• Analytical Science and Technology
• /
• v.15 no.4
• /
• pp.381-387
• /
• 2002

In this study, we introduced experience participated in ELPAT (Environmental Lead for Proficiency Analytical Testing) program that is administered by the American Industrial Hygiene Association and EPA. The 126 sample results of total 128 samples met reference value, as a result accepted 'proficient'. The concentration of Pb in air, paint chips, soils and dust wipes are $0.0089{\sim}0.3956mg/m^3$, 0.0500~8.9149%, 29.0${\sim}$1697 mg/kg and $18.00{\sim}900.3{\mu}g/sample$, respectively. The lead in environmental matrix prepared adequate techniques and analysed by flame atomic absorption spectrometry. The lead in air was extracted hydrochloric acid, in paint chips and soils were digested with microwave and hotplate and in dust wipes were prepared microwave digestion. No differences of each preparation techniques was found and all methods were to be proper.

• Korean Journal of Clinical Laboratory Science
• /
• v.41 no.3
• /
• pp.105-110
• /
• 2009

Yellow sand (or Asian dust) occurs mainly in spring in East Asia. Yellow sand from China and its surrounding regions transports air pollutants, such as aerosols, ozone, and heavy metals. The outdoor workers are frequently exposed to heavy metals during yellow sand phenomenon. This study was carried out to investigate the heavy metal levels in blood among 75 outdoor workers (exposed group) and 86 indoor workers (controled group) in Gyeonggi province from March 2008 to May 2009. Heavy metal levels in blood were analyzed by atomic absorption spectrophotometer. Mean blood lead levels in exposed group and controled group were $5.19{\pm}1.64{\mu}g/dL$, $4.24{\pm}1.34{\mu}g/dL$, respectively. Mean blood cadmium levels in exposed group and controled group were $1.28{\pm}0.89{\mu}g/dL$, $0.90{\pm}0.59{\mu}g/dL$, respectively. Lead and Cadmium levels in blood of exposed group were significantly higher than those of controled group. In the comparison of smoking status, lead and cadmium levels of smokers were significantly higher than those of non-smokers. In conclusion, the heavy metal levels of outdoor workers were significantly higher than those of indoor workers. And smoking was hazardous factor to elevate heavy metal levels in blood.

• Journal of the Korea Society for Simulation
• /
• v.29 no.1
• /
• pp.39-46
• /
• 2020

The utilization of artificial intelligence (AI) in the engagement has been a key research topic in the defense field during the last decade. To pursue this utilization, it is imperative to acquire a realistic simulation to train an AI engagement agent with a synthetic, but realistic field. This paper is a case study of training an AI agent to operate with a hardware realism in the air-warfare dog-fighting. Particularly, this paper models the pursuit of an opponent in the dog-fighting setting with a gun-only engagement. In this context, the AI agent requires to make a decision on the pursuit style and intensity. We developed a realistic hardware simulator and trained the agent with a reinforcement learning. Our training shows a success resulting in a lead pursuit with a decreased engagement time and a high reward.

• Atmosphere
• /
• v.21 no.1
• /
• pp.109-121
• /
• 2011

This study revisits the definition of Changma, which is the major rainy season in Korea and corresponds to a regional component of the East Asian summer monsoon system. In spite of several decades of researches on Changma, questions still remain on many aspects of Changma that include its proper definition, determination of its onset and retreat, and relevant large-scale dynamical and thermodynamical features. Therefore, this study clarifies the definition of Changma (which is a starting point for the study of interannual and interdecadal variability) using a basic concept of air mass and front by calculating equivalent potential temperature (${\theta}_e$) that considers air temperature and humidity simultaneously. A negative peak in the meridional gradient of this quantity signifies the approximate location of Changma front. This front has previously been recognized as the boundary between the tropical North Pacific air mass and cold Okhotsk sea air mass. However, this study identifies three more important air masses affecting Changma: the tropical monsoon air mass related to the intertropical convergence zone over Southeast Asia and South China Sea, the tropical continental air mass over North China, and intermittently polar continental air mass. The variations of these five air masses lead to complicated evolution of Changma and modulate intensity, onset and withdrawal dates, and duration of Changma on the interannual time scale. Importantly, use of ${\theta}_e$, 500-hPa geopotential height and 200 hPa zonal wind fields for determining Changma onset and withdrawal dates results in a significant increase (up to~57%) in the hindcast skill compared to a previous study.

• Journal of Mechanical Science and Technology
• /
• v.15 no.4
• /
• pp.459-464
• /
• 2001

The effects of internal air-pressing on deep drawability are investigated in this study to increase the deep drawability of aluminum sheet. The conventional deep drawing process is limited to a certain limit drawing ratio(LDR) beyond which failure will occur. The intention of this work is to examine the possibilities of relaxing the above limitation through the deep drawing with internal air-pressing, aiming towards a process with an increased drawing ratio. The idea which may lead to this goal is the use of special punch that can exert high pressure on the internal surface of deforming sheet during the deep drawing process. Over the ranges of conditions investigated for Al-1050, the local strain concentration at punch nose radius area was decreased by internal air-pressing of punch, and the deep drawing with internal air-pressing was proved to be very effective process for obtaining higher LDR.

• Korean Journal of Medicinal Crop Science
• /
• v.26 no.4
• /
• pp.291-295
• /
• 2018

Background: The use of Rehmannia glutinosa of the family Scrophulariaceae, in traditional medicine is well known. This study was conducted to elucidate the effect of air curing of the seed rhizome of R. glutinosa on its storability and yield. Methods and Results: The root of the R. glutinosa cultivar (Dagang) was harvested in at the end of November. The seed rhizomes were air cured for one to seven days. They were subsequently wrapped with newspaper and further stored in a plastic container at $1^{\circ}C$. It was observed that the weight loss and decay rates were significantly lower in the air cured seeds than in the untreated ones. Moreover, the decay rate of the control was approximately 50%, 120 days after storage. However. the decay rate of all the air cured treatment groups was less than 1%. Additionally, air curing led to an increase in the germination rate of the seeds and the root yield when compared with the untreated groups. Taken together, the ideal treatment period for air curing was found to be 3 days. Under these conditions, the germination rate and yield were 88.7% and 2,185 ㎏/10a, respectively. Conclusions: This study successfully demonstrated that the air curing of seed rhizomes can lead to a considerable increase in the storability and yield of R. glutinosa.

• Current Research on Agriculture and Life Sciences
• /
• v.32 no.2
• /
• pp.67-73
• /
• 2014

Mulberry fruits were semi-dried using hot air ($60-100^{\circ}C$) or cool air ($20-40^{\circ}C$), and the effects of the drying temperature and processing time on the quality of the final dried mulberry fruits were investigated. Response surface methodology was employed to establish a statistical model and predict the conditions resulting in minimal loss of the total phenolic content (TPC) and ascorbic acid. Thus, using overlapped contour plots, the optimal conditions for producing semi-dried mulberry fruits, which reduced the moisture residue to 45% and minimized the nutrient losses of TPC and ascorbic acid, were determined for the hot-air process ($60.7^{\circ}C$ for 5.4 h) and cool-air process ($34.8^{\circ}C$ for 23.3 h). Plus, a higher drying temperature was found to lead to a faster loss of moisture and ascorbic acid, while the TPC was significantly decreased in the cool-air dried mulberry fruits due to the higher activity of polyphenol oxidase between 30 and $40^{\circ}C$.

• Journal of the Korea Computer Graphics Society
• /
• v.23 no.1
• /
• pp.17-24
• /
• 2017

We propose an efficient method to express water spray effects by adaptively modeling air particles in particle-based water simulation. In real world, water and air continuously interacts with each other around free surfaces and this phenomenon is commonly observed in waterfall or sea with rough waves. Due to thin spray water, the interfaces between water and air become vague and the interactions between them lead to heavy vortex phenomenon. To express this phenomenon, we propose methods of 1) generating adaptive air cell in particle-based water simulation, 2) expressing water spray effects by creating and evolving air particles in the adaptive air cells, and 3) guaranteeing robustness of simulation by solving drifting problem occurred when adjacent air particles are insufficient. Experiments convincingly demonstrate that the proposed approach is efficient and easy to use while delivering high-quality results.

• Journal of the military operations research society of Korea
• /
• v.37 no.1
• /
• pp.147-159
• /
• 2011

Recently, the military service period has been shortened continuously. Meanwhile, more skilled airmen are needed as the complexity of weapon systems increase. This phenomenon could lead to a disastrous result such as deteriorating the level of the readiness and the fighting power. We suggest a method to improve recruit's maintenance capability rapidly by assigning airmen to jobs appropriate to their characteristics using Datamining methods (K-menas and CART). We focus on the assigning method for air force's air-munition maintenance airmen since they are requested more skilled than other airmen. Grouping airmen with k-means method and devising classification rule with CART algorithm, we found that airmen's proficiency arrival period could be shortened by 1.79 months when they are assigned in the suggested way.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.7
• /
• pp.1092-1100
• /
• 2004

This paper describes the application of fault tree technique to analyze of compressor failure. Fault tree analysis technique involves the decomposition of a system into the specific form of fault tree where certain basic events lead to a specified top event which signifies the total failure of the system. In this research. fault trees for failure analysis of screw type air compressor are made. This fault trees are used to obtain minimal cut sets from system failure and system failure rate for the top event occurrence can be calculated. It is Possible to estimate air compressor reliability by using constructed fault trees through compressor failure example. It is Proved that FTA is efficient to investigate the compressor failure modes and diagnose system.