• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1590-1595
• /
• 2003

Direct drive servovalve(DDV) is a kind of one-stage valve since the rotary motion of DC motor is directly transferred to the linear motion of valve spool through the link. Since the structure of DDV is simple, it is less expensive, more reliable and offers reduced internal leakage and reduced sensitivity to fluid contamination. However, the flow force effect on the spool motion is significant such that it induces large steady-state error in a step response. If the proportional control gain is increased to reduce the steady-state error, the system becomes unstable. In order to satisfy the system design requirements, the lead-lag controller is designed using the complex method that is one kind of constrained direct search method.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 추계학술발표회논문집(1)
• /
• pp.19-24
• /
• 1997

In this study, we extend the application of the interface-matrix(IM) method for reflector modeling to Analytic Flux Expansion Nodal (AFEN) method. This include the modifications of the surface-averaged net current continuity and the net leakage balance conditions for IM method in accordance with AFEN fomular. AFEN-interface matrix (AFEN-IM) method has been tested against ZION-1 benchmark problem. The numerical result AFEN-IM method shows 1.24% of maximum error and 0.42% of root-mean square error in assembly power distribution, and 0.006%Δk of neutron multiplication factor. This result proves that the interface-matrix method for reflector modeling can be useful in AFEN method.

• 대한기계학회논문집A
• /
• 제28권11호
• /
• pp.1719-1726
• /
• 2004

Direct drive servovalve(DDV) is a kind of one-stage valve because the main spool valve is directly driven by the DC motor. Since the structure of DDV is simple, it is less expensive, more reliable and offers reduced internal leakage and reduced sensitivity to fluid contamination. However, the flow force effect on the spool motion is significant such that it induces large steady-state error in a step response. If the proportional control gain is increased to reduce the steady-state error, the system becomes unstable. In order to satisfy the system design requirements, the lead-lag controller is designed using the complex method that is one kind of constrained direct search method.

• 대한기계학회논문집A
• /
• 제26권4호
• /
• pp.754-763
• /
• 2002

Direct drive servovalve(DDV) is a kind of one-stage valve since the rotary motion of DC motor is directly transferred to the linear motion of valve spool through the link. Since the structure of DDV is simple, it is less expensive, more reliable and offers reduced internal leakage and reduced sensitivity to fluid contamination. However, the flow force effect on the spool motion is significant such that it induces large steady-state error in a step response. If the proportional control gain is increased to reduce the steady-state error, the system becomes unstable. In order to satisfy the system design requirements, the classical controller is designed using the analytical Bode method.

• 지질공학
• /
• 제26권3호
• /
• pp.307-314
• /
• 2016

흙의 전단특성을 조사하기 위하여 다양한 전단시험장치가 사용되고 있다. 특히 흙의 무한변형에 따른 잔류전단강도(residual shear strength)를 측정하고자 할 경우 링전단시험장치가 사용된다. 본 연구는 배수, 압밀 및 전단속도 제어가 가능한 비배수전단강도 측정용 링전단시험장치를 사용하여 전단동안 발생하는 누수현상(water leakage)이 전단특성에 미치는 영향성에 대하여 조사하였다. 실험은 비배수조건에서 동일한 수직응력(50 kPa)을 재하하고 전단속도(0.01, 0.1, 1 mm/sec)를 3단계로 구분하여 적용하였다. 실험결과에 따르면, 동일한 수직응력에서 비배수전단강도는 전단속도에 의존하는 것으로 나타났다. 하지만, 상대적으로 낮은 전단속도(V = 0.01 mm/sec)에서는 변형률 경화 거동(strain hardening behavior)을 보였고 상대적으로 높은 전단속도(V ≥ 0.1 mm/sec)에서는 변형률 연화 거동(strain softening behavior)을 보였다. 시험기 성능평가를 통하여 누수가 발생할 경우 전단속도 크기에 관계없이 전단응력은 증가하는 것으로 나타났다. 누수가 크면 클수록 전단응력이 증가된다. 이러한 실험결과는 전단동안 발생하는 누수로 인한 흙 입자의 재배열과 다짐도의 증가에 따른 것으로 판단된다. 따라서 육안조사 및 반복적인 포화와 압밀과정을 통하여 실험오차를 최소화할 수 있는 작업이 필요하다.

• 한국임상보건과학회지
• /
• 제2권4호
• /
• pp.223-230
• /
• 2014

Purpose. Scheduled calibration of refractive error's have various refractive surgery, and a side effect of post refractive surgery for refractive errors's before refractive surgery, by analyzing the eye condition of the refractive error's good state, it tries to increase the satisfaction of refractive error's refractive surgery. Methods. In response to 60 people preoperative data 20-30 generations of age, were analyzed for eye conditions. Results. IOP, thickness of the cornea, liquid leakage amount inspection, the corneal endothelium inspection, the size of the pupil, have been conducted auto refraction test and showed a numerical value in most normal range. Conclusion. Surgery can be of individual differences of patients, it is difficult to define the full normal range, to the surgery based on the case of this study, the side effects of patients after surgery is expected to be prevention.

• 전력전자학회논문지
• /
• 제6권1호
• /
• pp.74-81
• /
• 2001

스위치드 릴럭턴스 모터(이하 SRM) 구동을 위한 센서리스 설계는 노이즈에 민감하기 때문에 이에 대한 강인성과 신뢰성이 있어야 한다. SRM 구동시에 이들 성분은 소선호 전자회로와 함께 대전류 전력회로와 근접되어 전기적으로 노이즈 환경을 만든다. 또한, 쇄교 인덕턴스와 유한 커플링 캐패시턴스에 의해 어떤 저전압 전류와 전압 측정회로에 노이즈를 일으킬 수 있다. 노이즈를 포함한 전류와 전압은 센서리스 알고리즘의 입력 값으로 사용되기 때문에 위치추정에 대한 오차를 발생한다. 본 논문에서는 입력 노이즈에 대한 높은 강인성과 저항성을 기술하며 퍼지 논리 기반 회전자 위치 추정 알고리 즘과 관측기 모델이 입력 데이터의 오차를 줄이기 위해 사용하였다.

• 품질경영학회지
• /
• 제51권2호
• /
• pp.297-313
• /
• 2023

Purpose: The purpose of this study is to investigate the causes of shifting errors reported in military tracked vehicles and to improve related quality to prevent recurrence. Methods: A systematic disassembly and inspection of the transmission is carried out and an experimental simulation is conducted to reproduce the shifting error phenomenon. Electrical characteristic tests are subsequently performed and microscopic observation is also carried out on the disassembled connector parts such as pins and fractured surfaces. Results: Oil contamination and swelling deformation are observed in the connector to the vehicle due to oil leakage of its counterpart connector to the transmission. This causes electrical contact failure between both connectors in the fastened state, and it is found that shifting error of the tracked vehicle could occur subsequently. To prevent the recurrence of this phenomenon, comprehensive quality improvement is conducted including product improvement of the wiring harness assembly and strengthening activities for quality control and preventive maintenance. Conclusion: This study is expected to be helpful as a prior case study for cause analysis and recurrence prevention in the event of similar cases in the future.

• Journal of Korean Society for Atmospheric Environment
• /
• 제23권E2호
• /
• pp.66-73
• /
• 2007

The introduction of tracer gas techniques to ventilation studies in indoor environments provides valuable information that used to be unattainable from conventional testing environments. Data acquisition systems (DASs) containing analogue-to-digital (A/D) converters are usually used to function the key role that records signals to storage in digital format. In the testing process, there exist a number of components in the measuring equipment which may produce system-based inference to the monitored results. These unwanted fluctuations may cause significant error in data analysis, especially when non-linear algorithms are involved. In this study, a pre-processor is developed and applied to separate the unwanted fluctuations (noise or interference) in raw measurements and to reduce the uncertainty in the measurement. Moving average, notch filter, FIR (Finite Impulse Response) filters, and IIR (Infinite Impulse Response) filters are designed and applied to collect the desired information from the raw measurements. Tracer gas concentrations are monitored during leakage and ventilation tests in the model test room. The signal analysis functions are introduced to carry out the digital signal processing (DSP) work. Overall the FIR filters process the $CO_2$ measurement properly for ventilation rate and mean age of air calculations. It is found that, the Kaiser filter was the most applicable digital filter for pre-processing the tracer gas measurements. Although the IIR filters help to reduce the random noise in the data, they cause considerable changes to the filtered data, which is not desirable.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.367-370
• /
• 2004

We fabricated PLT(5) thin film on $Pt/TiO_x/SiO_2/Si$ substrate by using sol-gel method and investigated leakage current, switching and retention properties. The leakage current density of PLT(5) thin film was $3.56{\times}10^{-7}A/cm^2$ at 4V. In the examination of switching properties, pulse voltage and load resistance were $2V{\~}5V$ and $50{\Omega}{\~}3.3k{\Omega}$, respectively. Switching time had a tendency to decrease from 520ns to 140ns with the increase of pulse voltage, and also the time was increased from 140ns to $13.7{\mu}s$ with the increase of load resistance. The activation energy obtained from the relation of applied pulse voltage and switching time was about 143kV/cm. The error of switched charge density between hysteresis loop and experiment of polarization switching was about $10\%$. Also, polarization in retention was decreased as much as about $8\%$ after $10^5$s.