• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.447-454
• /
• 2000

As the AGT system has never operated in Korea, the construction of test track is essential to the acquisition of safety for the passengers. However, the test track is a synthetic system including vehicle, power system, signalling, track etc, several factors must be considered. In this paper, we suggest the general guideline for the test track of AGT system and test items on test track through the investigation of leading test facilities in the world. Through continuous study and investigation, we finally will build the test track to verify the reliability requirements between the train and infrastructures

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.3
• /
• pp.1-13
• /
• 2020

When pedestrians cross a pedestrian crossing during a pedestrian signal, there is a problem that pedestrians are exposed to the danger of traffic accidents due to permissive-left turning and right-turning vehicles. In order to solve this problem, there is an increasing demand to improve the traffic signal system to increase pedestrian safety at the signal crossing. This study aims to examine the feasibility of introducing a leading pedestrian interval(LPI) to prevent conflict between unprotected left and right turn vehicles and pedestrians. In this study, the need for LPI was surveyed by experts and the general public. As a result of the survey, many opinions indicated that the introduction of LPI was necessary. In addition, after selecting the non-protected left and right turn pilot operation targets, LPI was installed on two signal intersections. After installation, the speed analysis of the arrival vehicle in the pedestrian crossing and the violation rate of the pedestrian signal were analyzed. As a result of analysis, when the walking signal was equalized, the speed of the arriving vehicle in the pedestrian crossing was reduced, and the violation rate of the walking signal was improved.

• Journal of the Korean Society of Safety
• /
• v.32 no.6
• /
• pp.16-21
• /
• 2017

Fire or electrical problem while DC electric traction vehicle operation caused by various reasons can lead to not only suspension of the operation, but also severe aftermath such as massive casualty. In this paper, fire analysis on DC electric traction vehicle caused by electrical breakdown on line breaker, which is in connection with the power supply, is presented. When the electric arc, the by-product of frequent line breaker operation, is not fully diminished, it leads to electrical breakdown and fire. Especially, electrical breakdown can be easily induced by the open-and-close operation of inner contractor inside line breaker, eventually followed by ground fault and generation of transient current. Electric arc is consequent on the ground fault and acts as possible ignition source, leading to fire. Also, during the repetitive operation of the line breaker, the contactor is separated each other and some copper powder is generated, and the copper powder provided breakdown path, resulting in fire.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.1
• /
• pp.41-60
• /
• 2018

Recently, road traffic congestion is becoming a serious urban phenomenon, leading to massive adverse impacts on the ecology and economy. Therefore, solving this problem has drawn public attention throughout the world. One new promising solution is to take full advantage of vehicular ad hoc networks (VANETs). In this study, we propose a new traffic congestion detection and quantification method based on vehicle clustering and fuzzy assessment in VANET environment. To enhance real-time performance, this method collects traffic information by vehicle clustering. The average speed, road density, and average stop delay are selected as the characteristic parameters for traffic state identification. We use a comprehensive fuzzy assessment based on the three indicators to determine the road congestion condition. Simulation results show that the proposed method can precisely reflect the road condition and is more accurate and stable compared to existing algorithms.

• Journal of Korean Society for Quality Management
• /
• v.44 no.3
• /
• pp.565-574
• /
• 2016

Purpose: In this study, A reliability assurance model (or reliability program) is proposed to evaluate the reliability of an armed vehicle. The reliability assurance is performed through the reliability-centered activities in the K-000(armed vehicle) of D-Company Methods: By reflecting the current situations of korea defense industry, a reliability assurance model is built up based on the benchmarking results of world leading companies' best practices in same fields. So The reliability growth model is applied the Crow-AMSAA model Results: This research analysis the K-000(armed vehicle) of D-Company using the DT and OT failure data. and application case study by growth model of armed vehicles Conclusion: This research is result of application case study by growth model of armed vehicles.

• KIPS Transactions on Computer and Communication Systems
• /
• v.9 no.6
• /
• pp.131-136
• /
• 2020

In vehicular communications environment, content pre-caching can reduce the delay time from the user to the content server. However, the problem of where and how much pre-caching is still not solved. In this paper, based on the movement probability of the vehicle, we propose a method for pre-caching by distributing the optimized amount of content to each base station candidate that the vehicle will move as follows. First, the movement probability of each vehicle was learned using Markov Model. And the amount of content to be distributed and pre-cached was optimized based on the wireless environment. In experiments based on NS-3, the proposed strategy maintained the least delay compared to the existing protocol, leading to the most traffic-saving results.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.26 no.1
• /
• pp.40-46
• /
• 2012

Cigarette smoking is known to be associated with various chronic pulmonary and cardiovascular diseases ranging from inflammation to cancer. Not only first-hand smoke but also second-hand smoke is suggested to be a factor of health risk. This study was to investigate whether Platycodi Radix extract administration would alter oxidative stress in lung leading to protection of cigarette smoke-induced lung damage. Sprague-Dawley rats were randomly divided into 3 groups; Intact, Smoke+PR and Smoke+Vehicle. In Smoke+PR and Smoke+Vehicle group, the exposure to cigarette smoke was performed for 15 min/day for 4 weeks in ventilated smoking chamber. The Platycodi Radix extract and saline were orally administrated to Smoke+PR and Smoke+Vehicle group each. The rats of Intact group were just kept in ventilated chamber without cigarette smoke. After the experiment for 4 weeks, the lung tissues were collected for histological observation and immunohistochemistry. In Results, airspace enlargement and goblet cell hyperplasia were observed after 4 weeks' exposure to cigarette smoke. Whereas, the oral administration of Platycodi Radix extract for 4 weeks reduced airspace enlargement and goblet cell hyperplasia. Moreover, the alterations of BAX/Bcl-2 proteins in lung tissues were observed. These results suggest that Platycodi Radix extract ameliorates lung damage in cigarette smoke-exposed rats and has protective effects on second-hand smoke injury.

• Science of Emotion and Sensibility
• /
• v.21 no.1
• /
• pp.17-34
• /
• 2018

The era of fully autonomous vehicles which can travel to their destination completely, is expected to arrive in the near future. The automobile industry will face a huge change in the near future. It makes the industry in the midst of a major turning point, since the automobile was born in the late 1800s. It is expected that the fully autonomous vehicle will be defined as a part of a living space beyond the concept of transportation. However, the existing research on the interior design of the fully autonomous vehicle is insufficient. The purpose of this study is to propose a design method of interior space through analyzing in-vehicle activities, which is a fundamental design element that can satisfy user's emotional experience suitable the concept of living space. For this purpose, the consumer's consciousness about the in-vehicle activity of fully autonomous vehicle was investigated. As a result, domestic consumers perceived the needs of in-vehicle activities related to resting, listening and watching activities such as 'sleeping and resting', 'watching TV and movie', 'listening to music' among 'self - centered' activities. Based on the results of the investigation, this study will suggest a design method of interior design of the fully autonomous vehicle. This study is meaningful, because it is a leading research that suggests new ways of designing interior space by analyzing consumer's needs in a quantitative method.

• Journal of Korean Society of Transportation
• /
• v.33 no.4
• /
• pp.405-416
• /
• 2015

This paper developed a method analyze drivers' response characteristics using spectral analysis with car following data. Cross-correlation function and cross spectrum are produced by Fourier transform from speed fluctuations of leading vehicle and following vehicle during the designated time ${\tau}$. Based on the analysis data, a process to calculate the reaction time and stimulus-adaption index of following vehicle was developed and 170 cases of field data was applied. It was reported average of 0.654 and 2.091 seconds of stimulus-adaption index and reaction time respectively. In conclusion, the developed indexes might contribute to enhance vehicle control of autonomous vehicle more efficient and safer.

• Wind and Structures
• /
• v.27 no.6
• /
• pp.399-416
• /
• 2018

In order to reveal the independent relationship between track irregularity and wind loads, the stochastic characteristics of train-bridge coupling systems subjected to wind loads were investigated by the multi-sample calculation. The vehicle was selected as 23 degrees of freedom dynamical model, and the bridge was described by three-dimensional finite element model. It was assumed that the wind loads were random processes with strong spatial correlation, while the track irregularities were stationary random ones. As a case study, a high-speed train running on a cable-stayed bridge subjected to wind loads was studied. The effect of rail irregularities was deemed to be independent of the effect of wind excitations on the coupling system in the same wind circumstance for the same project, leading to the conclusion that the effect of wind loads and moving vehicle could be calculated separately. The variance results of the stochastic responses of vehicle-bridge coupling system under the action of wind loads and rail irregularities together were equivalent to the sum of the variance of the responses induced by each excitation. Therefore, when one of the input excitations is different, only the effect of changed loads needs to be assessed. Moreover, the new calculated results were combined with the effect of unchanged loads to present the stochastic response of coupling system subjected to the different excitations, reducing the cost of computations. The stochastic characteristics, the CFD (cumulative distribution function) of the coupling system with different wind velocities, vehicle speed, and vehicle marshalling were studied likewise.