• 제목/요약/키워드: Leakage Dose

검색결과 149건 처리시간 0.026초

컴퓨터 단층촬영(CT) 방사선 노출 관리 시스템 소프트웨어 설계 (System Software Design of Computed Tomography Radiation Dose Management)

  • 양유미;이길흥;조상욱
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2014년도 춘계학술대회
    • /
    • pp.489-492
    • /
    • 2014
  • 본 논문에서는 컴퓨터 단층활영(CT)을 통해 발생되는 방사선 노출량의 관리를 위한 시스템의 소프트웨어 설계를 제안한다. 방사선 피폭량은 환자의 각 신체 부위별로 민감성의 차이에 따라 다르기 때문에 방사선의 노출량을 관리할 수 있게 되면 결과적으로 환자의 방사선 피폭량을 추정할 수 있다. 최근 일본 원전의 방사선 누출 사건이 국제적으로 뉴스가 되었고 원전 뿐 만아니라 의료용 방사선 피폭까지 폭넓게 관심이 커지고 있다. 현재 방사선 안전관리는 방사선 관계 종사자에 대해서만 관리되고 있지만, 이제는 환자에 대한 피폭 관리까지 요구되고 있다. 우리나라에서 방사선을 이용한 검사와 시술이 증가하여 이에 따른 의료 피폭이 증가하였으나 의료 기관에서는 환자에게 가해지는 방사선 피폭 수치를 알지 못하는 실정이다. 따라서 의료 기관에서 환자의 방사선 피폭을 관리할 수 있는 시스템이 필요하다. 본 논문에서는 의료 기관에서 방사선을 이용하는 대표적인 촬영 도구인 CT의 방사선 노출량을 관리할 수 있는 소프트웨어 설계를 제시한다. 방사선의 노출량을 확인하고 선량의 한도를 설정함으로써 환자의 의료 피폭량을 최적화 하는데 도움이 되고자 한다.

  • PDF

가임기 여성의 유방암 토모치료 시 난소선량 평가비교 (Evaluation of Ovary Dose for woman of Childbearing age Woman with Breast cancer in tomotherapy)

  • 이수형;박수연;최지민;박주영;김종석
    • 대한방사선치료학회지
    • /
    • 제26권2호
    • /
    • pp.337-343
    • /
    • 2014
  • 목 적 : 최근 시행되고 있는 가임기 여성의 유방암 토모치료 시 치료영역 외에서 발생되는 산란 및 누설에 의한 난소산란선량을 측정하여 평가하고자 한다. 대상 및 방법 : 인체모형팬텀(Aldorson Rando phantom, USA)을 대상으로 전산화단층영상 2.5 mm 획득 후, Tomotherapy Planning station(Tomotherapy, Inc, USA)을 이용하여 좌측 유방암 환자의 토모테라피 치료계획(Tomotherapy Helical & Tomotherapy Direct)을 수립하였다. 난소의 산량 선량 측정을 위한 측정 지점은 치료계획면적의 30 cm 아래 떨어진 골반의 좌우 위치로 직경 1.5 mm, 길이가 12mm인 저에너지용 보상필터가 들어있는 종류의 유리선량계 (GD-352M, ASAHI TECHNO GLASS CO, Japan)를 이용하여 각 5회씩 측정하여 평균하였으며, 선형지수-선량반응모델을 이용한 장기등가선량(organ equivalent dose: OED)으로 평가하였다. 결 과 : 토모 Helical 및 토모 Direct의 두 가지 방식으로 측정된 난소의 산란선량은 좌측 난소부위가 각각 평균 $64.94{\pm}0.84mGy$, $37.64{\pm}1.20mGy$이고, 우측 난소부위가 평균 $64.38{\pm}1.85mGy$, $32.96{\pm}1.11mGy$로 나타났다. 이는 토모치료 시 비교적 모니터 단위(MU)가 크고 조사 시간이 긴 토모Helical 방식이 토모Direct에 비하여 측정된 산란선량의 양이 보다 약 1.8배 높은 경향을 보였다. 결 론 : 가임기 여성의 유방암 토모테라피 시 발생하는 좌우측 난소의 산량선량은 ICRP 권고 선량이하로, 불임 및 2차 암 발생에 대한 우려 수준은 현저히 낮지만 향후 유방암 발생 연령층이 낮아지고, 토모테라피와 같이 고정밀 영상유도장치를 이용한 방사선치료가 발달할수록, 가임기 여성 환자의 난소산란선량에 대한 임상적 추적조사가 더욱 필요할 것으로 사료된다.

광대역 펄스감마선 탐지센서 최적화 설계 및 제작 (Optimized Design and Manufacture of Wideband Pulsed Gamma-ray Sensors)

  • 정상훈;이남호
    • 한국정보통신학회논문지
    • /
    • 제21권1호
    • /
    • pp.223-228
    • /
    • 2017
  • 본 연구에서는 광대역 펄스감마선 탐지센서 최적화 설계를 수행하고 설계결과를 기반으로 탐지센서를 제작하여 전기적 특성을 분석하였다. 탐지센서의 최적화 설계를 위해 펄스감마선의 시간에 따른 에너지 프로파일로 부터 입력 변수를 도출하고 탐지감도 제어회로를 통하여 출력전류 범위를 결정하였다. 도출된 변수를 바탕으로 N-type Epi Wafer 및 TCAD(Technology Computer Aided Design)로 설계하고 제작하였다. 제작된 탐지센서의 전기적 특성 분석 결과 -3.3V 전압에서 12pA의 누설전류와 -5V의 전압에서 완전 공핍화 되는 특성을 가짐을 확인하였다. 제작된 센서의 포항가속기연구소 TEST LINAC 시험결과 감마선 설정 선율의 펄스방사선에 대해 고감도의 광전류를 생성시킴을 확인하였다.

방사선과 자외선에 대한 고추 식물체 및 배양세포의 생장반응과 Capsidiol 생합성 유전자의 발현 차이 (Differential Growth Response and Gene Expression in Relation to Capsidiol Biosynthesis of Red Pepper Plant and Cultured Cells by γ-Ray and UV Stress)

  • 안정희;김재성;정정학;오세명;권순태
    • Journal of Plant Biotechnology
    • /
    • 제30권2호
    • /
    • pp.201-206
    • /
    • 2003
  • Differential responses of red pepper plant and cultured cells to enhanced ${\gamma}$-ray($^{60}$ Co) and ultraviolet(UV) stress were investigated. In seed treatment, 1 Gy of ${\gamma}$-ray increased seedling dry weight up to 19.1%, but 50 Gy treatment markedly ingibited seed germination and subsequent growth of seedling. UV treatment to seed did not change the germination ability of seeds and the growth of seedlings regardless of duration of UV treatment until 24 hrs. In case of UV treatment to seedlings, plant injury was seriously progressed even after the seedlings were returned to no UV condition, and eventually all the leaves showed chlorosis by the stress. However, progress of plant injury by ${\gamma}$-ray stress slower than that caused by UV stress, and even at the high dose of ${\gamma}$-ray 50 Gy, did not caused the cholrosis of stressed plant leaf. Amount of electrolytes leakage from plant leaf by UV treatment for 24hrs was increased up to 28.8 folds in comparison with untreated control, whereas that of 50 Gy of ${\gamma}$-ray was increased only 1.2 folds. UV stress induced the production of capsidiol, antimicrobial phytoalexin, by activation of gene expression involved in capsidiol biosynthesis, such as sesquiterpene cyclase and cyclase and cytochrome P450 hydroxylase in the leaf and cultured cell, but ${\gamma}$-ray stress induced neither the production of capsidiol nor expression of the genes.

Early Germination Response of Soybean Seed to Accelerated Aging and Low Dose Gamma Irradiation

  • Hwangbo, Jun-Kwon;Kim, Jae-Sung;Lim, Ji-Hyeok;Baek, Myung-Hwa;Chung, Byung-Yeoup;Kim, Jin-Hong
    • 한국작물학회지
    • /
    • 제49권1호
    • /
    • pp.25-29
    • /
    • 2004
  • The responses of soybean seeds were evaluated to accelerated aging and gamma irradiation with regard to germination, seed leakage, seed leachate component and dry weight of hypocotyl and primary root of the germinating seed. Accelerated aging significantly reduced the final germination rate while gamma irradiation increased the final germination rate. Furthermore, the interactive effects occurred that the final germination rate of 5-day aged seeds increased considerably in response to 4 Gy of gamma irradiation. The extent to which the electrolyte was leaked from the seeds (conductivity) was significantly affected by accelerated aging and showed a close negative correlation with the germination rate. Gamma irradiation, however, did not significantly affect the electrical conductivity of seed leachate. The accelerated aging significantly increased the concentrations of the particular electrolytes leaked from the seeds while the gamma irradiation did not affect those concentrations. Of the electrolytes leaked from the seeds, Ca and Mg showed relatively lower concentrations while K showed greater concentrations than others. Moreover, N and P showed similar responses to aging treatment. Aging treatment significantly affected dry weight (DW) of hypocotyls and primary root. Also, gamma irradiation decreased DW of hypocotyls and primary root, particularly for 8 Gy associated with 5 days aging treatment. The data were discussed in terms of the relationships of seed vigor with aging treatment and gamma irradiation.

Physicochemical Characterization and In Vivo Evaluation of Thermosensitive Diclofenac Liquid Suppository

  • Yong, Chul-Soon;Choi, Young-Kwon;Kim, Yong-Il;Park, Byung-Joo;Quan, Qi-Zhe;Rhee, Jong-Dal;Kim, Chong-Kook;Choi, Han-Gon
    • Archives of Pharmacal Research
    • /
    • 제26권2호
    • /
    • pp.162-167
    • /
    • 2003
  • Liquid suppository systems composed of poloxamers and bioadhesive polymers were easy to administer to the anus and mucoadhesive to the rectal tissues without leakage after the dose. However, a liquid suppository containing diclofenac sodium could not be developed using bioadhesive polymers. since the drug was precipitated in this preparation. To develop a liquid suppository system using sodium chloride instead of bioadhesive polymers, the physicochemical properties such as gelation temperature, gel strength and bioadhesive force of various formulations composed of diclofenac sodium, poloxamers and sodium chloride were investigated. Furthermore, the pharmacokinetic study of diclofenac sodium delivered by the liquid suppository was performed. Diclofenac sodium significantly increased the gelation temperature and weakened the gel strength and bioadhesive force, while sodium chloride did the opposite. The liquid suppositories with less than 1.0% of sodium chloride, in which the drug was not precipitated, were inserted into the rectum without difficulty and leakage. Furthermore, liquid suppository gave significantly higher initial plasma concentrations and faster Tmax of diclofenac sodium than did solid suppository, indicating that drug from liquid suppository could be absorbed faster than that from solid one in rats. Our results suggested that a thermosensitive liquid suppository system with sodium chloride and poloxamers was a more physically stable, convenient and effective rectal dosage form for diclofenac sodium.

진단용엑스선장치 제조품질관리에 관한 국내.외 규격의 동향 (The Recent Trend of the National and International Standard of Manufacturing Quality Control for Diagnostic X-ray Equipment)

  • 최인석;김정민;정회원;민정환;이인수
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제32권1호
    • /
    • pp.1-15
    • /
    • 2009
  • 진단용엑스선장치의 방사선방어 관한 내용을 중심으로 국내 외 규격을 살펴보고 신-구 IEC규격을 비교하여 본 결과는 다음과 같다. 가장 최근에 발표된 IEC 60601-1-3 ; 2008 2nd Edition에 담긴 철학은 크게 두 가지로서, 제조된 진단용 엑스선장치에 의하여 촬영 받게 될 환자를 위하여 어떤 종류의 방사선(선질 : Radiation Quality)을 얼마나 주었는지(선량 : Radiation Dose)를 확실히 해야 한다는 것이며 또 그 장치를 이용하는 작업자를 위하여 누설방사선(Leakage Radiation), 잉여방사선(Residual Radiation), 떠돌이 방사선(Stray Radiation)을 최소화해야 한다는 것이다. 진단용 엑스선장치에 관한 국내규격을 개정하거나 다시 제정할 경우 다음과 같은 내용과과정이 필요하다고 사료된다. 1. 가급적 최신 개념이 담긴 국제규격(IEC Publication)에 맞추되 우리나라의 실정에 맞는 규격을 채택하여야 할 것이다. 즉 IEC 60601-1-3 ; 2008을 근간으로 하고 미국의 CFR, 일본의 JIS도 참고한다면 지금 보다 한층 진보한 규격을 만들 수 있을 것이다. 2. 방사선안전부분을 중점적으로 고시하는 것이 간결하다. 즉 전기 기계적 안전에 관한 사항(IEC 60601-1)은 식품의약품안전청 고시 제 2006-7호 "의료기기의 전기 기계적 안전에 관한 공통기준규격"을 준용해야 한다. 3. 급격한 고시의 변화는 바람직하지 않다. 즉 최근에 개정된 IEC 60601-1-3 ; 2008을 도입하여 바로 적용하지 않고, 일단 현 규격을 일부 개정하여 사용하면서 적응기간을 가질 필요가 있다.

  • PDF

고 에너지 전자빔 조사에 따른 ZnO 기판의 결함생성 및 전기적 특성 변화 (Electrical Properties and Defect States in ZnO Substrates Irradiated by MeV Electron-beam)

  • 이동욱;송후영;한동석;김선필;김은규;이병철
    • 한국진공학회지
    • /
    • 제19권3호
    • /
    • pp.199-205
    • /
    • 2010
  • 수열합성법(hydrothermal) 방식으로 성장한 ZnO 기판에 고에너지의 전자빔을 조사시킨 후 쇼트키(Schottky)다이오드를 제작하여 결함상태와 전기적 특성 변화를 조사하였다. 1 MeV 및 2 MeV 전자빔으로 $1{\times}10^{16}$ electrons/$cm^2$ dose로 기판의 Zn 면에 조사하였다. 1 MeV 전자빔이 조사된 시료에서는 표면에 전자빔 유도결함을 형성시켜 누설전류를 증가시켰고, 2 MeV 전자빔의 경우는 오히려 다이오드 누설절류 감소와 on/off 특성을 향상시키는 것으로 나타났다. 이들 시료에 대한 DLTS (deep level transient spectroscopy) 측정결과 전자빔 조사에 따른 전기적 물성변화는 활성화에너지와 포획단면적이 각각 $E_c$-0.33 eV 및 $2.97{\times}10^{15}\;cm^{-2}$인 O-vacancy가 주된 연관성을 보였으며, 활성화에너지 $E_v$+0.8 eV인 결함상태도 새롭게 완성되었다.

Dosimetric Comparison of Three-Dimensional Conformal, Intensity-Modulated Radiotherapy, Volumetric Modulated Arc Therapy, and Dynamic Conformal Arc Therapy Techniques in Prophylactic Cranial Irradiation

  • Ismail Faruk Durmus;Dursun Esitmez;Guner Ipek Arslan;Ayse Okumus
    • 한국의학물리학회지:의학물리
    • /
    • 제34권4호
    • /
    • pp.41-47
    • /
    • 2023
  • Purpose: This study aimed to dosimetrically compare the technique of three-dimensional conformal radiotherapy (3D CRT), which is a traditional prophylactic cranial irradiation method, and the intensity-modulated radiotherapy (IMRT) and volumetric modulated arc therapy (VMAT) techniques used in the last few decades with the dynamic conformal arc therapy (DCAT) technique. Methods: The 3D CRT, VMAT, IMRT, and DCAT plans were prepared with 25 Gy in 10 fractions in a Monaco planning system. The target volume and the critical organ doses were compared. A comparison of the body V2, V5, and V10 doses, monitor unit (MU), and beam on-time values was also performed. Results: In planned target volume of the brain (PTVBrain), the highest D99 dose value (P<0.001) and the most homogeneous (P=0.049) dose distribution according to the heterogeneity index were obtained using the VMAT technique. In contrast, the lowest values were obtained using the 3D CRT technique in the body V2, V5, and V10 doses. The MU values were the lowest when DCAT (P=0.001) was used. These values were 0.34% (P=0.256) lower with the 3D CRT technique, 66% (P=0.001) lower with IMRT, and 72% (P=0.001) lower with VMAT. The beam on-time values were the lowest with the 3D CRT planning (P<0.001), 3.8% (P=0.008) lower than DCAT, 65% (P=0.001) lower than VMAT planning, and 76% (P=0.001) lower than IMRT planning. Conclusions: Without sacrificing the homogeneous dose distribution and the critical organ doses in IMRTs, three to four times less treatment time, less low-dose volume, less leakage radiation, and less radiation scattering could be achieved when the DCAT technique is used similar to conventional methods. In short, DCAT, which is applicable in small target volumes, can also be successfully planned in large target volumes, such as the whole-brain.

박막 접합 형성을 위한 열처리 방법에 관한 연구 ((A Study on the Annealing Methods for the Formation of Shallow Junctions))

  • 한명석;김재영;이충근;홍신남
    • 대한전자공학회논문지TE
    • /
    • 제39권1호
    • /
    • pp.31-36
    • /
    • 2002
  • 낮은 에너지의 보론 이온을 선비정질화된 실리콘 기판과 단결정 기판에 이온 주입하여 0.2μm 정도의 접합 깊이를 갖는 박막의 P/sup +/-n 접합을 형성하였다 이온주입에 의한 결정결함의 제거 및 주입된 보론 이온의 활성화를 위해 급속 열처리기를 이용하였으며, BPSC(bore-phosphosilicate glass)를 흐르도록 하기 위해 노 열처리를 도입하였다. 선비정질화 이온주입은 45keV, 3×10/sup 14/cm/sup -2/ Ge 이온을 사용하였으며, p형 불순물로는 BF2 이온을 20keV, 2×10/sup 15/cm /sup -2/로 이온주입 하였다. 급속 열처리와 노 열처리 조건은 각각 1000。C/ 10초와 850。C/4O분이었다. 형성된 접합의 접합깊이는 SIMS와 ASR로 측정하였으며, 4-point probe로 면 저항을 측정하였다. 또한 전기적인 특성은 다이오드에 역방향 전압을 인가하여 측정된 누설전류로 분석하였다. 측정 결과를 살펴보면, 급속 열처리만을 수행하여도 양호한 접합 특성을 나타내나, 급속 열처리와 노 열처리를 함께 고려해야 할 경우에는 노 열처리 후에 급속 열처리를 수행하는 공정이 급속 열처리 후에 노 열처리를 수행하는 경우보다 더 우수한 박막 접합 특성을 나타내었다.