• 대한방사선기술학회지:방사선기술과학
• /
• 제26권1호
• /
• pp.45-50
• /
• 2003

투시 조영 촬영시 사용되는 방호복의 차폐효율 증가와 경량화는 오랜 시간 연구 대상이 되었다. 이러한 방호복의 질적 향상을 위하여 연구한 결과는 다음과 같다. Apron의 규격인 납당량 0.25 mm에 해당하는 투과선량률은 5.2%로 나타났으며, 시료 Sn, Ni, Ti, Cu의 방사선 차폐 효율은 Sn이 가장 놓게 나타났다. 증착시료 Sn + Pb와 Pb + Sn는 각각 Sn 0.18 mm와 Pb 0.1 mm, Pb 0.1 mm와 Sn 0.36 mm에서 apron의 규격인 납 0.25 mm 두께로 나타났다. 증착시료 Sn+Pb는 Apron의 규격인 0.25 mm 두께보다 차폐효율이 높고, 면적당 무게가 가벼워 방호복 물질로 적합한 적으로 사료된다.

• Bulletin of the Korean Chemical Society
• /
• 제21권1호
• /
• pp.56-60
• /
• 2000

The mechanism of a matrix modification for the trace determination of volatile lead and bismuth by an electro-thermal atomic absorption spectrophotometry was studied by a X-ray diffractometry (XRD). For the investigation of structures, the ash products of the elements were produced by using a palladium as a matrix modifier with or without aluminum or nickel as an auxiliary modifier. The same charring conditions as in the analysis of samples were applied together with much concentrated solution of analytical elements and modifiers in a graphite furnace to get a large amount of the product for XRD. The XRD patterns showed PbPd3 for lead and BiPd3 for bismuth. These mean that the reaction procedures through the charring and atomization were changed from $Pb^{2+}$ ${\rightarrow}$ PbO ${\rightarrow}$$Pb^0$ to $Pb^{2+}$ ${\rightarrow}$ PbO ${\rightarrow}PbPd_3$ ${\rightarrow}$ Pb o for lead and from $Bi^{3+}$ ${\rightarrow}$ BiO ${\rightarrow}$ Bi o to $Bi^{3+}$ ${\rightarrow}$ BiO ${\rightarrow}$ $BiPd_3$ ${\rightarrow}$ $Bi^0$ for bismuth by the addition of modifiers. The volatile elements were stabilized by the formation of palladium alloys through a charring process. Charring temperatures were raised about 500 $^{\circ}C$ by the alloying and the atomization was also stabilized for the enhancement of sensitivities.

• 한국산림과학회지
• /
• 제90권5호
• /
• pp.600-607
• /
• 2001

본 연구는 Pb로 오염된 토양의 phytoextraction을 위해 현사시 (Populus alba ${\times}$ glandulosa)와 박달나무(Betula schmidtii)의 Pb의 흡수능력 및 이에 대한 내성을 조사하였다. 종자로 양묘한 박달나무 및 삽목으로 증식한 현사시 묘목을 화분에 식재 후 Pb를 함유한 수용액으로 관수하였다. 이들 2수종은 $Pb(NO_3)_2$ 농도 800ppm이상의 처리구에서 생장량 감소가 관찰되었다. 대부분의 Pb는 식물체의 뿌리에 축적되었고, 극히 일부분만이 식물체의 지상부위로 이동되었다. 박달나무와 현사시의 Pb의 지상부 전위율은 각각 1.6~2.6%와 1.2~1.6%로 나타났다. 지상부 수체의 최대 Pb 함량은 현사시의 경우 468.0mg/kg, 박달나무는 602.0mg/kg 이었다. Pb에 대한 내성은 박달나무가 현사시에 비해 일반적으로 높은 경향이었으나, 현사시 72-16호 클론은 전체 클론 중에서 가장 높은 내성을 보였다.Biomass 생산과 Pb 흡수능력을 고려하여 이들 두 수종의 phytoextraction을 위한 가능성을 제시하였다.

• 한국토양비료학회지
• /
• 제19권2호
• /
• pp.147-151
• /
• 1986

환경오염물질(環境汚染物質)의 하나인 납(pb)을 배양액중(培養液中)에 농도(濃度)를 달리하고 수도(水稻)에 대(對)한 pot사경시험(砂耕試驗)을 실시(實施)하여 수량(收量), 생육상황(生育狀況) 및 식물체내(植物體內) 납 축적정도(蓄積程度)를 조사(調査)한 결과(結果)는 다음과 같다. 1. 사경액중(砂耕液中) 납 농도(濃度)가 증가(增加)함에 따라 감수(減收)되였다. 2. 유의성(有意性)있는 감수최저농도(減收最低濃度)는 13.6ppm이었다. 3. 납 농도증가(濃度增加)에 따라서 수도체중(水稻體中) 납 함량(含量)은 엽신(葉身) 현미(玄米)에서 유의성(有意性)있는 증가(增加)를 보였고 엽초에선 유의성(有意性)이 없었다. 4. 식물체(植物體) 부위별(部位別) 납 함량(含量)과 감수율(減收率)과의 관계(關係)는 엽신(葉身)에서는 유의성(有意性)있는 증가(增加)를 보였으나 엽초에서는 유의성(有意性)이 없었다.

• 분석과학
• /
• 제20권1호
• /
• pp.41-48
• /
• 2007

유리소재 중의 미량의 납 및 카드뮴을 Na-DDTC를 가하여 Pb- 및 Cd-DDTC 착물을 형성시켜 유리 matrix 원소들로 부터 분리한 다음 MIBK로 추출하여 ICP-AES로 분석하였다. 유리 기질성분인 Na, Si, Mg 그리고 Ca 화합물 등은 미량의 납 및 카드뮴 정량에 방해작용을 하므로 직접 분석할 수 없으므로 용매추출법에 의해 Pb 및 Cd를 효율적으로 분리할 수 있었다. Pb 및 Cd 화합물이 첨가된 시험기준 시료와 NIST SRM 1412에 대한 용매추출실험에서 matrix의 영향을 받지 않고 정량하였다.

• Journal of Welding and Joining
• /
• 제14권3호
• /
• pp.86-92
• /
• 1996

This paper presents the investigations on the initial strength and its variation of Sn-Pb solder joint using different lead frames, such as are 42 alloy lead and Cu alloy lead. As the result of the lack of initial strength at solder joints, whose pitch is from 0.3 to 0.4mm, short circuit often occured at the solder joint by thermal shock or external impact. Therefore, in this paper investigations were performed on the initial strength and its variation of Sn-Pb solder joint as well as fractured mode with using different lead frames.

• 한국응용과학기술학회지
• /
• 제23권4호
• /
• pp.347-354
• /
• 2006

Generally, it has been known that positive plate efficiency is the most influential effect on the initial current capacity of lead acid battery. Thus, in this study, we have investigated the curing effect of the positive plate, which is one of the important lead acid battery processes. The curing process of the positive plate is performed either with the separation of each plate with 1mm gap or with no gap of plate. As a result, when there is no interval between each plate, the higher temperature current happened than expected, resulting in the changes in the initial current efficiency of the lead acid battery. The chemical composition and crystal structure of a material coated on the positive plate were identified with XRD and SEM. It was resulted that were only there not a lot of 4BS (tetrabasic-lead sulfate, $4PbO{\cdot}PbSO_4)$ on the plate in case of curing of plates without interval, but a large quantity of $Pb_3O_4$ also formed on the surface. On the other hand, it was observed that 3BS (tribasic-lead sulface, $3PbO{\cdot}PbSO_4{\cdot}H_2O)$ was the main product on the plate in case of typical curing process with some interval. From the initial current capacity test, the positive plate having 3BS was approximately 40% higher in initial current capacity than that having 4BS. It was concluded that 4BS and $Pb_3O_4$ on the plate surface were harmful to the initial current capacity of lead acid battery.

• Journal of Electrochemical Science and Technology
• /
• 제8권3호
• /
• pp.197-205
• /
• 2017

Lead dioxide thin films were electrodeposited on nickel substrate from acidic lead nitrate solution. Current efficiency and thickness measurements, cyclic voltammetry, AFM, SEM, and X-ray diffraction experiments were conducted on $PbO_2$ surface to elucidate the effect of lead nitrate concentration, current density, temperature on the morphology, chemical behavior, and crystal structure. Experimental results showed that deposition efficiency was affected by the current density and solution concentration. The film thickness was independent of current density when deposition from high $Pb(NO_3)_2$ concentration, while it decreased for low concentration and high current density deposition. On the other hand, deposition temperature had negative effect on current efficiency more for lower current density deposition. Cyclic voltammetric study revealed that comparatively more ${\beta}-PbO_2$ produced compact deposits when deposition was carried out from high $Pb(NO_3)_2$ concentration. Such compact films gave lower charge discharge current density during cycling. SEM and AFM studies showed that deposition of regular-size sharp-edge grains occurred for all deposition conditions. The grain size for high temperature and low concentration $Pb(NO_3)_2$ deposition was bigger than from low temperature and high concentration deposition conditions. While cycling converted all grains into loosely adhered flappy deposit with numerous pores. X-ray diffraction measurement indicates that high concentration, high temperature, and high current density favored ${\beta}-PbO_2$ deposition while ${\alpha}-PbO_2$ converted to ${\beta}-PbO_2$ together with some unconverted $PbSO_4$ during cycling in $H_2SO_4$.

• 한국환경보건학회지
• /
• 제21권1호
• /
• pp.47-55
• /
• 1995

Minari(Oenanthe stolonifera DC.) lived in serious polluted water is able to remove chemical elements from batch system. This study attempted to compare the incorporation of cadmium and lead in batch system. Different concentrations of Cd(0.02 0.1 0.5 1.00 5.00 mg/l) and Pb(0.1 0.5 1.0 5.0 10.0 mg/l) were used. Toxic effects were obvious at Cd 1.00 mg/l and Pb 5.00 mg/l. The detrimental effects on minari were chlorosis of leaves and stunted roots and reduction in the number of lateral roots. There was reduction in growth rates exposed above Cd 1.00 mg/l and lead 5.0 mg/l. The minari capacities to remove Cd were 34.1-74.2% and Pb were 53.0~91.5%. The removal rates by minari in Cd and Pb solution were decreased with increased exposure concentration(in Cd r=0.97, in Pb r=0.88). The removal rates by minari in Cd and Pb solution were increased with increased growth rate(in Cd r=0.93 in Pb r=0.92). Recovery rates on minari are 67.3~95.2% in Cd water and 72.6~88.3% in Pb water. The rates are increased with increased growth rates and decreased initial concentrations.

• 한국결정성장학회지
• /
• 제7권4호
• /
• pp.555-559
• /
• 1997

lead acetate, scandium acetate, niobium isopropoxide를 전구체로 사용한 솔-젤법으로 $Pb(Sc_{1/2}Nb_{1/2})O_3$ 분말을 제조하였다. 젤 분말에 대한 결정화 거동과 상변화가 연구되었다. 솔-젤법을 이용하여 $700^{\circ}C$에서 1시간 동안 열처리를 행하여 97 % 이상의 매우 순수한 $Pb(Sc_{1/2}Nb_{1/2})O_3$ 상을 얻을 수 있었으며 0.2 $\mu \textrm{m}$ 이하의 평균 입자 크기를 가진 매우 미세한 분말의 제조가 가능하다.