• Smart Structures and Systems
• /
• v.6 no.5_6
• /
• pp.675-687
• /
• 2010

Structural Health Monitoring (SHM) is the science and technology of monitoring and assessing the condition of aerospace, civil and mechanical infrastructures using a sensing system integrated into the structure. Impedance-based SHM measures impedance of a structure using a PZT (Lead Zirconate Titanate) patch. This paper presents a low-power wireless autonomous and active SHM node called Autonomous SHM Sensor 2 (ASN-2), which is based on the impedance method. In this study, we incorporated three methods to save power. First, entire data processing is performed on-board, which minimizes radio transmission time. Considering that the radio of a wireless sensor node consumes the highest power among all modules, reduction of the transmission time saves substantial power. Second, a rectangular pulse train is used to excite a PZT patch instead of a sinusoidal wave. This eliminates a digital-to-analog converter and reduces the memory space. Third, ASN-2 senses the phase of the response signal instead of the magnitude. Sensing the phase of the signal eliminates an analog-to-digital converter and Fast Fourier Transform operation, which not only saves power, but also enables us to use a low-end low-power processor. Our SHM sensor node ASN-2 is implemented using a TI MSP430 microcontroller evaluation board. A cluster of ASN-2 nodes forms a wireless network. Each node wakes up at a predetermined interval, such as once in four hours, performs an SHM operation, reports the result to the central node wirelessly, and returns to sleep. The power consumption of our ASN-2 is 0.15 mW during the inactive mode and 18 mW during the active mode. Each SHM operation takes about 13 seconds to consume 236 mJ. When our ASN-2 operates once in every four hours, it is estimated to run for about 2.5 years with two AAA-size batteries ignoring the internal battery leakage.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.6
• /
• pp.48-60
• /
• 2011

Nowadays, the 3D community is actively researching on 3D imaging and free-viewpoint video (FVV). The free-viewpoint rendering in multi-view video, virtually move through the scenes in order to create different viewpoints, has become a popular topic in 3D research that can lead to various applications. However, there are restrictions of cost-effectiveness and occupying large bandwidth in video transmission. An alternative to solve this problem is to generate virtual views using a single texture image and a corresponding depth image. A critical issue on generating virtual views is that the regions occluded by the foreground (FG) objects in the original views may become visible in the synthesized views. Filling this disocclusions (holes) in a visually plausible manner determines the quality of synthesis results. In this paper, a new approach for handling disocclusions using depth based inpainting algorithm in synthesized views is presented. Patch based non-parametric texture synthesis which shows excellent performance has two critical elements: determining where to fill first and determining what patch to be copied. In this work, a noise-robust filling priority using the structure tensor of Hessian matrix is proposed. Moreover, a patch matching algorithm excluding foreground region using depth map and considering epipolar line is proposed. Superiority of the proposed method over the existing methods is proved by comparing the experimental results.

• Journal of Chest Surgery
• /
• v.20 no.2
• /
• pp.404-410
• /
• 1987

An 18-day-old male neonate with hypoplastic left heart syndrome underwent surgical intervention by modification of the Norwood procedure on September 23, 1986. Hypoplastic left heart syndrome is a serious congenital cardiac anomaly that has a fatal outlook if left untreated. Included in this anomaly are [1] aortic valve atresia, and hypoplasia of the ascending aorta and aortic arch, [1] mitral valve atresia or hypoplasia, and [3] diminutive or absent left ventricle. Patent ductus arteriosus is essential for any survival, and there is usually a patent foramen ovale. Coarctation of the aorta is frequently associated with the lesion.z With a limited period of cardiopulmonary bypass, deep hypothermia, and circulatory arrest, the ductus arteriosus was excised. The main pulmonary artery was divided immediately below its branches, and the distal stump of the divided pulmonary artery was closed with a pericardial patch. The aortic arch was incised, and a 1 5mm tubular Dacron prosthesis was inserted between the main pulmonary artery and the aortic arch. A 4mm shunt of polytetrafluoroethylene graft was established between the new ascending aorta and the right pulmonary artery to provide controlled pulmonary blood flow. Following rewarming, the heart started to beat regularly, but the patient could not be weaned from cardiopulmonary bypass. At autopsy, the patient was found to have hypoplasia of the aortic tract complex with mitral atresia and aortic atresia. A secundum atrial septal defect was noted. Right atrial and ventricular hypertrophy was present, and the left ventricle was entirely absent. Although unsuccessful in this case report, continuing experience with hypoplastic left heart syndrome will lead to an improvement in result.

• Journal of Korean Neurosurgical Society
• /
• v.59 no.1
• /
• pp.69-74
• /
• 2016

Chronic subdural hematoma (SDH) is a well-known disease entity and is traditionally managed with surgery. However, when associated with spontaneous intracranial hypotension (SIH), the treatment strategy ought to be modified, as classical treatment could lead to unwanted consequences. A 59-year-old man presented with a case of SIH that manifested as a bilateral chronic SDH. He developed fatal extensive pneumocephalus and SDH re-accumulation as a complication of burr-hole drainage. Despite application of an epidural blood patch, the spinal cerebrospinal fluid leak continued, which required open spinal surgery. Chronic SDH management should not be overlooked, especially if the exact cause has not been determined. When chronic SDH assumed to be associated with SIH, the neurosurgeon should determine the exact cause of SIH in order to effectively correct the cause.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.2
• /
• pp.80-91
• /
• 1995

A theoretical models has been prepared which describes the noise generated by tire/road interaction for the tire structure-borne sound analysis. The model begin with a set of thin shell equations describing the motion of the belt of a radial ply tire, as drived by Bohm('mechanisms of the belted tire', Igeniur-Archiv, XXXV, 1966). Structural quantities required for these equations are derived from material properties of the tire. The rolling shape of a tire is computed from the steady-state limit of these equations. Vibrational response of the tire is treated by the full dependent shell equations. The force input at the tire/road interface is calculated on the basis of tread geometry and distribution of contact patch pressure. Radiation of noise is calculated by a simpson integral. Using the programs, the effect on noise of various tire design variations is computed and discussed. Trends which lead to quiet tire design are identified.

• Journal of Chest Surgery
• /
• v.22 no.2
• /
• pp.234-245
• /
• 1989

Between January 1984 and December 1986, sixty nine patients, aged 16 months to 25 years [mean age 10.05*6.40 years], underwent total correction of tetralogy of Fallot in Kyungpook national university hospital. In 66 hospital survivors, 30 patients were followed up for 12 to 48 months [mean 30.10*10.26 months]. These 30 patients were classified in two groups, TAP [transannular patch] and Non-TAP group. There were 9 patients in TAP group, and 21 in Non-TAP group. There were no significant differences between two groups in terms of age at operation, follow up duration, ACC time, and bypass time. All patients were evaluated by two dimensional echocardiography, Doppler echocardiography, standard 12-lead electrocardiography, and plain chest X-ray. Right ventricular systolic pressure, pulmonary arterial systolic pressure, pressure gradient between the right ventricle and the pulmonary artery, presence or absence of pulmonary regurgitation and its grading, fractional shortening of the left ventricle, and Qp/Qs in case of remnant ventricular septal defect were obtained by echocardiographic examination. Cardiothoracic ratio was measured by plain chest film, and ventricular dysrrhythmia was detected by electrocardiogram. Comparing the data between two groups, there was significant difference in incidence of postoperative pulmonary regurgitation [p< 0.05], 100%[9/9] in TAP group and 47.6 %[10/21] in Non-TAP group, but all the regurgitations were not severe. There were no significant differences in other comparisons, despite of higher incidence of cardiomegaly in TAP group [CT ratio: 59.3*5.3% VS 54.7*6, 4 %].

• Structural Engineering and Mechanics
• /
• v.63 no.5
• /
• pp.575-583
• /
• 2017

The study covers the behavior of reinforced concrete deep beams loaded under 4-point bending, failed by shear and repaired using bonding glass fiber reinforced plastics fabrics (GFRP) patches. Two rehabilitation methods have been used to highlight the influence of the composite on the ultimate strength of the beams and their failure modes. In the first series of trials the work has been focused on the reinforcement/rehabilitation of the beam by following the continuous configuration of the FRP fabric. The patch with a U-shape did not provide satisfactory results because this reinforcement strategy does not allow to increase the ultimate strength or to avoid the abrupt shear failure mode. A second methodology of rehabilitation/reinforcement has been developed in the form of SCR (Strips of Critical Region), in which the composite materials reinforcements are positioned to band the inclined cracks (shear) caused by the shear force. The results obtained by using this method lead a superior out come in terms of ultimate strength and change of the failure mode from abrupt shearing to ductile bending.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.235-243
• /
• 2002

Ni-base superalloys are used extensively in industry, both in aeroengines and land based turbines. About 60% by weight of most modern gas turbine engine structural components are made of Ni-base superalloys. To satisfy practical demands, the efficiency of gas turbine engines has been steadily and systematically increased by design modifications to handle higher turbine inlet or firing temperatures. However, the increase in operating temperatures has lead to a decrease in the life of components and increase in costs of replacement. Moreover, around 80% of the large frame size industrial/utility gas turbines operating in the world today were installed in the mid-sixties to early seventies and are now 25 to 30 years old. Consequently, there are greater opportunities now to repair and refurbish the older models. Basically, there are two major factors influencing the weldability of the cast alloys: strain-age cracking and liquation cracking. Susceptibility to strain-age cracking is due to the total Ti plus AI content of the alloy; Liquation cracking is due either to the presence of low melting constituents or constitutional liquation of constituents. Though Rene 41 superalloy has 4.5wt.% total Ti and Al content and falls just below the safe limit proposed by Prager et al., controlled grain size and special heat treatments are needed to obtain crack-free welds. Varying heat treatments and filler materials were used in a laboratory study, then the actual welding of service parts was carried out to verity the possibility of crack-tree weld of components fabricated from Rene 41 superalloy. The microstructural observations indicated that there were two kinds of carbides in the FCC matrix. MC carbides were located along the grain boundaries, while M$_{23}$C$_{6}$ carbide was located both inter and intra granularly. Two kinds of filler materials, Rene 41 and Hastelloy X were used to gas tungsten arc weld a patch into the sheet metal, along with varying pre-weld heat treatments. The microstructure, hardness and tensile tests were determined. The service distressed parts were categorized into three classes: with large cracks, with medium cracks and with small or no visible cracks. No significant difference in microstructure among the specimens was observed. Specimens were cut from the corner and the straight edge of the patch repair, away from the corner. The only cracks present were found to be associated with inadequate surface preparation to remove oxidation. Guidelines for oxide removal and the welding procedures developed in the research enabled crack-free welds to be produced.d.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.6
• /
• pp.1140-1148
• /
• 2017

For the purpose of developing new immunomodulatory agents from broccoli, ethanol extract (BCEE), hot water extract (BCHW), and crude polysaccharide (BCCP) were isolated from broccoli, and their immunomodulatory activities and chemical properties were examined. In the in vitro cytotoxicity analysis, BCHW and BCCP did not affect the growth of tumor cells and normal cells. Murine peritoneal macrophages stimulated with BCCP showed higher production of IL-6, IL-12, and $TNF-{\alpha}$ cytokines than those stimulated with BCHW. Also, BCHW and BCCP did not show proliferation of splenic lymphocytes. In the in vitro assay for intestinal immunomodulatory activities, only BCCP enhanced GM-CSF secretion and the bone marrow cell-proliferating activity via cells in Peyer's patches at $1,000{\mu}g/mL$. Also, BCHW mainly contained 33.7% neutral sugars, such as arabinose, glucose, and galactose, and 30.7% uronic acid, and BCCP consisted of 42.6% neutral sugars, including arabinose, galactose, and glucose, and 50.5% uronic acid. The above results lead us to conclude that crude polysaccharide (BCCP) isolated from broccoli causes considerably high cytokine production in peritoneal macrophages and bone marrow cell proliferation, and the polysaccharide extraction process is indispensable for separation of new immunomodulatory agents from broccoli.

• The Korean Journal of Physiology and Pharmacology
• /
• v.3 no.6
• /
• pp.623-630
• /
• 1999

Decreased cardiac contractility occurs in endotoxicosis, but little is known about the ionic mechanism responsible for myocardial dysfunction. In this study, we examined the changes in $Ca{2+}$ and $K^+$ currents in cardiac myocytes from endotoxin-treated rat. Ventricular myocytes were isolated from normal and endotoxemic rats (ex vivo), that were treated for 10 hours with Salmonella enteritidis lipopolysaccharides (LPS; 1.5 mg/kg) intravenously. Normal cardiac myocytes were also incubated for 6 hours with 200 ng/ml LPS (in vitro). L-type $Ca{2+}$ current $(I_{Ca,L})$ and transient outward $K^+$ current $(I_{to})$ were measured using whole cell patch clamp techniques. Peak $I_{Ca,L}$ was reduced in endotoxemic myocytes (ex vivo; 6.00.4 pA/pF, P＜0.01) compared to normal myocytes (control; 10.90.6 pA/pF). Exposure to endotoxin in vitro also attenuated $I_{Ca,L}$ (8.40.4 pA/pF, P＜0.01). The amplitude of $(I_{to})$ on depolarization to 60 mV was reduced in endotoxin treated myocytes (16.51.5 pA/pF, P＜0.01, ex vivo; 20.00.9 pA/pF, P＜0.01 , in vitro) compared to normal myocytes (control; 24.71.0 pA/pF). There was no voltage shift in steady-state inactivation of $I_{Ca,L}$ and $(I_{to})$ between groups. These results suggest that endotoxin reduces $Ca{2+}$ and $K^+$ currents of rat cardiac myocytes, which may lead to cardiac dysfunction.