• 한국전기전자재료학회논문지
• /
• 제21권3호
• /
• pp.265-271
• /
• 2008

TCP(Tape Carrier Package), COG (Chip On Glass), COF(Chip On Film) are three methods for connecting LDI(LCD Driver IC) with LCD panels. Especially COF is growing its portion of market place because of low cost and fine pitch correspondence. But COF has a problem of the lead broken failure in LCD module process and the usage of customer. During PCB (Printed Circuit Board) bonding process, the mismatch of the coefficient of thermal expansion between PCB and D-IC makes stress-concentration in COF lead, and also D-IC bending process during module assembly process makes the level of stress in COF lead higher. As an affecting factors of lead-broken failure, the effects of SR(Solder Resister) coating on the COF lead, surface roughness and grain size of COF lead, PI(Polyimide) film thickness, lead width and the ACF(Anisotropic Conductive Film) overlap were studied, The optimization of these affecting manufacturing processes and materials were suggested and verified to prevent the lead-broken failure.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.1008-1011
• /
• 2005

It is necessary for the design of lead frame punches in blanking to consider buckling because inner lead pitch of lead frame has been narrowed by miniaturization and high accumulation of semiconductor. In addition, if process variables change in press stamping process, the lift of punches is no longer influenced in wear and punches can be broken suddenly. To prevent the fracture of fine pitch lead frame punches, having considered applying reinforcement to it, this paper verified the design with buckling analysis. This study presents the optimal position and number of reinforcement to be attached to punches. Finally this study presents design rules of attaching reinforcement.

• 한국정밀공학회지
• /
• 제16권3호통권96호
• /
• pp.25-29
• /
• 1999

The lead frame manufactured by press stamping process, is an important part of semiconductor. The recent technical trend of semiconductor, chip sized and high performance package technology, requires the lead frame to be of more multi-leads and of fine ILP (Inner Lead Pitch). As the ILP is getting finer, its corresponding punch of the stamping die is getting narrower. The punch narrower than its stamping limit has been broken due to local buckling. This paper analyzed the phenomena of punch breakdown. Moreover, the punch design was modified to increase the critical limit of buckling force. This paper, also, suggested new design rules of the punch, which asks the modification of its lead frame design that has to be considered in the stage of semiconductor package design. The new design rules of lead frame design yields a good reliability of semiconductor package as well as a good quality of lead frame.

• 한국정밀공학회지
• /
• 제23권9호
• /
• pp.68-75
• /
• 2006

The lead frame manufactured by stamping process plays an important role in connecting semiconductor to PCB board. As a result of the miniaturization of semiconductor, its corresponding lead frame punch has been narrow. In case of the punch with high slenderness ratio such as lead frame punch, the punch can be broken suddenly due to buckling. To prevent the fracture of lead frame punch, some manufacturers have experientially attached stiffeners to weak parts of punch. The purpose of this study, therefore, is to suggest the guideline far design of stiffened punch. The optimal position and the number of stiffeners to be attached to punch are investigated by elastic buckling analysis. The elastic buckling analysis consists of the eigenvalue buckling analysis and nonlinear buckling analysis. The critical buckling load of elastic buckling analysis is compared with that of buckling test. Finally, the guideline far attaching stiffeners is suggested through analysis of cross section of lead frame punch such as moment of inertia and eccentricity.

• 재활복지
• /
• 제17권4호
• /
• pp.291-309
• /
• 2013

웹 사용성(Web Usability)은 장애에 관계없이 누구나 웹을 원활히 사용할 수 있도록 생성하고 운영하는 기준으로 활용된다. 링크 유효성은 웹 사용성을 결정짓는 주요한 검사항목이다. 웹 사이트에서는 시간이 지남에 따라 링크의 타겟이 없어지거나 변경되는 현상이 발생하고 이로써 링크 유효성이 점차 저하된다. 본 논문에서는 국내 공공기관 웹 사이트의 링크 유효성을 분석하였다. 링크 유효성 자동화 도구에 의한 콘텐츠 접근이 가능한 49개 웹 사이트 중 91.8%의 웹 사이트가 한 개 이상의 끊어진 링크를 포함하고 있었다. 또한 웹 사이트별로 끊어진 링크 수의 평균은 50.5개로 전체 링크 수의 0.33% 수준이었다. 29개 웹 사이트는 내부 링크의 끊김 현상이 있었다. 22개 웹 사이트에서는 끊어진 링크에 대한 안내페이지조차 제공하지 않고 있었다. 끊어진 링크는 웹 사용성을 저하시킴으로써 웹 사이트에 대한 사용자의 신뢰도를 하락시킬 뿐만 아니라 검색엔진을 통한 정보 제공을 차단한다. 따라서 웹 사이트 제작자나 운영자는 링크 유효성의 중요성을 인식하고 링크 유효성 검사를 웹 사이트 운영 절차에 추가하거나 주기적으로 실시하여 링크 끊김으로 인한 사용성 저하를 방지할 필요가 있다.

• 한국안전학회지
• /
• 제28권4호
• /
• pp.1-7
• /
• 2013

Train accidents can be directly connected to fatal accidents-collision, derailment, Fire, railway crossing accidents-resulting in tremendous human casualties. First of all, the railway derailment is not only related to most of railway accidents but also it can lead to much more catastrophic accompanying train overtured than other factors. Therefore, it is most important factor to ensure railway safety. some foreign countries have applied to the detector machines(e.g., ultrasonic detector car, sleep mode, current detector, optical sensing, optical fiber). Since it was developed in order to prevent train from being derailed. In korea, the existing track method has been used to monitor rail condition using track circuit. However, we found out it impossible for Communication Based Train Control system(CBTC), recent technology to detect rail condition using balise(data transmission devices) without no track circuit. For this reason, it is needed instantly to develop real-time monitoring system used to detect broken rails. Firstly, this paper presents domestic and international statues analysis of rail breaks technology. Secondly, the composition and the characteristics of the real-time monitoring system. Finally, the evidence that this system could assumed the location and type of broken rails was proved by the experiment of prototype and operation line tests. We concluded that this system can detect rail break section in which error span exist within${\pm}1m$.

• 한국정보시스템학회지:정보시스템연구
• /
• 제17권4호
• /
• pp.301-319
• /
• 2008

The display market has been replaced by the FPD (Flat Panel Display) from the CRT (Cathode-Ray Tube) since the late 1990s. In the FPD production line, the most equipment has high price. Thus, when the equipment has multi-function, the repetitive process is arranged for the equipment. However, such disposition of equipment results in more complicated process flow owing to repetitive operations. This reduces the production capacity and increases lead-time in turn. In this paper, we develop an AutoMod simulation system that derives to information about the quantity, production lead-time, utilities of facilities, and occupation rates of racks. In this simulation system, we consider the situation where the equipment might be broken and suspended randomly. For the developed system, we first evaluate a production plan with current layout and then, propose a revised alternative plan. Using the same simulation scheme, we investigate comparing the production quantity and lead-time with the two plans. In addition, for a proposed alternative, we try to forecast the most adequate rule between the two job dispatching rules which are FOR (Fewest Operation Remaining) and FCFS (First Come First Serve) through simulation.

• 한국안전학회지
• /
• 제19권4호
• /
• pp.14-19
• /
• 2004

Boiler is a hazardous equipment to have potential explosion ail the time. And not only it has malfunction at explosion. it lead to people death but also secondary accident such as explosion and fire. Therefore, this equipment should not be broken for keeping its own function. And also, high level of safety should be kept in the process of the use not to be malfunctioned. A large scale of accident due to boiler explosion can be preventive in advance. Boiler fracture is occurred by instant expansion (approximately 1700 time) from quick evaporation of rater in boiler, due to pressure decrease in boiler Emitting energy from it is tremendous and it is so dangerous because of its high temperature. Secondary explosion such as fire is also a main hazard occurring at fuel supply place. If any devices with high pressure is broken, then not only boiler vessel but also components of it are spread with high speed, causing secondary accident. This study is to analyze integrally accident cause of fire and flue tube boiler to have occurred pressure fracture actually, to show countermeasures to prevent accident loss from the fire and flue tube boiler.

• 대한임상독성학회지
• /
• 제12권1호
• /
• pp.22-30
• /
• 2014

Purpose: The purpose of this systematic review was to evaluate the evidence regarding injury and poisoning associated with the clinical mercury thermometer. Methods: Electronic literature searches were conducted for identification of relevant studies and case reports of injury and poisoning associated with the clinical mercury thermometer. The search outcomes were limited to literature with English and Korean languages published from 1966. Studies related to occupational mercury exposure, or mercury exposure from sphygmomanometer, barometer, and fluorescent light were excluded. Results: A total of 60 reports, including 59 case reports, were finally included. Of those, nine cases pertained to an intact thermometer as a foreign body, 25 injuries were related to a thermometer, and 26 cases involved exposures to mercury from a broken thermometer. Case reports were classified according to severity into 16 mild, 41 moderate, and two severe cases. Two cases of mortality were reported, one was deliberate intravenous injection of mercury and the other was acute vapor inhalation of mercury from broken thermometers. Conclusion: Findings of this systematic review suggested that the mercury thermometer could cause various forms of poisoning and injury. In particular, inhalation of mercury vapor from a broken thermometer can lead to systemic toxicity requiring chelating therapy.

• 한국전기전자재료학회논문지
• /
• 제18권8호
• /
• pp.696-701
• /
• 2005

This paper was investigated the changes of surface properties of high-temperature-vulcanized (HTV) semiconductive silicone rubber due to oxygen plasma discharge. The modifications produced on the silicone rubber surface by oxygen plasma were accessed using Fourier transform infrared spectroscopy(FTIR), X-ray photoelectron spectroscopy(XPS), contact angle and Surface Roughness Tester. The results of the chemical analysis Showed that C-H bonds were broken due to plasma discharge and Silica-like bonds (SiOx, x=$3\~4$) increased. It is thought that the above changes lead to the increase of surface energy of high-temperature-vulcanized (HTV) semiconductive silicone rubber also, Surface roughness was increased with cleavage of side-chains and oxidation process, it confirmed change as the SEM. The micromorphology of surface and hydrophobicity due to plasma discharge based on our results were discussed.