• The Korean Journal of Mycology
• /
• v.11 no.4
• /
• pp.159-162
• /
• 1983

The dried carpophores of Sarcodon aspratus were examined for mineral elements and a protein-polysacccharide. Calcium, iron, zinc, magnesium, manganese, copper, lead, cadmium and mercury were detected in that order of contents by atomic absorption spectrometry and automatic mercury analysis. The protein-polysaccharide fraction extracted from the carpophore was found to contain 31.5% protein and 52.8% polysaccharide. The fraction showed no antitumor activity against sarcoma 180 implanted in mice.

• Journal of the Korean Chemical Society
• /
• v.48 no.6
• /
• pp.590-598
• /
• 2004

The preconcentration and determination of trace Cu(II) and Pb(II) on calcium alginate beads in aqueous solution were studied. A calcium alginate beads were prepared by adding an alginic acid to sample solution contained Ca(II). Some following conditions were optimized: the pH of sample solution, amount of alginic acid, and stirring time for effective adsorption; the type and concentration of acid, and sonication time in an ultrasonic vibrator for the perfect de-sorption. A sample solution was prepared with Cu(II) and Pb(II) in DI water. And Ca(II) and ethanol was added into the sample solution. The pH of the final sample solution was controlled with buffer solution. The alginic acid were dispersed in the sample solution by a magnetic stirrer. This mixture was stored in room temperature for 30 min to form a calcium alginate. After the beads were filtered and washed on a membrane filter, the analytes were redissolved from the beads by an ultrasonic vibration of 10 minutes in 1.0M $HNO_3$ solution. The effect of diverse ions on the adsorption of analytes were studied. This procedure was applied for the analysis of two real samples. The recoveries in spiked samples were $90.4{\sim}104.3%$ for analytes.

• Environmental Engineering Research
• /
• v.11 no.1
• /
• pp.54-61
• /
• 2006

An electron probe microanalysis (EPMA) investigation can provide quantitative and qualitative insight into the nature of the surface and bulk chemistry on solidified waste forms(SWF). The proportion of Pb in grain areas is below 0.3 wt. %, and the proportion near the border of the grain slightly increases to 0.98 wt. % but in the inter-particle areas farther from the grain, the concentration of Pb markedly increases. It is apparent that very little Pb diffuses into the tricalcium silicate($C_3S$) particles and most of the Pb exists as precipitates of sulfate, hydroxide, and carbonate in the cavity areas between $C_3S$ grains. Calcite additions on Pb-doped SWF are also observed to induce deeper incorporation of lead into the cement grains with EPMA line-analysis of cross-sections of cement grains. The line-analysis reveals the presence of $0.2{\sim}5$ weight % Pb over $5\;{\mu}m$ from cement grain boundaries. In the inter-particle areas, the ratio of Ca, Si, Al and S to Pb is relatively similar even at some distance from the grain border and the Pb (wt. %) ratio is reasonably constant throughout the whole inter-particles area. It is apparent that the enhanced development of C-S-H on addition of calcite can increasingly absorbs lead species within the silica matrix.

• 보존과학연구
• /
• s.15
• /
• pp.59-103
• /
• 1994

Painting is well regarded as a stratified structure by the conservators and restorers. Hence, the scientific methods have been developed for the study of the interal layer of paintings. Examples of such methods are X-ray, infra-red, and ultra-violet photography. A more direct method is to look at the painting in cross section under the microscope and to analyze pigments using an electron probe X-ray micro analyzer(EPMA).In this research, I study and analyze twenty two Korean paintings of self-portraits including the first oil painting of Hui Dong Koh's self-portrait stored in the museum of Tokyo National University of Fine Arts and Music, employing these scientific techniques. The small fragments taken from the ground layers of the early oil paintings(1915∼1942)are analyzed using the EPMA. According to their main materials, the ground layers can be classified into five types ; 1. Lead white layer and double layer of calcium carbonate and lead white, 2. Zinc white with some mixiture of lead white, 3.Titanium white with some barium white, 4. Barium white, 5.Double layer of titanium white and zinc white.

• Journal of the Korean institute of surface engineering
• /
• v.39 no.6
• /
• pp.302-311
• /
• 2006

Nowadays the open-type lead-acid battery for vehicle use is being replaced with the sealed-type because it needs no maintenance and has a longer cycle life. Thus researches on this battery are being conducted very actively by many advanced battery companies. There is, however, a serious problem with the maintenance free(MF) battery that its cathode electrode has a limited cycle life due to a corrosion of grid. In this study, it was aimed to improve a corrosion resistance of the cathode grid which is commonly made of Pb-Ca alloy for a mechanical strength. For this purpose, various amounts of alloying elements such as Sn, Ag and Ba were added singly or together to the Pb-Ca alloys and investigated their corrosion behaviors. Batteries fabricated by using these alloys as cathode grids were subjected to life cycle test and their corrosion layers appeared at the interface between the grids and the active materials were carefully observed in order to clarify effects of alloying elements.

• Clinical and Experimental Pediatrics
• /
• v.46 no.2
• /
• pp.198-202
• /
• 2003

Of all toxic inhalant exposures, chlorine is one of the most common toxic chemical inhalants. When acutely inhaled, it can be responsible for symptoms ranging from upper air way irritation to more serious respiratory effects. It can also deteriorate lung function and lead to death. Chlorine and its compounds such as chlorinated cyanurates and hypochlorites are commonly used in water disinfection. The chemical agents discussed in this article are sodium dichloroiso cyanurate and calcium hypochlorite which are the two most popular products for swimming pool chlorination. They are both strong oxidizing agents which are soluble in water. Between the above two alkali agents, acid-base interaction occurred and generated heat. And the acid drove the combination of hypochlorous and chloride ions to form chlorine gas. We have experienced, two boys who had inhalation injuries caused by an accidental explosion which occurred in a swimming pool by mixing two different chlorinating agents : sodium dichloroiso cyanurate and calcium hypochlorite. The children suffered from respiratory difficulties after the exposure. They both required intensive care management and one needed the support of mechanical ventilation.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.48 no.5
• /
• pp.589-595
• /
• 2015

Alginates are used to encapsulate various materials, including food, cosmetics, and pharmaceuticals. This study examined the properties and oxidation stability of fish oil capsules manufactured with calcium alginate gels. The fish oil capsules were manufactured by dropping sodium alginate solution and fish oil into a calcium chloride solution through nozzles. The membrane thickness, sphericity, rupture strength and deformation depth of the fish oil capsules were determined. The peroxide value of the fish oil was assayed to determine the oxidation stability of the capsules. The capsules measured approximately 3 mm with a membrane thickness of 90 μm independent of the amount of fish oil added. As the amount of fish oil encapsulated increased, the sphericity, rupture strength and deformation depth of the capsules decreased. The encapsulation efficiency increased until the amount of fish oil was 30%. The oxidation stability of fish oil in capsules was dependent on the type of nozzle, e.g., the oxidation stability of fish oil in capsules made using a double nozzle was greater than with a single nozzle. These results should lead to industrial application of fish oils including eicosapentaenoic (EPA) and docosahexaenoic (DHA) acids, as nutraceuticals.

• Journal of Periodontal and Implant Science
• /
• v.36 no.2
• /
• pp.567-577
• /
• 2006

Background Several bone grafting materials have been used in sinus augmentation procedures. Macroporous Biphasic Calcium Phosphate($MBCP^{TM}$) consists of the mixture of 60% HA and 40% ${\beta}-TCP$. Therefore, it can provide good scaffold for the new bone to grow owing to HA, in the other hand, it can have bioactivity for bone remodeling owing to ${\beta}-TCP$. The purpose of this study was to evaluate bone formation following maxillary sinus augmentation using $MBCP^{TM}$ by means of histologic analysis. Material and Method $MBCP^{TM}$ was placed as a primary bone substitute for maxillary sinus augmentation. Three patients were selected after evalaution of their medical dental examination. $MBCP^{TM}$ only, $MBCP^{TM}$ combined with Irradicated cancellous bone and $MBCP^{TM}$ combined with autogenous bone were used for each patient. After about eight months, bone biopsies were harvested for histologic evaluation and fixtures installed. Results Eight months after surgery we observed new vital bone surrounding $MBCP^{TM}$ particle and the amount of new bone was about 30% even though there were discrepancies between specimens. This case report documents that $MBCP^{TM}$ when used as a grafting material for sinus floor augmentation whether combined other bone graft material or not, may lead to the predictable results for dental implants on posterior maxillary area with insufficient vertical height for fixture installation.

• Journal of the Korean Society of Radiology
• /
• v.85 no.2
• /
• pp.270-296
• /
• 2024

Coronary CT angiography (CCTA) is recognized for its role as a gatekeeper for invasive coronary angiography in patients suspected of coronary artery disease because it can detect significant coronary stenosis with high accuracy. However, heavy plaque in the coronary artery makes it difficult to visualize the lumen, which can lead to errors in the interpretation of the CCTA results. This is primarily due to the limited spatial resolution of CT scanners, resulting in blooming artifacts caused by calcium. However, coronary stenosis with high calcium scores often requires evaluation using CCTA. Technological methods to overcome these limitations include the introduction of high-resolution CT scanners, the development of reconstruction techniques, and the subtraction technique. Methods to improve reading ability, such as the setting of appropriate window width and height, and evaluation of the position of calcified plaque and residual visibility of the lumen in cross-sectional images, are also recommended.

• Journal of Preventive Medicine and Public Health
• /
• v.24 no.4 s.36
• /
• pp.516-530
• /
• 1991

A case-control study was conducted to investigate the effect of low-level blood lead on the blood pressure. The plasma renin activity(PRA) was measured also to investigate one of the possible mechanisms by which lead nay play a role to influence on the blood pressure. Seventy-two hypertensive and sixty -nine control study subjects were selected from the workers who had no history of b-related lead exposure, in Ulsan city and it's vicinity, Korea. In addition to measuring blood lead levels and PRA, body mass index(BMI), hematocrit, serum sodium, potassium, creatinine, ionized calcium, and cholesterol were measured. Also, the habits of smoking, alcohol drinking and family history of hypertension were checked. The blood lead level of the hypertensive group was $19.8{\pm}5.5{\mu}g/dl$, which was significantly higher than that of the control group, $12.5{\pm}4.7{\mu}g/dl$(p<0.01). On multiple logistic regression analysis, the odds ratio of blood lead level on the occurence of high blood pressure was 1.38, also statistically significant (p<0.01). There was no significant differences between the hypertensive and the control group in the PRA or In (PRA), but there was a marginally significant linear relationship between blood lead and PRA in the hypertensive group(p<0.1). In conclusion, blood lead level which has been known to be within normal limits may be one of the possible risk factors of hypertension and PRA alteration by lead may act as one of the mechanisms.