• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1994년도 춘계학술대회논문집
• /
• pp.75-84
• /
• 1994

A control panel layout method based on the constraint satisfaction problem(CSP) technique was developed to generate an ergonomically sound panel design. This control panel layout method attempts to incorporate a variety of relevant ergonomic principles and design constrains, and generate an optimal or, at least, a "satisfactory" solution through the efficient search algorithm. The problem of seeking an ergonomically sound panel design should be viewed as a multiple criteria problem, and most of the design objectives should be understood as constraints. Hence, a CSP technique was employed in this study for dealing with the multi-constraiants layout problem. The efficient search algorithm using "preprocess" and "look ahead" procedures was developed to handle the vast amount of computational effort. In order to apply the CSP technique to the panel layout procedure, the ergonomic principles such as spatial compatibility, frequency-of- use, importance, functional grouping, and sequence-of-use were formalized as CSP terms. The effectiveness of the developed panel layout method was evaluated by example problems, and the results clearly showed that the generated layouts took various ergonomic design principles into account.esign principles into account.

• Smart Structures and Systems
• /
• 제18권3호
• /
• pp.389-403
• /
• 2016

Structural deflection can be identified from measured strains from long gague sensors, but the sensor layout scheme greatly influences on the accuracy of identified resutls. To determine the optimal sensor layout scheme for accurate deflection identification of the tied arch bridge, the method of optimal layout of long-gauge fiber optic sensors is studied, in which the characteristic curve is first developed by using the bending macro-strain curve under multiple target load conditions, then optimal sensor layout scheme with different number of sensors are determined. A tied arch bridge is studied as an example to verify the effectiveness and robustness of the proposed method for static and dynamic deflection identification.

• 대한조선학회논문집
• /
• 제50권1호
• /
• pp.14-24
• /
• 2013

The marine leisure industry in Korea has been the focus of the power of economic growth and the creation of jobs in recent years. In this regard, many studies concerning marine leisure are on-going in various fields. In this paper, developed a layout system and algorithm can resolve the factory and facility layout problem. For a layout design of leisure-boat factories, the leisure-boat production process is analyzed in order to derive standard production space elements for the layout of the factory. Based on the results, a draft design of the factory layout is carried out based on the manpower planning data, as well as the characteristics and relationships of each process data. A layout design of this paper can be verified through a factory simulation solution and we suggest the verification method using a SBD(simulation based design) methodology. The layout system takes into account the user's accessibility and extendibility, so it is web-oriented and uses RIA (rich Internet Application) technology. Furthermore, the system and layout algorithm of this paper are verified with samples data that show the efficient factory arrangement and practical application method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.906-911
• /
• 1992

We deals with stationary layout control system of AGV. It is a intelligent contorl system to be wholly charged control PC a layout information and guided command and to be controlled a vehicle driving, steening, safety of natural functions of AGV. Fieldbus concentrator of stationary layout control system serves control command from control PC and status information of AGV. Telegram software monitors transmitted command and status information through IR (Infrared) modem. Epecially it is possible to easily network to use not an exclusive controller of AGV but

• 대한전자공학회논문지
• /
• 제24권4호
• /
• pp.708-712
• /
• 1987

This paper deals with minimizing layout area of VLSI design. A long wire in a VLSI layout causes delay which can be reduced by using a driver. There can be significant area increase when many drivers are introduced in a layout. This paper describes a method to obtain tight bound on the worst-case increase in area when drivers are introduced along many long wires in a layout. The area occupied by minimum-area embedding for a circuit can depend on the aspect ratio of the bounding rectangle of the layout. This paper presents a separator-based area optimal embeddings for VLSI graphs in rectangles of several aspect ratios.

• 한국항해항만학회지
• /
• 제29권8호
• /
• pp.741-746
• /
• 2005

본 연구는 시뮬레이션을 활용하여 장치장의 레이아웃을 설계하고 레이아웃의 대안설계를 평가하기 위한 방법을 제안한다. 설계방법론은 장치장 레이아웃을 가진 재래식 컨테이너터미널의 개념들을 기초로 한다. 일반적으로 컨테이너터미널의 장치장 설계는 두가지 부분으로 구성되는데, 하나는 섹션수와 런수간의 장치장 면적을 분리하는 것이고, 다른 하나는 야드트럭과 야드크레인과 같은 장비의 수를 결정하는 것이다. 과거에는 이 설계가 시설물과 장비들을 고려해야 하는 매우 복잡한 문제이기 때문에 재래식 컨테이너터미널의 복제와 운영자의 경험에 의존했다. 본 논문에서는 시뮬레이션 방법이 사용된 개념설계로서 장치장 설계 방법을 제안한다. 장치장 영역에서 섹션과 런의 수, 컨테이너 크레인당 야드트럭의 수, 런딩 야드 크레인의 수 등이 시뮬레이션을 사용하여 결정된다. 추가로 장치장 레이아웃에서 블록간의 통행량 흐름이 비율별로 추정된다.

• 대한산업공학회지
• /
• 제20권4호
• /
• pp.85-97
• /
• 1994

An interactive and iterative control panel layout method based on the constraint satisfaction problem (CSP) technique was developed to generate an ergonomically sound panel design. This control panel layout method attempts to incorporate a variety of relevant ergonomic principles and design constraints, and generate an optimal or, at least, a "satisfactory" solution through an efficient search algorithm. The problem of seeking an ergonomically sound panel design should be viewed as a multi-criteria design problem and most of the design objectives should be understood as constraints. Hence, a CSP technique was employed in this study for dealing with the multi-constraints layout problem. The efficient search algorithm using "preprocess" and "look_ahead" procedures was developed to handle vast amount of computation. In order to apply the CSP technique to the panel layout procedure, the ergonomic principles such as spatial compatibility, frequency-of-use, importance, functional grouping, and sequence-of-use were formalized as CSP terms. The effectiveness of the proposed panel layout method was evaluated by example problems and the results clearly showed that the generated layouts properly considered various ergonomic design principles.

• 한국기계가공학회지
• /
• 제12권3호
• /
• pp.96-101
• /
• 2013

Automotive brake system is an essential element for the safety. The system is powered by the circulation of brake oil. A braker hose is used for the circulation of the oil in this system. Layout of the hose changes according to the steering and stress occur in the hose. A lot of the durability tests are performed in order to prevent serious problems such as hose bursting by the accumulation of the stress before setting an optimized hose layout on automobile. The test is conducted for the layout which is same such as set in automobile. In the test, brake hose layout shall exercise the same mode of thousands of times under the high temperature and periodic pressure condition and then the damage of the tested hose is inspected. This test, however, has a disadvantage of heavy consumption of time and money. In order to compensate for these drawbacks, the finite element method(FEM) study was performed to predict the changes in the layout of the brake hose. In this study, the FEM results and the test results were compared and the validity was verified. The radius of curvature of the FEM and test at the same positions were especially investigated for the validation. Also, this study will be used as the basis of research on the life prediction of brake hose.

• Advances in Computational Design
• /
• 제3권1호
• /
• pp.35-47
• /
• 2018

Design of settlement space is a complicated process while reasonable spatial layout bears great significance on the development and resource allocation of a settlement. The study proposes a weighted L-system generation algorithm based on CA (Cellular Automation) model which tags the spatial attributes of cells through changes in their state during the evolution of CA and thus identifies the spatial growth mode of a settlement. The entrance area of the Caidian Botanical and Animal Garden is used a case study for the model. A design method is proposed which starts from the internal logics of spatial generation, explores possibility of spatial rules and realizes the quantitative analysis and dynamic control of the design process. Taking a top-down approach, the design method takes into account the site information, studies the spatial generation mechanism of settlements and further presents a engine for the generation of multiple layout proposals based on different rules. A optimal solution is acquired using GA (Genetic Algorithm) which generates a settlement spatial layout carrying site information and dynamically linked to the surround environment. The study aims to propose a design method to optimize the spatial layout of the complex settlement system based on parametric generation.

• 대한조선학회지
• /
• 제27권3호
• /
• pp.117-126
• /
• 1990

선박설계의 초기단계에서는 여러가지 구획배치 설계안이 생성되고 이에 대한 검토가 반복적으로 수행된다. 이러한 반복작업을 짧은 시간내에 효과적으로 수행할 수 있는 수단이 마련된다면 설계능률 향상에 도움이 될 것이다. 본 논문에서는 computer를 이용하여 구획배치 설계안을 생성하고 설계안을 검토하는 기법에 대하여 기술하였다. 본 기법에서는 구획을 형성하는 요소들의 계층적 구조를 설정하고 각 요소사이의 관계를 명확히 정의하여 구획배치 전산모델을 생성하며 이를 통하여 설계초기단계에서의 설계안 검토작업이 효과적으로 수행될 수 있도록 하였다. 정의된 구획을 저장하는 자료구조에 대하여 설명하였으며 이 기법을 해양조사선의 구획 배치설계 및 기본계산에 적용한 예를 나타내었다.