• Journal of Crop Science and Biotechnology
• /
• v.10 no.3
• /
• pp.193-200
• /
• 2007

Mungbean plants generally have a relatively close canopy, thus a large amount of self-shading can reduce yield due to poor light penetration. Modification of leaflet type can affect leaf canopy and could alter seed yield. Two multiple leaflet mutants were obtained from gamma-ray irradiation and used to study the mode of inheritance related to leaflet types and to evaluate their agronomic features. The cross between large-heptafoliate leaflet with small-pentafoliate leaflet mutants produce all $F_1$ plants with normal trifoliate leaflets. The $F_2$ plants segregated in leaflet size and leaflet number into a 9:3:3:1 ratio of large-trifoliate: large-heptafoliate: small-pentafoliate: small-heptafoliate plants, suggesting that independent loci control leaflet size and leaflet number. Regarding leaflet number, the $F_2$ population can be classified into normal-trifoliate, small-pentafoliate, large-heptafoliate, and small-heptafoliate at the dihybrid ratio of 9:3:3:1. The gene symbols $N_1,n_1$ and $N_2,n_2$ are proposed to represent leaflet number. Since no plant was found with large-pentafoliate leaflets, we hypothesize that the $N_2$ allele expresses pleiotropic effect on both leaflet number and leaflet size. Another possibility is that an additional locus with S and s alleles controls leaflet size and S is tightly linked with $N_2$. The effect of multifoliate leaflet on yield and yield components was evaluated in four mungbean families each with four leaflet isolines under three environments. Averaging across the families and environments, the normal-trifoliate and large-heptafoliate lines gave higher yield than small pentafoliate and heptafoliate ones. These two large leaflet lines also had higher leaf area per plant than the other multifoliate lines. Therefore, the mungbean lines with a greater leaf area, which were likely to intercept more sunlight, gave greater yield. Three AFLP markers that were found to be linked to number of leaflets per leaf, corresponded to the N1 allele of the smallpentafoliate parent.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.6
• /
• pp.55-63
• /
• 2013

To offer a basic information for the fibers of commercial leaflets, authors examined and analyzed the distribution, size, and printing types of leaflets sandwiched in the newspaper. The number of different leaflet size were almost 30 in two years including B5 ($182{\times}257mm$), A4 ($210{\times}297mm$), B4, ($257{\times}364mm$), A3 ($297{\times}420mm$), and large flyers such as $545{\times}395mm$, and $790{\times}550mm$. The number of different leaflets size were 25 in 2011, which was reduced to 15 in 2012. Both the number and amount of the leaflets were reduced. The high quality leaflets were issued and distributed in the corporate sector and the leaflets issued in other sectors such as shopkeeping, restaurant business, educational institutions were one-sided leaflets printed on single side of the paper. Compared to the previous year, large stores showed the increased number of leaflets but the number of leaflets from restaurant business and educational institutions and building trade were decreased.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.5
• /
• pp.640-646
• /
• 1997

To determine variations in leaflet length (LL), leaflet width (LW), leaflet size (LS), and leaflet shape index (LSI), and their association with eight agronomic traits, characterization data of 884 soybean accessions which were grown in the autumn of 1992 in Taiwan were analyzed. LL ranged from 4.3 to 14.7 cm, and LW ranged from 2.8 to 9.7 cm. Also, LS (LL $\times$ LW) ranged from 12.1 to 124.6 $\textrm{cm}^2$. The absolute variation of LL, LW, and LS was not large because of limitation in vegetative growth by short day length. None was classified as a large leaflet based on the International Board for Plant Genetic Resources (IBPGR) descriptors. LSI (LL /LW) ranged from 1.21 to 3.06, and three accessions were classified as narrow leaflet. There were differences in ranges and means of LL, LW, LS, and LSI between and within temperate and tropical accessions. LL, LW, LS, and LSI had highly significant positive correlations with seven agronomic traits and highly significant negative correlation with 100-seed weight except LW for all accessions. There was variation in the closeness of association among leaflet traits, and between and within temperate and tropical accessions. Generally, LL, LW, and LS were more closely associated with days to flowering, plant height at $R_1$ and $R_8$, number of pods per plant; LSI was more closely associated with 100-seed weight than other traits.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.3
• /
• pp.243-247
• /
• 2003

To examine ideal leaf types with higher $\textrm{CO}_2$ assimilates and different seed sizes, 12 soybean varieties were planted on the pot in a plastic house covered with glass. Leaf function based on stomatal conductance and $\textrm{CO}_2$ assimilation in soybean is different in seed size and leaflet shape. Mean $\textrm{CO}_2$ assimilation of a single leaf was 19.66 $\mu\textrm{molm}^{-2}\textrm{s}^{-1}$ and showed higher in small seed cultivars with narrow leaflet than that of small seeds with wide leaflet (18.29 $\mu\textrm{molm}^{-2}\textrm{s}^{-1}$), but within large seed groups, it was higher in wide leaflets (19.17 $\mu\textrm{molm}^{-2}\textrm{s}^{-1}$) than narrow leaflet cultivars (17.45 $\mu\textrm{molm}^{-2}\textrm{s}^{-1}$). In small seed and narrow leaflet cultivars, stomatal conductance ranged from 0.14 to 0.15 $\mu\textrm{molm}^{-2}\textrm{s}^{-1}$, while $\textrm{CO}_2$ assimilation ranged from 19 to 20 $\mu\textrm{molm}^{-2}\textrm{s}^{-1}$. The Photosynthetic rate was closely related to stomatal conductance, transpiration and water use efficiency.

• Korean Journal of Plant Taxonomy
• /
• v.44 no.3
• /
• pp.175-177
• /
• 2014

A new speices, Potentilla gageodoensis M. Kim found in Is. Gageodo, Jeollanamdo Province, Korea, is firstly named and described. This species is similar to its related species P. fragarioides in having several characteristics like pinnately compound leaves, pubescent leaf blades and leaf petioles, different leaflets size, absent stolons, etc., but is distinct from P. fragarioides which has thin leaf textures, 7-13 leaflets, elliptic terminal leaflets, small petal size, and ciliate leaflet margin by having thick leaf textures, 5 leaflets, broadly ovate terminal leaflets, large petal size, and densely white ciliate leaflet margin.

• Journal of Chest Surgery
• /
• v.29 no.3
• /
• pp.331-336
• /
• 1996

Four operative cases of aortic valvuloplasty with leaflet extension technique using glutaraldehyde preserved tautologous pericardium are described. All patients had severe aortic regurgitation on preoperative echocardiogram, and Grade W AR on oath-angiogram. The causes of aortic regurgitation were rheumatic fever in 2 cases, degenerative change in 1 case, and 1 case of unknown cause. The autologous pericardium was fixed In a 0.625% glutaraldehyde solution for 15 minutes and rinsed in saline for an additional 15 minutes. Leaflet extension technique varied in 4 patients depending on the site and the extent of the leaflet size and lesion. There was no hospital mortality and no thromboembolic episode without anticoagulation. Post-operative cardiac size was reduced on simple chest film in all cases, and LVESD and LVEDD were reduced on folio w- up echo cardi o gram . This experience permits us to conclude that leaflet extension technique is simple and safe in valve r construction, allowing repair of aortic valves that need to be replaced.

• Journal of Chest Surgery
• /
• v.18 no.2
• /
• pp.299-304
• /
• 1985

The partial A-V canal defect consist of ostium primum type atrial septal defect with a cleft mitral anterior leaflet. The clinical findings depend upon the site and size of the left-to-right shunt, the degree of A-V valvular regurgitation, and the degree of resultant pulmonary artery hypertension. We experienced 3 cases of similar condition. The data were as follow: 1. Chest P-A showed increased pulmonary vascularity and moderate cardiomegaly with left atrial enlargement. 2. E.K.G. showed left axis deviation, left atrial enlargement, and left ventricular hypertrophy. 3. Right heart catheterization showed significant 02 step up of SVC-RA and left-to-right shunt. 4. Left ventriculogram showed mitral regurgitation and filling of both atrium. Operative findings were as follow: 1. Primum type atrial septal defect [2x2 cm]. 2. Cleft in the anterior leaflet of the mitral vave. 3. No evidence of ventricular septal defect and tricuspid anomaly. Through a right atriotomy with moderate hypothermia, the mitral cleft was approximated with interrupted sutures. The interatrial communication was closed by a patch of Dacron/pericardium. The patch was attached to junction of the mitral and tricuspid valves along the crest of the ventricular septum using interrupted sutures and the other site using continuous sutures. Postoperative course was uneventful and discharged in good general condition except postoperative bleeding in case 3.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.5
• /
• pp.43-51
• /
• 2015

This research was performed to investigate the quality of leaflets provided with newspapers. The leaflets were classified according to business types and regions. The physical and strength properties were analyzed. The sizes of leaflets were 2, 4, 8 jeoljis of crown octavo, A3, A4, A5, and B3, B4, B5. Most of them were color printed and both-sides printing was much more popular than one-side printing. The leaflets about electronics, educations, and clothing showed lower density than restaurant business and other areas. The leaflets of electronics, educations, and clothing, and large stores showed lower tensile strength, and those of restaurant businesses and building trades showed relatively high tensile strengths. No differences on the quality of leaflets except for large stores were found according to business areas. Large markets made the leaflets with various types of papers, and low quality papers were also included.

• Journal of Chest Surgery
• /
• v.43 no.6
• /
• pp.602-613
• /
• 2010

Background: As life expectancy has been increased, the cardiac valve disease has been increased. In past, mechanical valve for valve replacement surgery was used widely, but it has many weaknesses, such as hemorrhage, teratogenic effect caused by warfarin, acute mechanical failure, taking warfarin during life, etc. So, the tissue valve is used widely and researches for durability of tissue valve are in progress. Tissue valves being used are all imported in Korea, and there is a lack of information on its geometry and design. So, we studied the geometry of porcine aortic and pulmonary valve, and tried to suggest theoretical basis for making the aortic and pulmonary valve. Material and Method: We harvested aortic and pulmonary valves of 25 pigs and measured the geometry of valve at fresh and glutaraldehyde (GA) fixed state. In each group, we measured the diameter of the base, diameter of commissure, valve height, commissural height, etc. Also, for making implantable porcine and bovine pericardial valve, we designed the valve stent form, thickness, height, and leaflet size, form, thickness by different size of valve. Result: The aortic and pulmonary valve geometry and ratio were measured in each group. The right coronary cusp of aortic valve and right facing cusp of pulmonary valve was bigger than other cusps and non coronary cusp was smaller than others (RCC: NCC : LCC=1 : 0.88 : 1). Valve height was correlated to the leaflet size. We designed the outer diameter of stented porcine aortic valve from 19 mm to 33 mm and designed stent height and width, using previous measured ratio of each structure, stent thickness, working thickness (for making valve). Also, we designed the size of stent and form for stented bovine pericardial valve, considering diameter of valve, leaflet length, height and leaflet minimum coaptation area. Conclusion: By measuring of 25 pig's aortic and pulmonary valve geometry and ratio, we can make theoretical basis for making implantable stented porcine valve and bovine pericardial valve in various size. After making implantable valve using these data, it is necessary to do in vivo and in vitro researches, furthermore.

• Korean journal of applied entomology
• /
• v.37 no.2
• /
• pp.151-157
• /
• 1998

Infestations of two spotted spider mite (TSSM), Tetranychus urticae Koch, on glasshouse rose (Rosa sp.) grown by an arching method, were determined by counts of the number of TSSM per leaflet in Buyeo, Chungnam Province, for a 2-yr period. Binomial sampling plans were developed based on the relationship between mean density per leaflet (m), and proportion of leaflets infested with ( T mites (PT), according to the empirical model In (m) = a+p In (-ln (1 -PT)). T was defined as tally threshold, and set to 1, 3, 5, 7, and 9 mites per leaflet. Increasing sample size had little effects on the precision of the binomial sampling plan, regardless of tally threshold. However, the precision increased with higher tally thresholds. There was a negligible improvement in precision with T ) 7 mites per leaflet. T= 7 was chosen as the best tally threshold for estimating densities of TSSM based on the precision of the model. Independent data set was used to evaluate the model. The binomial model with T= 7 provided reliable predictions of mean densities of TSSM observed on the commercial glasshouse roses.