• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.4
• /
• pp.361-371
• /
• 2009

Resistivity tomography is very effective geophysical method to find out the resistivity distribution and its change in time around a tunnel. Thus, the resistivity tomogram can provide helpful information which is necessary for the effective maintenance of the tunnel. However, an air filled tunnel severely distorts tomography data, especially when the current or potential electrode is placed near the tunnel. Moreover, the distortion can often lead to misinterpretation of tomography monitoring data. To solve these problem, we developed a resistivity modeling and time-lapse inversion program which include a tunnel. In this study, using the developed program we assured that the inversion including a tunnel gives much more accurate image around a tunnel, compared with the conventional tomogram where the tunnel is not included. We also confirmed that the time-lapse inversion of resistivity monitoring data defines well resistivity changed areas around a tunnel in time.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.39 no.4
• /
• pp.229-236
• /
• 2023

Maxillary bone defects may follow surgical treatment of benign and malignant tumors, trauma, and infection. Palatal defects often lead to problems with swallowing and pronunciation from the leakage of air into the nasal cavity and sinus. Obturators have been commonly used to solve these problems, but long-term use of the device may cause irritation of the oral mucosa or damage to the abutment teeth. Utilizing implants in the edentulous area for the fabrication of the obturators has gained attention. This case report describes a patient, who had undergone partial resection of the maxilla due to adenocarcinoma, in need of a new obturator after losing abutment teeth after long-term use of the previous obturator. Implants were placed in strategic locations, and an implant-retained maxillary obturator was fabricated, showing satisfactory results in the rehabilitation of multiple aspects, including palatal defect, masticatory function, swallowing, pronunciation, and aesthetics.

• Journal of The Korean Association For Science Education
• /
• v.28 no.5
• /
• pp.383-394
• /
• 2008

We analyzed the description of diffusion phenomena in a 7th-grade textbook, and investigated teachers' understanding and teaching methods on diffusion concepts. The data were collected from textbook analysis and questionnaires from 46 science teachers and interviews with 5 teachers. Based on texts' analysis by definition, example, and representation of the diffusion, we found that most of the representations were macroscopically explained by observing the movement of ink in water and smelling the fragrance of perfume in the air. The analysis of questionnaire and interviews also revealed that the definition and the explanation of the diffusion were too abstract for teachers to understand and teach the concept without further information about the microscopic concept of collision of the matter with the medium. Such examples and models lead science teachers to form indistinctive concepts such as dissolution, effusion, and evaporation. Furthermore, the analytical data showed that teachers' understanding of the diffusion concept has been heavily dependent upon the textbook and the level of the understanding was very similar with that of textual description.

• 보존과학연구
• /
• s.25
• /
• pp.119-132
• /
• 2004

Annals of the Joseon Dynasty is the authentic record of the historical facts and events taken place throughout the entire period of 472 years(25 generations, 1392~1863)described in a chronological order. The tremendous volume of the records contains the factual events taken place in almost all the fields of the Joseon Dynasty ranging from politics, economy to history of the dynasty. Not only because of its affluent contents but also with the precision of its records, it was designated as the National Treasure No. 151 in1973 by the Korean government and also registered as the Memory of the World by UNESCO in October 1997.This study is to report a exhaustive investigation results on the conservation state of annals of the Joseon Dynasty, especially Mt. Jeongjoksan edition, under the storage of the Kyujanggak in order to obtain the current condition, and thereby to estimate the any deterioration of the waxed volumes in the future. According to results of the investigation, we are going to verify damage causes of annals of the Joseon Dynasty, and to consider scientific conservation methods for the permanent preservation of invaluable cultural heritage. The major problem with the preservation of annals has arisen particularly from the deterioration of the waxed volumes of the Mt. Jeongjoksan edition. In order to provide for the counter measures for this problem, we have conducted twice investigations(first :1998~1999, second : 2003) to the internal and external conditions of waxed volumes(Annals of King Taejo~Annals of King Myeongjong).The result of the investigation has indicated that the paper quality of the some of the waxed volumes (Annals of King Taejong~Annals of King Sejong) is cracked and folded and the pages are imbedded to each other due to the hardened or congealed wax on the paper. Some of the pages are even getting moldy. And in order to detect as to whether“ there has been any deterioration progressed to the waxed books in the modern storage facility of the Kyujanggak equipped with constant temperature and humidity condition, the first investigation(1998~1999) and the second investigation(2003) have recorded the values of acidity, whiteness and moisture rate of the waxed paper, reporting an observation that there has been no difference on the measuring items. This indicates that no virtual deterioration has been progressed so far to the waxed volumes preserved in the Kyujanggak. Also, except for the causes of deterioration to the paper by insects and microorganisms, the major cause for the paper damage seems to the change of moisture of the paper caused from the alteration of the temperature and humidity of the storage environment. With this understanding in mind, we have conducted an environmental investigation on the three selected points of the storage in the aspects of the temperature, humidity, air current, $CO_2$,HCHO, and $SO_2$.It has been observed that the temperature stood at $16.9^{\circ}C~20.2^{\circ}C$ and the humidity was stable between 53%~56% during the period of the investigation. The concentration of the carbon monoxide and carbon dioxide of the storage were very similar to those in the air. These data lead to presume that there is no problem in the aspect of carbon oxidization. But the concentration of sulfur dioxide, hydrogen sulfide and formaldehyde of the storage were detected a little higher than those of standard. Therefore, we consider that it is necessary to ventilate the internal air of the store room by means of operating air purification devices.

• Korean Journal of Environmental Agriculture
• /
• v.11 no.3
• /
• pp.185-193
• /
• 1992

To investigate differences in lead content in soils and paddy rices, affected by air pollutants from the Janghang Smelter, soil samples at the different directions, distances, and depths, surface(0-15cm depth) and subsurface(15-30cm depth) in 1982 and 1990, and rice plants at soil sampling sites in 1990 were separately collected at the Janghang Smelter area affected by combustible waste gas from the smelter chimney. Soil samples were extracted with $4M-HNO_3$ and plant samples were digested with mixture of $HNO_3$ and $HCIO_4$ for analyzing by atomic absorption spectrophotometry. The Pb contents in soils ranged from 10.3 to 644.8mg $kg^{-1}$. The average content in 1990 was higher than that in 1982. The Pb content in soils at sites nearer the center of the smelter was higher than that at sites farther from the center. The highest lead content was found at the east direction, and was low in order of east>north-north east>north east > north. The variation of Pb level in soils at east sites was more considerable than other directions. The Pb level in surface soils was higher than that in subsurface soils. The contaminated radius of Pb was until 3km all at east, north-north east and north east. A significant correlation was found between Pb content in surface soils of 1982 and that in surface soils of 1990, between Pb content in soils and contents of Cd and Zn in soils, and between Pb content in soils and soil properties as organic matter, available silicate, cation exchange capacity, exchangeable $Ca^{++}$, $Mg^{++}$ and $Na^+$. Pb content in brown rice was low in the panicle axis, and brown rice, and Pb content in stem was 3.26 times of that in brown rice. Pb content in brown rice ranged from 2.2 to 9.0 mg $kg^{-1}$.

• Journal of Chest Surgery
• /
• v.36 no.7
• /
• pp.527-530
• /
• 2003

Reexpansion pulmonary edema is a rare complication of the treatment of lung collapse secondary to pneumothorax, pleural effusion, or atelectasis. But occasionally, severe morbidity and death may result. Reexpansion pulmonary edema occurs when chronically collapsed lung is rapidly reexpanded by evacuation of large amounts of air or fluid. In the treatment of the chronically collapsed lung, physicians must remember the possible events and prevent the complications. When the difference in airway resistance or lung compliance between the two lungs is exaggerated, conventional mechanical ventilation might lead to preferential ventilation with hyperexpansion of one lung and gradual collapse of the other. Differential ventilation has been advocated to avert this problem. By differential lung ventilation, we successfully treated a severe reexpansion pulmonary edema in two patients. Therefore we suggest that differential lung ventilation is the treatment of choice for severe reexpansion pulmonary edema.

• Composites Research
• /
• v.27 no.4
• /
• pp.174-181
• /
• 2014

This study describes viscoelasticity analysis of carbon-fiber reinforced polymer matrix composite material. One of the most important problem during high temperature molding process is residual stress. Residual stress can cause warpage and cracks which can lead to serious defects of the final product. For the difference in thermal expansion coefficient and change of resin property during curing, it is difficult to predict the final deformed shape of carbon-fiber reinforced polymer matrix composite. The consideration of chemical shrinkage can reduce the prediction errors. For this reason, this study includes the viscoelasticity and chemical shrinkage effects in FE analysis by creating subroutines in ABAQUS. Analysis results are compared with other researches to verify the validity of the subroutine developed, and several stacking sequences are introduced to compare tested results.

• Journal of Environmental Impact Assessment
• /
• v.9 no.4
• /
• pp.271-276
• /
• 2000

The research centers on the health risk assessment of airborne toxic metals in Taejon third and fourth industrial complexes. Total suspended particulates were collected on glass microfibre filters by high volume air samplers. Fifteen toxic metals including 6 carcinogenic metals were analyzed by ICP-MS and ICP-AES after the pre-treatment of mixed acid extraction. The following results were summarized from the research : 1) the concentrations of TSPs were $17.7{\sim}219.6{\mu}g/m^3$ while the arithmetic mean concentration was $101.7{\mu}g/m^3$; 2) the arithmetic mean concentrations of human carcinogens such as arsenic, hexavalent chromium and nickel subsulfide were 10.22, 6.96 and 6.42 $ng/m^3$, respectively while those of probable human carcinogens such as beryllium, cadmium and lead were 0.13, 3.41, 97.65 $ng/m^3$, respectively; 3) the point risk estimate for the inhalation of carcinogenic metals was $1.5{\times}10^{-4}$, which was much higher than a risk standard of $10^{-5}$; 4) approximately 93% of the cancer risk were to the inhalation of human carcinogens, arsenic and hexavalent chromium, which should be properly managed in Taejon third and fourth industrial complexes.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.6
• /
• pp.599-608
• /
• 2017

Cracks on the asphalt road surface can affect the speed of the car, the consumption of fuel, the ride quality of the road, and the durability of the road surface. Such cracks in roads can lead to very dangerous consequences for long periods of time. To prevent such risks, it is necessary to identify cracks and take appropriate action. It takes too much time and money to do it. Also, it is difficult to use expensive laser equipment vehicles for initial cost and equipment operation. In this paper, we propose an effective detection method of road surface defect using ROI (Region of Interest) setting and cany edge detection method using UAV image. The results of this study can be presented as efficient method for road surface flaw detection and maintenance using UAV. In addition, it can be used to detect cracks such as various buildings and civil engineering structures such as buildings, outer walls, large-scale storage tanks other than roads, and cost reduction effect can be expected.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.11
• /
• pp.1330-1338
• /
• 2011

Social activities of the elderly have been increasing as our society progresses toward an aging society. As their activities increase, so does the occurrence of falls that could lead to fractures. Falls are serious health hazards to the elderly. Therefore, development of a device that can detect fall accidents and prevent fracture is essential. In this study, we developed a portable fall detection system for the fracture prevention system of the elderly. The device is intended to detect a fall and activate a second device such as an air bag deployment system that can prevent fracture. The fall detection device contains a 3-axis acceleration sensor and two 2-axis tilt sensors. We measured acceleration and tilt angle of body during fall and activities of daily(ADL) living using the fall detection device that is attached on the subjects'. Moving mattress which is actuated by a pneumatic system was used in fall experiments and it could provide forced falls. Sensor data during fall and ADL were sent to computer and filtered with low-pass filter. The developed fall detection device was successful in detecting a fall about 0.1 second before a severe impact to occur and detecting the direction of the fall to provide enough time and information for the fracture preventive device to be activated. The fall detection device was also able to differentiate fall from ADL such as walking, sitting down, standing up, lying down, and running.