• 한국멀티미디어학회논문지
• /
• 제13권10호
• /
• pp.1487-1493
• /
• 2010

H.264는 기존의 표준안들보다 좋은 성능을 내기 위해서 더 세밀하고, 더 많은 움직임 정보를 처리한다. 하지만, 움직임 벡터가 기존 표준안에 비해 높은 비율을 차지하게 되어 이에 대한 고려가 필요하게 되었다. 본 논문에서는 움직임 벡터를 효율적으로 처리하기 위해 단말 모드를 사용하는 새로운 방법을 제안한다. 제안하는 알고리즘은 단말 모드를 이용하여 모드들의 분포를 집중시키고, 더 적은 모드 종류를 이용하여 움직임 벡터의 압축을 수행한다. 본 논문에서 제시하는 알고리즘은 현재의 $4{\times}4$ 움직임 벡터 행렬 뿐만 아니라 $8{\times}8$ 행렬 등으로 확장시킬 수 있다. 제안하는 알고리즘은 헤더에서 12.68%, 전체 비트스트립에서 9.7%의 감소율을 보여준다.

• 한국자동차공학회논문집
• /
• 제4권6호
• /
• pp.229-235
• /
• 1996

The tapered leaf spring is regarded as the adequate tool to improve ride quality and to reduce vehicle weight of commercial vehicles. These effects are due to minimizing the contact area of each leaf by reducing the number of leaves and by optimizing the thickness profile of each leaf. But in adapting the tapered leaf spring to improve ride quality, we often have some problems of bad pitching and bouncing motion. This paper shows the basic properties of tapered leaf spring by rig tests and how to improve ride quality of a vehicle with tapered leaf springs, compared with multi-leaf spring. From the results of vehicle tests and rig tests it is concluded that the ride quality was effected by the dynamic spring rate and the friction of the tapered leaf spring.

• Journal of Pharmaceutical Investigation
• /
• 제9권3호
• /
• pp.22-26
• /
• 1979

This report was carried out toxicity test for the mosquito coil made of Ginseng leaf and the residue after extraction of Ginseng root. This results are as follows: In the first group, was not shown any special difference on the body weight, the motion and dissection. In the second group, was not shown any Special difference on the body weight, considerable difference on the motion and considerable loss of appetite besides very slight loss, but came cack soon again to normal state by change of air after a moment. In the third group, the body weight and appetite was depressed very slightly and the motion was shown very slightly difference, but came back soon again to normal state by chenge of air after a moment too. No one was died, and all the animal were the normal state on the reslt of dessection, Therefore, we have positive evidence that this mosquito coil powder is applied to animals without any toxicity.

• 한국컴퓨터정보학회논문지
• /
• 제3권4호
• /
• pp.27-34
• /
• 1998

본 논문에서는 움직임 벡터와 빛의 세기를 이용하여 비디오의 인덱싱과 검색 기법에 대하여 제안한다. 본 논문에서는 움직임 벡터의 특징과 빛의 세기를 계산하여 각 샷 당하나의 대표프레임을 추출하였다. 각각의 대표프레임은 빛의 흐름을 계산하였다. 즉 움직임벡터의 특징은 빛의 흐름으로부터 얻어냈고, BMA 는 움직임 벡터를 찾기 위해 사용했다. 그리고 빛의 세기 값을 히스토그램으로 변환 한 후 컷 검출에 사용하였다. 비디오 프레임의움직임 벡터와 빛의 세기 특징을 기반으로 비디오 데이터를 구성하고 인덱싱 하였다. 비디오 데이터베이스는 비디오의 접근을 위해 내용기반을 제공하고, 인덱스 특징은 B+ 트리 검색을 사용했고, 내부적으로 구성되어 단 노드 방식으로 저장되어 컴퓨터 저장장치에 직접 접근할 수 있게 했다. 본 논문에서는 비디오 데이터 모델을 기반으로 한 비디오 인덱스의 문제를 정의하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.777-781
• /
• 2004

This paper presents a force/displacement sensing system to measure penetration depths and machining forces during pattering operation. This sensing system consists of a leaf spring mechanism and a capacitive sensor, which is mounted on a PZT driven in-feed motion stage with 1nm resolution. The sample is moved by a xy scanning motion stage with 5nm resolution. The constructed system was applied to nano indentation experiments, and the load-displacement curves of silicon(111) and aluminum were obtained. Then, the indentation samples were measured by AFM. Experimental results demonstrated that the developed system has the ability of preforming force/depth sensing indentations

• 한국정밀공학회지
• /
• 제22권12호
• /
• pp.42-50
• /
• 2005

This paper presents an ultra precision machining system using a high sensitive force sensing module to measure machining forces and penetration displacement in a tip-based nanopatterning. The force sensing module utilizes a leaf spring mechanism and a capacitive displacement sensor and it has been designed to provide a measuring range from 80 ${\mu}N$ to 8 N. This force sensing module is mounted on a PZT driven in-feed motion stage with 1 nm resolution. The sample can be moved by X-Y scanning motion stage with 5 nm resolution. In nano indentation experiments and patterning experiments, the machining forces were controlled and monitored by the force sensing module. Then, the patterned samples were measured by AFM. Experimental results demonstrated that the developed system can be used as an effective device in nano indentation and nanopatterning operation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1109-1112
• /
• 2004

This paper presents a high sensitive force sensing module to measure machining forces for a tip-based nanopatterning instrument. The force sensing module utilizing a leaf spring mechanism and a capacitive displacement sensor has been designed to provide a measuring range from 80$\mu$N to 8N. This force sensing module is mounted on a PZT driven in-feed motion stage with 1 nm resolution. The sample can be moved by a X-Y scanning motion stage with 5 nm resolution. In the patterning experiments, the machining forces were controlled and monitored by the force sensing module. Then, the patterned sample was measured by AFM. Experimental results demonstrated that the developed force sensing module can be used as an effective sensing device in the nanopatterning operation.

• 산업기술연구
• /
• 제20권B호
• /
• pp.105-113
• /
• 2000

Air springs are now widely used in bus or truck suspensions due to their advantages over conventional metal spring as coil or leaf springs. Air springs have soft spring rates, which give better ride quality, and additional leveling system provides constant ride height and maintains almost same vertical natural frequencies. A mathematical model of an air spring suspension system with height control system is constructed and dynamic responses of the suspension system are investigated in the light of leveling valve motion characteristic, vertical motion natural frequency. Also, using a full vehicle model, handling characteristics of an air spring suspension is studied and the results are compared with real test results, which shows good agreements.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.667-679
• /
• 2020

As the LNG carrier operates in ice covered waters, it is key to ensure the overall safety, which is related to the coupling effect of ice-breaking process and internal liquid sloshing. This paper focuses on the sloshing simulation of the ice-breaking LNG carrier, and the numerical method is proposed using Circumferential Crack Method (CCM) and Volume of Vluid (VOF) with two main key factors (velocity νx and force Fx). The ship motion analysis is carried out by CCM when the ship navigates in the ice-covered waters with a constant propulsion power. The velocity νx is gained, which is the initial excitation condition for the calculation of internal sloshing force Fx. Then, the ship motion is modified based on iterative computations under the union action of ice-breaking force and liquid sloshing load. The sloshing simulation under the LNG tank is studied with the modified ship motion. Moreover, an ice-breaking LNG ship with three-leaf type tank is used for case study. The internal LNG sloshing is simulated with three different liquid heights, including free surface shape and sloshing pressure distribution at a given moment, pressure curves at monitoring points on the bulkhead. This present method is effective to solve the sloshing simulation during ice-breaking process, which could be a good reference for the design of the polar ice-breaking LNG carrier.

• 전기전자학회논문지
• /
• 제24권2호
• /
• pp.536-542
• /
• 2020

본 논문에서는 광대역 지향성 방사패턴을 가지는 자연에서 영감을 얻은 새싹 모양 안테나를 제안한다. 모션감지 센서 응용을 위해 넓은 빔폭을 가지는 새싹 모양의 기울어진 방사체를 설계하였다. 확장된 잘려진 접지면을 반사기로 작용하도록 하여 지향성 방사패턴을 가지도록 하였다. 평형 방사체를 급전하기 위하여 우수한 진폭 및 위상 평형도를 가지는 광대역 발룬을 활용하였다. 제안된 안테나는 8.5에서 14.5 GHz의 넓은 주파수 대역폭과 넓은 빔폭을 가졌으며, 방사 효율은 90% 정도이었다. 측정된 이득은 4에서 5dBi이며, 전후방비는 10~20dB이었다. 제안된 안테나는 광대역 넓은 빔폭과 지향성 방사패턴을 요구하는 이미징 센서, 위상 배열 시스템 및 레이더 등에 활용될 수 있음을 보였다.