications related to cement leakage. Conclusion : In the management of even long-standing osteoporotic vertebral compression fracture for over one year, bone cement augmentation procedures following postural reduction were considered safe and effective treatment in cases of non-healing evidence.

• Journal of Plant Biotechnology
• /
• 제35권1호
• /
• pp.55-61
• /
• 2008

PCR 및 Real-Time PCR 검정으로 확인된 국화 형질전환체는 저온저항성 BN115 gene과 표지유전자로 kanamycin에 저항성 있는 nptII gene을 가지고 있는 식물발현용 binary vector pBin19/BN115가 삽입된 A. tumefacience MP90을 국화잎에 공동 배양함으로 유전자가 도입되었다. 최종 선발된 형질전환체의 온도별 생육은 형질전환체가 비형질전환체에 비해 초장, 생체중, 엽수 모두 우수하였다. 또한 저온에서의 상해정도 관찰에서도 수침상정도가 비형질전환체보다 경미하였다. 저온의 외부환경에 따른 국화잎의 기공모양은 닫고 있는 비형질전환체와 달리 형질전환체는 개구된 모양을 유지하고 있었으며, 크기는 형질전환체의 크기가 비형질전환체보다 더 큰 것으로 측정되었다. 저온조건에서의 형질전환체 엽록소 함량은 5, $25^{\circ}C$에서는 비형질전환체와 비교하여 SPAD value 값에 큰 차이가 없었지만, 10, $15^{\circ}C$에서는 최대 +5.7 (평균+3.0), +9.7 (평균 +5.7)로 상대적으로 높은 함량을 나타냈다 또한 Ion leakage test결과 저온저항성 유전자가 도입된 형질전환체의 세포가 외부환경에 안정적으로 적응하여 세포내 파괴나 상해를 받지 않음으로 형질전환체의 EC 농도 (ds/m)가 비형질전환체에 비해 $1.29{\sim}1.97$배 낮은 수치를 보였다.

• 마이크로전자및패키징학회지
• /
• 제10권2호
• /
• pp.1-5
• /
• 2003

기존 형상의 미세 가열기를 이용한 마이크로 시스템 패키징의 문제점을 해결하기 위해 새로운 형상의 미세 가열기를 제작하여 패키징 실험을 시행하였다. 기존 형상의 미세 가열기와 새로운 미세 가열기의 형상을 각각 제작하여 접합시에 미세 가열기에 발생하는 열분포를 IR카메라를 이용하여 실험하였다. 기존 형상의 미세 가열기가 불균일하게 가열되는 반면, 새로운 형상의 미세 가열기는 매우 균일하게 가열되는 형상을 나타내었고, IR 카메라를 이용한 실험 결과를 바탕으로 각기 다른 형상의 미세 가열기를 이용하여 접합 실험을 실시하였다. 접합 실험시 사용한 미세 가열기는 폭 $50{\mu}m$, 두께 $2{\mu}m$로 제작하였으며, 0.2Mpa 의 압력을 Pyrex glass cap에 가한 상태에서 150mA의 전류를 공급하여 접합을 완료하였다. 접합이 완료된 시편들에 대해서 IPA를 통한 leakage check실험을 실시하였으며, 기존 형상의 미세 가열기를 이용한 시편들은 66%가 테스트를 통과한 반면 새로운 형상의 미세 가열기를 이용한 시편들은 85%이상이 테스트를 통과하였다. Leakage 실험을 통과한 각각의 시편들에 대해서 접합력 측정을 실시한 결과, 기존 형상의 미세 가열기를 이용한 시편들은 15∼21Mpa의 접합력을 나타내었고, 새로운 형상의 미세 가열기를 이용한 시편들은 25∼30Mpa의 우수한 접합력을 나타내었다.

• Molecules and Cells
• /
• 제41권5호
• /
• pp.413-422
• /
• 2018

Soybean transgenic plants with ectopically expressed AtABF3 were produced by Agrobacterium-mediated transformation and investigated the effects of AtABF3 expression on drought and salt tolerance. Stable Agrobacterium-mediated soybean transformation was carried based on the half-seed method (Paz et al. 2006). The integration of the transgene was confirmed from the genomic DNA of transformed soybean plants using PCR and the copy number of transgene was determined by Southern blotting using leaf samples from $T_2$ seedlings. In addition to genomic integration, the expression of the transgenes was analyzed by RT-PCR and most of the transgenic lines expressed the transgenes introduced. The chosen two transgenic lines (line #2 and #9) for further experiment showed the substantial drought stress tolerance by surviving even at the end of the 20-day of drought treatment. And the positive relationship between the levels of AtABF3 gene expression and drought-tolerance was confirmed by qRT-PCR and drought tolerance test. The stronger drought tolerance of transgenic lines seemed to be resulted from physiological changes. Transgenic lines #2 and #9 showed ion leakage at a significantly lower level (P < 0.01) than ${\underline{n}}on-{\underline{t}}ransgenic$ (NT) control. In addition, the chlorophyll contents of the leaves of transgenic lines were significantly higher (P < 0.01). The results indicated that their enhanced drought tolerance was due to the prevention of cell membrane damage and maintenance of chlorophyll content. Water loss by transpiration also slowly proceeded in transgenic plants. In microscopic observation, higher stomata closure was confirmed in transgenic lines. Especially, line #9 had 56% of completely closed stomata whereas only 16% were completely open. In subsequent salt tolerance test, the apparently enhanced salt tolerance of transgenic lines was measured in ion leakage rate and chlorophyll contents. Finally, the agronomic characteristics of ectopically expressed AtABF3 transgenic plants ($T_2$) compared to NT plants under regular watering (every 4 days) or low rate of watering condition (every 10 days) was investigated. When watered regularly, the plant height of drought-tolerant line (#9) was shorter than NT plants. However, under the drought condition, total seed weight of line #9 was significantly higher than in NT plants (P < 0.01). Moreover, the pods of NT plants showed severe withering, and most of the pods failed to set normal seeds. All the evidences in the study clearly suggested that overexpression of the AtABF3 gene conferred drought and salt tolerance in major crop soybean, especially under the growth condition of low watering.

• Journal of Korean Neurosurgical Society
• /
• 제30권2호
• /
• pp.173-179
• /
• 2001

Purpose : To assess therapeutic effects of percutaneous polymethylmethacrylate(PMMA) vertebroplasty on the pain caused by osteoporotic thoracic and lumbar vertebral body compression fractures in a large scale of a prospective clinical design, and to determine clinical factors influencing its therapeutic effects. Methods : A prospective clinical study was carried out in 349 vertebral levels of 159 patients between April 1998 and July 1999. The compression fractures were confirmed with bone scan and spine CT, and bone marrow density was measured. Visual analogue scale(VAS) score was used for pre- and post-operative assessments of the pain. All 159 patients were assessed immediately after surgery, and 140 patients of them were followed-up for about 6 months in average. Results : Partial and complete pain relief was sustained immediately after operation in 73%, through follow-up period in 88% of the patients. Pain relief was not proportional to the amount of PMMA or the rate of increase in the height of the compressed vertebral body. It appears that 3 to 6cc of PMMA was proper enough to sustain pain relief. Better clinical improvement was achieved in the patients treated within 6 months after occurrence of vertebral body fracture. The most frequent surgical complication was epidural leakage of PMMA, and the most serious complication was extravertebral leakage into the paravertebral muscles, which appeared to exert the worst influence on the outcome. However, surgery was not required in these patients. Conclusion : Therapeutic effects of PMMA percutaneous vertebroplasty on osteoporotic vertebral body compression fractures were confirmed in a relatively large scale of prospective clinical study. It appears that good outcome can be achieved in patients treated within 6 months after fracture, treated each level with 3 to 6cc of PMMA in amount. without serious complications.

• Journal of Chest Surgery
• /
• 제41권6호
• /
• pp.724-728
• /
• 2008

배경: 본원에서 자발성 기흉으로 흉강경을 이용 폐 쐐기절제술 후 퇴원한 환자가운데 재발로 수술을 다시 받은 환자에서 기흉의 재발에 관한 위험 인자에 대해 연구하였다. 대상 및 방법: 2002년 1월부터 2005년 12월까지 본원 흉부외과에서 흉강경을 이용하여 흉막 유착술 없이 폐 쐐기절제술만을 시행한 235명을 대상으로 하였다. 퇴원 후 외래 추적관찰 중에 재발이 없었던 A군(225명: 96%), 재발이 있었던 B군(10명: 4%)으로 나누어서 후향적 조사를 통하여 재발 위험인자에 대하여 알고자 하였다. 결과: 각 군의 평균나이는 재발되는 군에서 $19.6{\pm}7.17$세로 더 어렸으며(p<0.05), 각군 남녀 비는 남자가 많았으나, 통계학적 의의는 없었다 흡연력, 병변 부위 및 폐허탈 정도는 양군사이에 유의한 차이는 없었다. 수술적 요인에 대한 것으로 술 후 공기 누출기간이 길수록, 흉관 거치 기간이 짧을수록 재발 가능성이 더 높았으며(p<0.05), 평균 재발기간은 $10.2{\pm}8.5$개월($0.6{\sim}22$개월)이었다. 재발된 군 중 4명은 술 후 한달 동안 충분한 준비 운동 없는 과격한 운동(농구 등)을 했던 경험이었다. 술 후 재발에 영향을 주는 단일 변수는 수술 시 나이,공기 누출기간, 키/몸무게 비 및 흉관 유지 기간이었으며, 다중 변수에 의한 위험 인자는 수술 시 나이, 신장/몸무게 비, 공기 누출 및 흉관 유지 기간 순이었다 결론: 자발성 기흉에서 흉강경을 이용한 폐기포 절제술은 재발율이 개흉술에 비하여 높지 않아서 시행할 수 있지만, 재발 위험인자로 나이가 젊거나, 큰 신장/몸무게비, 지속적인 공기 누출 있거나 짧은 흉관 유지 기간이었으며, 퇴원 후 너무나 빠른 심한 운동은 폐기포절제술 후 기흉 재발의 원인이 될 수 있다.

• Journal of Plant Biotechnology
• /
• 제5권3호
• /
• pp.173-179
• /
• 2003

The combination of a radiation technique with an in vitro culture system was appiled to develop submergence tolerant rice. The 3,000 $M_3$ lines with an average 80 percent of fertile grain were utilized for the selection of submergence tolerance. Salt tolerant lines were selected based on high plant height, root length and root number after submergence in plastic pots. Of the lines tested, the tolerant line (403-6) showed a dramatic difference in morphological traits under submergence compared to its original variety (Dongjinbyeo). It was suggested that genetic variations between the original variety and $M_3$-403-6 did exist. The levels of $\alpha$-amylase and alcohol dehydrogenase activities were significantly increased in the mutant line compared to its original variety. The mutant with greater tolerance showed less electrolyte leakage indicating a greater membrane integrity and better survival. Also, this line was much more resistant to a salt stress of $1.25\%$ than the original variety. The proline level of the line was significantly (p<0.01> higher than that of the original variety. The relationships between the inhibition of growth caused by stress and the physiological changes in the plant cell were discussed.

• 한국재료학회지
• /
• 제14권3호
• /
• pp.191-195
• /
• 2004

Tunnel junctions with AI-N barriers fabricated by microwave-excited plasma were studied. When the Al thickness, nitridation time, and annealing temperature were 1 nm (0.8 nm), 50 s (35 s), and $280^{\circ}C$ ($300^{\circ}C$), TMR ratio and resistance-area product (RA) were 49% (34%) and $3 ${\times}$ 10^4$ $\Omega$$\mu\m^2$ ($1.5 ${\times}$ 10^4$ $\Omega$$\mu\m^2$), respectively. In order to clarify the annealing temperature dependence of TMR ratio, the local transport properties were measured for Ta 5 nm/Cu 20 nm/Ta 5 nm$29_{76}$ $Fe_{24}$ 2 nm/Cu 5 nm/M $n_{75}$$Ir_{25}$ 10 nm/ $Co_{71}$ $Co_{29}$ 4nm/Al-N junction with Al thickness of 0.8 nm and nitridation time of 35s at various temperatures. The increase of TMR ratio after annealing at $300^{\circ}C$, where the TMR ratio of the corresponding MTJ had the maximum value of 34%, can be well explained by the enhancement of the average barrier height ($\Phi_{ave}$) and the reduction of its fluctuation. After further annealing at $340^{\circ}C$, the leakage current was observed and the TMR ratio decreaseded

• 조명전기설비학회논문지
• /
• 제20권4호
• /
• pp.78-85
• /
• 2006

물놀이 입욕시설 내에서 입욕자는 물의 영향으로 인하여 인체의 피부저항이 다른 어느 장소보다도 현저히 낮은 상태에 있게 된다. 따라서 조명기구 등에 누전이 발생할 경우 미약한 전압에서도 치명적인 감전재해의 우려가 있다. 본 연구는 물놀이 입욕시설 내에서의 조명기구에 의한 감전사고를 방지하기 위하여 국내 외 관련규정을 비교 분석하였으며 또한, 국내 시설실태를 파악하였다. 그 결과 국내의 규정은 외국기준에 비해 적용범위가 불명확하고 환경조건의 구별이 불투명하고 사용전압이 높은 것으로 나타났다. 따라서 국내의 규정도 조명시설의 설치높이를 상향조정하고 조명기기의 외함에는 방수등급의 표기, 선간전압으로의 사용전압을 제한하는 등의 개정이 필요한 것으로 나타났다.