• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.7
• /
• pp.784-791
• /
• 2013

Recent advanced IT made layout design fast and accurate by using algorithms. Layout design should be determined by considering the position of equipment with satisfying various space constraints and its component works with optimum performance. Especially, engine room layout design is performed with mother ship data, theoretical optimal solution, design requirements and several design constraints in initial design stage. Piping design is affected by position of equipment seriously. Piping design depends on experience of designer. And also piping designer should consider correlation of equipment and efficiency of space. In this study, space evaluation method has been used to evaluate efficiency of space. And also this study suggested object function for optimal piping route, Average Reservation Index(ARI), Estimated Piping Productivity(EPP) and with modified space evaluation method. In this study, optimum pipe routing system has been developed to reflect automated piping route with space efficiency and experience of piping designer. Engine room is applied to the design of the piping in order to confirm validity of the developed system.

• Journal of the Korean Institute of Educational Facilities
• /
• v.19 no.3
• /
• pp.3-12
• /
• 2012

Owing to generalization of design competitions since 1990s, various design methods was tried in elementary middle high school design competitions. Therefore, to analyze design characteristics of elementary middle high school is very meaningful. In this context, this study is the most important purpose for analyzing layout plans and their trends in prizewinners of elementary middle high school design competitions and for furnishing basic datum for next school design. The result of this study is following : (1) The layout patterns of school buildings are classified into 12 types. (2) Entrance design is divided into 6 types(structure, column and wall, open, half structure, general, and mixed type). (3) Square design is grouped into 7 types. (4) Pedestrian mall is sorted out 6 types(straight lineal, curve, curve and square, straight lineal and curve, and straight lineal and curve and square type). (5) Entrance types of vehicle and pedestrian are classified into 4 types(parallel, ㅡ separation, ㄱ separation, and opposite separation type) Analysis shows that the best applying for layout patterns of school buildings is ㄷ type and ㅌ type, for entrance design is structure type, for square design is ${\square}$ type and ${\bigcirc}$ type, for pedestrian mall is straight lineal and square type, and for entrance types of vehicle and pedestrian is parallel type.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.2
• /
• pp.471-483
• /
• 2014

Since 2009 of global financial crisis, shipbuilding industry has undergone hard times seriously. After such a long depression, the latest global shipping market index shows that the economic recovery of global shipbuilding market is underway. Especially, nations with enormous resources are going to increase their productivity or expanding their shipyards to accommodate a large amount of orders expected in the near future. However, few commercial projects have been carried out for the practical shipyard layout designs even though those can be good commercial opportunities for shipbuilding engineers. Shipbuilding starts with a shipyard construction with a large scale investment initially. Shipyard design and the equipment layout problem, which is directly linked to the productivity of ship production, is an important issue in the production planning of mass production of ships. In many cases, shipbuilding yard design has relied on the experience of the internal engineer, resulting in sporadic and poorly organized processes. Consequently, economic losses and the trial and error involved in such a design process are inevitable problems. The starting point of shipyard construction is to design a shipyard layout. Four kinds of engineering parts required for the shipyard layout design and construction. Those are civil engineering, building engineering, utility engineering and production layout engineering. Among these parts, production layout engineering is most important because its result is used as a foundation of the other engineering parts, and also, determines the shipyard capacity in the shipyard lifecycle. In this paper, the background of shipbuilding industry is explained in terms of engineering works for the recognition of the macro trend. Nextly, preliminary design methods and related case study is introduced briefly by referencing the previous research. Lastly, the designed work of layout design is validated using the computer simulation technology.

• Journal of Korean Institute of Industrial Engineers
• /
• v.20 no.4
• /
• pp.85-97
• /
• 1994

An interactive and iterative control panel layout method based on the constraint satisfaction problem (CSP) technique was developed to generate an ergonomically sound panel design. This control panel layout method attempts to incorporate a variety of relevant ergonomic principles and design constraints, and generate an optimal or, at least, a "satisfactory" solution through an efficient search algorithm. The problem of seeking an ergonomically sound panel design should be viewed as a multi-criteria design problem and most of the design objectives should be understood as constraints. Hence, a CSP technique was employed in this study for dealing with the multi-constraints layout problem. The efficient search algorithm using "preprocess" and "look_ahead" procedures was developed to handle vast amount of computation. In order to apply the CSP technique to the panel layout procedure, the ergonomic principles such as spatial compatibility, frequency-of-use, importance, functional grouping, and sequence-of-use were formalized as CSP terms. The effectiveness of the proposed panel layout method was evaluated by example problems and the results clearly showed that the generated layouts properly considered various ergonomic design principles.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.6 s.177
• /
• pp.1379-1389
• /
• 2000

In this study, a design process of robotic cell is presented. This paper focuses only on the automation of workpiece handling with robot. The presented design process enables us to analyze effectiv ely the original production system and to redesign it as an optimum production system with robots. An original production system is analyzed with respect to its economical and technological requirements for automation. If automation of the given production system is feasible, the conceptual design for automation is firstly derived. Next, the detail design is derived for the optimum conceptual design. Finally, an optimum system solution is determined after the economical and technical evaluation of all the derived detail designs. The all specifications of each element of the redesigned production system and its layout are determined at the detail design phase. This paper shows a low cost supporting tool for layout design of robotic cell with SCARA type robots.

• Korean Journal of Computational Design and Engineering
• /
• v.22 no.1
• /
• pp.18-27
• /
• 2017

As building space constitution and layout are critical for satisfying the building owner and users, their optimization is so important in the design process. However it's not always simple to set up objective criteria for the space layout optimization for different requirements and the architects mostly depend on their own experience for these. This study is to suggest a way to make up for this issue by referencing and deducing the space layout based on the given BIM space information and existing knowledge. For this purpose, the Space Syntax is applied to extract the information from a space model and an Expert System is used to make the best use of the relevant knowledge. Based on the Integration indexes for all the spaces, we could compare the space layout alternatives and determine the best selection for different accessibility conditions.

• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.143-149
• /
• 2002

There are a lot of differences in the Eastern and Western space culture. Especially, Comparing to Japanese, Koreans are not good at utilizing the small space and react effectively. Therefore, the interior space of public transportation needs to be relatively developed to highly reasonable level in Korea. The purpose of this paper is to propose the concept of Korean tradition in urban transit interior layout, which means vernacular design. The interior layout should be made in terms of the emotional aspect not functional one. In order to study the notion of national character, this study refers the concept of interior layout of the public transportation to the layout of traditional architecture and modern office. The research of vernacular design can provide national character and traditional design and can make a success in a practical use and a visual effect. This study based on the national differences of space will be proposed the outline of interior layout and the shape of interior trims in the public transportation in Korea.

• Journal of the Korean Institute of Navigation
• /
• v.21 no.4
• /
• pp.1-9
• /
• 1997

A study on theergonomic design of the automated ship's bridge and console layout was carried out through this paper. The goal of this study is to find out the effective and ergonomic optimal design solutions of bridge layout hence to reduce the duty officier's workload and increase the safety of navigation. The conventional bridge layouts and modernized Integrated bridge layouts were compared using several factors. To use human factors, an ergonomic control panel layout system based on constraint satisfaction algorithm wa squoted. And the integrated ergonomic bridge layout was converged and applied to the redesign of the navigational console layout.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 1995.11a
• /
• pp.90-91
• /
• 1995

• Journal of the Korean Society of Costume
• /
• v.60 no.1
• /
• pp.117-134
• /
• 2010

The multilateral attempt for present applications of art school of thought and expression is leading modern fashion as a chapter of various artistic expression. In fashion, historic art thinking which predominated the period are source of optional inspiration not simply being generated, culminated and disappear but layout principles which can reemerge as periodical needs. In other words, the past styles are the source of inspiration of new trend of the present time and will serve as the text that give birth to yet another trend. In this study, I conducted the research on the layout principles of Modernism Architecture in aspects of pure visibility and the layout characteristics. And I analyzed cases of modern fashion which were appling architectural layout principles in the view point of formal construction dimension. As the result, the layout principles of Modernism Architecture have the characteristics of diagram linearity, geometric planarity and exclusive closing. And I was applying the architectural layout principles of Modernism to fashion. The layout principles of Modernism Architecture have the tendency of lacking history types, abstract plane partition and reductionism purity in fashion. The meaning of this study is follows: The characteristics of art school of thought are given shape by appling & analysing the architectural layout principles of historical art school of thought to modern fashion in the view point of formal construction dimension. The applied possibility of historical art school of thought as the source of inspiration about the fashion design is extended.