• 제목/요약/키워드: Lead(II) Iodide

검색결과 6건 처리시간 0.019초

방사선근접치료 분야의 선량 측정을 위해 제조된 Lead(II) Iodide 선량계의 적용가능성 연구 (The Study on Applicability of Manufactured Lead(II) Iodide Dosimeter for Dose Measurement in Brachytherapy)

  • 양승우;한무재;박성광
    • 한국방사선학회논문지
    • /
    • 제15권6호
    • /
    • pp.789-794
    • /
    • 2021
  • 근접방사선치료는 방사선동위원소를 신체 내부에 넣어 종양에 방사선을 집중적으로 조사하는 치료법이다. 근접방사선 치료는 고선량율의 방사선동위원소 선원을 사용하기 때문에 정확한 선원의 위치 및 선량등을 파악하는 것이 매우 중요하다. 하지만 임상에서는 ruler, autoradiograph등을 통하여 육안으로 부정확하게 평가하는 실정이다. 이에 본 연구에서는 Lead(II) Iodide(PbI2) 물질을 사용하여 방사선근접치료에 사용할 수 있는 선량계를 개발하고, 재현성, 선형성, PID 항목을 분석하여 적용가능성을 평가하였다. 재현성 평가 결과, RSD 값은 1.41%로 평가기준 1.5%를 만족하였다. 선형성 평가결과, R2값은 0.9993으로 평가기준 0.9990을 만족하였다. PID 평가 결과 50% 선량 감약지점에서 거리의 역자승 법칙의 이론값과 비교하여 0.06 cm의 차이만을 나타내었다. 본 실험에서 제작된 선량계는 모든 평가에서 기준치를 만족하는 결과값을 나타내어 방사선근접치료 영역에서의 선량계 적용 가능성이 충분한 것으로 판단된다.

요오드화칼륨 수용액의 양극산화 (제2보) (Anodic Oxidation of Potassium Iodide Solution (II))

  • 남종우;김학준
    • 대한화학회지
    • /
    • 제18권5호
    • /
    • pp.373-380
    • /
    • 1974
  • 저자들에 의해서 이미 보고되어 있는 요오드화염으로부터 요오드산염$(I^-{\to}{IO_3}^-)$ 및 요오드산염으로 부터 과요오드산염$({IO_3}^-{\to}{IO_4}^-)$까지의 전해결과를 참작하여 무격막 전해조와 이산화납양극을 사용하여 요오드화염으로부터 과요오드산염$(I^-{\to}{IO_4}^-)$을 직접 전해제조하기 위한 최적 전해조건에 관하여 검토하였다. 0.5g/l의 환원방지제인 중크롬산칼륨을 함유함 1몰의 요오드화칼륨 수용액을 15A/$dm^2$의 양극전류밀도와 $60^{\circ}C$의 전해온도에서 전해한 결과, 요오드화칼륨으로 부터 과요오드산칼륨까지의 변화율 98%에서 전류효율이 84%이었다. 또한 각종 전해액중에서 이산화납 양극에 의한 분극곡선으로 부터 전극반응의 내용도 설명하였다.

  • PDF

Hot-air 공정을 이용한 무기 CsPbl2Br 페로브스카이트 태양전진 제작 연구 (Study of Inorganic CsPbI2Br Perovskite Solar Cell Using Hot-air Process)

  • 김리나;이동건;강동원;김은도;김제하
    • Current Photovoltaic Research
    • /
    • 제10권4호
    • /
    • pp.101-106
    • /
    • 2022
  • We prepared a CsPbI2Br solution using Cesium iodide (CsI), Lead (II) bromide (PbBr2) and Lead (II) iodide (PbI2) materials into a polar solvent mixture of N,N-dimethylformamide (DMF) and Dimethyl sulfoxide (DMSO). A simple spin coating technique was used for the fabrication of CsPbI2Br absorber layer in the solution process. In order to prepare uniform coating of absorber film we adopted a hot-air process in assocation with the spin coating. It was confirmed that the thin film manufactured by the hot-air process had a higher absorption rate than that without it, and the optical band gap was measured 1.93 eV. The thin film of absorber was uniformly prepared and revealed the Black α-Cubic crystal phase as proved through X-ray diffraction analysis. Finally, a perovskite solar cell having an n-i-p structure was manufactured with a CsPbI2Br perovskite absorption layer. From the solar cell, we obtained a power conversion efficiency (PCE) of 5.97% in a forward measurement.

Phosphor Particle 혼합형 Hybrid 선량계의 방사선치료 Quality Assurance에 대한 적용가능성 평가 (Feasibility Study of Phosphor Particle Blended Hybrid Dosimeter for Quality Assurance in Radiation Therapy)

  • 신요한;한무재;정재훈;조흥래;박성광
    • 한국방사선학회논문지
    • /
    • 제13권3호
    • /
    • pp.333-338
    • /
    • 2019
  • 방사선치료 분야에서는 치료의 안전성을 검증하기 위한 Quality Assurance(QA) 절차가 매우 중요하게 여겨진다. 그러나 일반적으로 이에 사용되는 선량계들의 다양한 문제점 때문에, 이를 대체하기 위한 선량계 연구가 활발히 진행되고 있다. 본 연구에서는 형광체로부터 방출된 visible light(VL)에 의한 Sensitivity 극대화를 위해, 뛰어난 형광 효율을 가지는 형광체인 $Gd_2O_2S:Tb$를 요오드화납(Lead(II) Iodide; $PbI_2$)에 다양한 weight percent(wt%)로 혼합한 Blended hybrid sensor를 제작하였다. 이후 Blended sensor 및 Pure $PbI_2$ sensor의 고에너지 방사선에 대한 반응특성을 비교 및 평가하였다. 민감도 평가결과, 3wt%는 sensor에서 타 sensor들과 40% 이상 차이나는 최댓값이 나타났으며, 이를 제외한 센서에서 wt%의 증가에 따른 점차적 민감도 감소추세를 확인하였다. 또한, 재현성 평가에서는 Pure $PbI_2$ sensor가 coefficient of variation(CV)>0.015의 큰 편차를 보인 반면, blended sensor는 모두 CV<0.015 이하의 결과를 보였다.

Synthesis of a New Hexadendates Schiff's Base and Its Application in the Fabrication of a Highly Selective Mercury(II) Sensor

  • Ganjali, M.R.;Norouzi, P.;Alizadeh, T.;Salavati-Niasari, M.
    • Bulletin of the Korean Chemical Society
    • /
    • 제28권1호
    • /
    • pp.68-72
    • /
    • 2007
  • A new PVC membrane potentiometric sensor that is highly selective to Hg2+ ions was prepared, using bis(2-hydroxybenzophenone) butane-2,3-dihydrazone (HBBD) as an excellent hexadendates neutral carrier. The sensor works satisfactorily in the concentration range of 1.0 × 10-6 to 1.0 × 10-1 mol L-1 (detection limit 4 × 10-7 mol L-1) with a Nernstian slope of 29.7 mV per decade. This electrode showed a fast response time (~8 s) and was used for at least 12 weeks without any divergence. The sensor exhibits good Hg2+ selectivity for a broad range of common alkali, alkaline earth, transition and heavy metal ions (lithium, sodium, potassium, magnesium, calcium, copper, nickel, cobalt, zinc, cadmium, lead and lanthanum). The electrode response is pH independent in the range of 1.5-4.0. Furthermore, the developed sensor was successfully used as an indicator electrode in the potentiometric titration of mercury ions with potassium iodide and the direct determination of mercury in some binary and ternary mixtures.

FLUKA 전산 모사를 통한 감마선원 조건에서의 요오드화납(II)과 Gd2O2S:Tb가 결합된 센서의 적용가능성 연구 (A Study on the Feasibility of Lead(II) Iodide and Gd2O2S:Tb Overlapping Sensors in Gamma Source Conditions using FLUKA Simulation)

  • 양승우;박윤희;박지군;허예지
    • 한국방사선학회논문지
    • /
    • 제16권4호
    • /
    • pp.381-386
    • /
    • 2022
  • 비파괴검사(NDT; Non-Destruction Test)는 제품의 기능을 손상시키거나 물리적으로 파괴시키지 않고 내부의 결함을 검사하는 방법이다. 이러한 방사선투과검사는 고에너지의 방사선을 사용하기 때문에 방사선작업종사자들의 방사선피폭을 방지하는 것은 매우 중요하다. 이에 본 연구는 PbI2에 Gd2O2S:Tb를 결합하여 기존 PbI2보다 방사선 검출성능을 더욱 향상시켜 방사선투과검사에서 선원누출 등의 사고를 즉각적으로 감지할 수 있는 새로운 구조의 방사선 센서를 제시하였다. 평가는 FLUKA 전산 모사를 통하여 감마선원에서 Gd2O2S:Tb 결합 전후의 변환 효율을 분석하였다. Gd2O2S:Tb가 결합된 PbI2는 방사선 검출성능이 1.22배에서 3.22배까지 더 높은 것으로 나타났다. 이러한 결과로부터 본 연구에서 제시된 센서는 방사선투과검사 선원 감지용 방사선 센서로 적용 가능할 것으로 분석되었다.