Browse > Article
http://dx.doi.org/10.12989/sem.2017.63.5.575

Behavior of pre-cracked deep beams with composite materials repairs  

Boumaaza, M. (Department of Civil Engineering, Laboratory of Civil Engineering & Hydraulics, University of Guelma)
Bezazi, A. (Department of Mechanical Engineering, Laboratory of Applied Mechanics of New Materials, University of Guelma)
Bouchelaghem, H. (Department of Mechanical Engineering, Laboratory of Applied Mechanics of New Materials, University of Guelma)
Benzennache, N. (Department of Civil Engineering, Laboratory of Civil Engineering & Hydraulics, University of Guelma)
Amziane, S. (Department of Civil Engineering, Polytech Clermont Ferrand, Blaise Pascal University)
Scarpa, F. (Bristol Composites Institute (ACCIS), University of Bristol)
Publication Information
Structural Engineering and Mechanics / v.63, no.5, 2017 , pp. 575-583 More about this Journal
Abstract
The study covers the behavior of reinforced concrete deep beams loaded under 4-point bending, failed by shear and repaired using bonding glass fiber reinforced plastics fabrics (GFRP) patches. Two rehabilitation methods have been used to highlight the influence of the composite on the ultimate strength of the beams and their failure modes. In the first series of trials the work has been focused on the reinforcement/rehabilitation of the beam by following the continuous configuration of the FRP fabric. The patch with a U-shape did not provide satisfactory results because this reinforcement strategy does not allow to increase the ultimate strength or to avoid the abrupt shear failure mode. A second methodology of rehabilitation/reinforcement has been developed in the form of SCR (Strips of Critical Region), in which the composite materials reinforcements are positioned to band the inclined cracks (shear) caused by the shear force. The results obtained by using this method lead a superior out come in terms of ultimate strength and change of the failure mode from abrupt shearing to ductile bending.
Keywords
glass fiber; shear reinforcement; reinforced concrete; beams; repair; failure modes; cracking;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Chajes, M.J., Januszka, T.F., Mertz, R., Thomson, T.A. and Finch, W.W. (1995), "Shear strengthening of reinforced concrete beams using externally applied composite fabrics", ACI Struct. J., 295-302.
2 Chajes. M/J., Thomson. T.A., Januszka. T/F. and Finch. Jr. (1994), "Flexural strengthening of concrete beams using externally bonded composite materials", Constr. Build. Mater., 8(3), 191-201.   DOI
3 Chen, J.T. and Teng, J.G. (2001) "A shear strength model for FRP-strengthened RC beams", Proceedings of FRPRCS-5, Cambridge, UK, 97-106.
4 De Lorenzis, L. and Teng, J.G. (2007), "Near-surface mounted FRP reinforcement: An emerging technique for strengthening structures", Compos. Part B, 38, 119-143.   DOI
5 Dong, J., Wang, Q. and Guan, Z. (2013), "Structural behaviour of RC beams with external flexural and flexural-shear strengthening by FRP sheets", Compos. Part B, 44(1), 604-612.   DOI
6 El-Sayed, A.K. (2014), "Effect of longitudinal CFRP strengthening on the shear resistance of reinforced concrete beams", Compos. Part B, 58, 422-429.   DOI
7 Eurocode 2 (1992), Design of concrete structures-Part 1-1: General rules and rules for buildings, ENV 1992 1-1
8 FIB bulletin 14 (2001), Externally bonded reinforcement for RC structures- technicals report design and externally bonded fibre reinforced polymer reinforcement (FRP EBR) for reinforcement concrete structures.
9 Hamrat, M., Boulekbache, B., Chemrouk, M. and Amziane, S. (2012), "Effects of the transverse reinforcement on the shear behaviour of high strength concrete beams", Adv. Struct. Eng., 15(8), 1291-1306.   DOI
10 Li, A., Diagana, C. and Delmas, Y. (2001), "CRFP contribution to shear capacity of strengthened RC beams", Eng. Struct., 23(3) 1212-1220.
11 Manos, G.C., Theofanous, M. and Katakalos, K. (2014), "Numerical simulation of the shear behaviour of reinforced concrete rectangular beam specimens with or without FRPstrip shear reinforcement", Adv. Eng. Softw., 67, 47-56.   DOI
12 Mofidi, A. and Chaallal, O. (2011), "Shear strengthening of RC beams with EB FRP: influencing factors and conceptual debonding model", Compos. Construct., 15, 62-74.   DOI
13 Mofidi, A. and Chaallal, O. (2014), "Tests and design provisions for reinforced-concrete beams strengthened in shear using FRP sheets and strips", Int. J. Concrete Struct. Mater., 8(2), 117-128.   DOI
14 Mofidi, A. and Chaallal, O. (2014), "Tests and design provisions for reinforced-concrete beams strengthened in shear using FRP sheets and strips", Concrete Struct. Mater., 8(2), 117-128.   DOI
15 Panigrahi, A.K., Biswal, K.C. and Barik, M.R. (2014), "Strengthening of shear deficient RC T-beams with externally bonded GFRP sheets", Constr. Build. Mater., 57, 81-91.   DOI
16 Rizzo, A. and De Lorenzis, L. (2009), "Behavior and capacity of RC beams strengthened in shear with NSM FRP reinforcement", Constr. Build. Mater., 23(4), 1555-1567.   DOI
17 Taljstena, B. and Elfgrena, L. (2000), "Strengthening concrete beams for shear using CFRP-materials: evaluation of different application methods", Compos. Part B, 31, 87-96.
18 Sen, T. and Reddy, H.J. (2014), "Efficacy of bio derived jute FRP composite based technique for shear strength retrofitting of reinforced concrete beams and its comparative analysis with carbon and glass FRP shear retrofitting schemes", Sustain. Citi. Soc., 13, 105-124.   DOI
19 Kreit, A. (2012), "Prolongation de la duree de vie des ouvrages en beton arme", INSA Departement Genie Civil, Toulouse, France.
20 Sundarraja, M.C. and Ganesh Prabhu, G. (2011), "Finite element modelling of CFRP jacketed CFST members. under flexural loading", Thin Wall. Struct., 49, 1483-1491.   DOI
21 Tetta, Z.C., Koutas, L.N. and Bournas, D.A. (2015), "Textilereinforced mortar (TRM) versus fiber-reinforced polymers (FRP) in shear strengthening of concrete beams", Compos. Part B, 77, 338-348.   DOI
22 Thomas, J. and Ramadass, S. (2015), "Design for shear strength of concrete beams longitudinally reinforced with GFRP bars", Struct. Eng. Mech., 53(1), 41-55.   DOI
23 Barros, J.A.O. and Dias, S.J.E., (2006), "Near surface mounted CFRP laminates for shear strengthening of concrete beams", Cement Concrete Compos., 28(3), 276-292.   DOI
24 Attari, N., Amziane, S. and Chemrouk, M. (2012), "Flexural strengthening of concrete beams using CFRP, GFRP and hybrid FRP sheets", Constr. Build. Mater., 37, 746-757.   DOI
25 ACI 440.2R-02 (2002), Guide for design and construction of externally bonded FRP systems for strengthening concrete structure.
26 American Society for testing and Materials (2004), Annual book of ASTM standards, ASTM Publications, Danvers, USA.
27 BAEL (1992), Regles techniques de conception et de calcul des ouvrages et constructions en beton arme suivant la methode des etats limites, Mars 1992.
28 Baggio, D., Soudki, K. and Noel, M. (2014), "Strengthening of shear critical RC beams with various FRP systems", Constr. Build. Mater., 66, 634-644.   DOI
29 Bouchelaghem, H., Bezazi, A. and Scarpa, F. (2011a), "Compressive behaviour of concrete cylindrical FRP-confined columns subjected to a new sequential loading technique", Compos. Part B, 42(7), 1987-1993.   DOI
30 Bouchelaghem, H., Bezazi, A. and Scarpa, F. (2011b), "Strength of concrete columns externally wrapped with composites under compressive static loading", J. Reinf. Plast. Compos., 30(19), 1671-1688.   DOI
31 Bousselham, A. and Challal, O. (2006), "Effect of transverse steel and shear span on the performance of RC beams strengthened in shear with CFRP", Compos. Part B: Eng., 37, 37-46.   DOI
32 Breveglieri, M., Aprile, A. and Barros, J.A.O. (2014), "Shear strengthening of reinforced concrete beams strengthened using embedded through section steel bars", Eng. Struct., 81, 76-87.   DOI
33 Chaallal, O., Shahawy, M. and Hassan, M. (2002), "Performance of reinforced concrete Tgirders strengthened in shear with CFRP fabrics", ACI Struct., 99, 335-343.