• 한국전기전자재료학회논문지
• /
• 제21권3호
• /
• pp.213-216
• /
• 2008

The voltages for pixel electrodes on LCD panels are supplied with analog voltages from LCD Driver ICs (LDIs). The latest LDI developed for large LCD TV's has suffered from the degradation of analog output characteristics (target voltage: AVO and output voltage deviation: dVO). By the failure analysis, humps in $I_D-V_G$ curves have been observed in high voltage (HV) NMOS devices for input transistors in amplifiers. The hump is investigated to be the main cause of the deviation for the driving current in HV NMOS transistors. It also makes the matching between two input transistors worse and consequently aggravates the analog output characteristics. By simply modifying the active layout of HV NMOS transistors, this hump was removed and the analog characteristics (AVO &dVO) were improved significantly. In the help of the improved analog characteristics, it also became possible to reduce the size of the input transistors less than a half of conventional transistors and significantly improve the integration density of LDIs.

• 한국CDE학회논문집
• /
• 제10권3호
• /
• pp.210-216
• /
• 2005

Digital manufacturing could be very effective in shipbuilding in order to estimate the process time, to improve the operation efficiency, and to prevent bottleneck processes in advance. The subassembly process having done research consists of piece arrangement, tack welding, robot welding, manual welding and so on. The robot welding of them was the focus of the simulation. The analysis and modeling were carried out by using UML (Unified Modeling Language) as well as $IDEF\phi$ (Integration DEFinition). The characteristics of the process resources were analyzed using the shipyard data, and the layout of the subassembly line was designed with the resources. Using the constructed resource and process model, the productivity and efficiency of changed robot welding stage were investigated. It was simulated how much the variations in the resource performance have influence on improvement of productivity. One of the important outputs in this simulation was the cycle time during a certain period's work. The cycle time prediction was also undertaken for the different torch and the different piece arrangement. The proposed model was established three-dimensionally in a digital environment so that interferences among objects and space allocations for the resources could be easily investigated.

• 신재생에너지
• /
• 제9권4호
• /
• pp.32-39
• /
• 2013

A 2-loop waste heat recovery system with Rankine steam cycles for the improvement of fuel efficiency of gasoline vehicles has been investigated. A high temperature loop is used to recover waste heat from exhaust gas and a low temperature loop is used to recover waste heat from cold engine coolant. This paper has dealt with a layout of low temperature loop system, the review of the velocity contours through numerical analysis. According to the result of analysis, the designed heat exchanger. And comparing with flow analysis results, LT Boiler is safe to operation.

• 한국문헌정보학회지
• /
• 제43권2호
• /
• pp.171-192
• /
• 2009

현재까지 우리나라에서 출판된 큰글자도서는 저시력자를 위한 교재가 전부였다. 하지만 최근 독서문화진흥법에서 노령화에 인해 독서자료를 이용할 수 없는 사람들도 독서장애인이라고 정의한만큼 향후 노인을 위한 큰글자도서가 더 많이 보급되어야 할 필요가 있다. 본 연구는 노인용 큰글자도서 개발을 위한 적정문자를 밝히고자 80명의 노인들을 대상으로 조사연구 하였다. 연구 목적으로 문자 모양과, 문자 크기, 문자의 행간, 도서의 판형 등에 대한 선호도를 명확하게 밝히는 것으로서 연구방법은 설문조사와 참여관찰 등을 통한 질적연구를 동시에 수행하였다.

• 한국정보통신학회논문지
• /
• 제15권1호
• /
• pp.183-187
• /
• 2011

고분자 안정화 블루상 액정셀(Polymer-stabilized blue phase liquid crystal cell)은 ${\mu}s$ 단위의 응답속도와 광시야각 및 액정의 배향을 위한 문지름 과정이 필요 없는 장점이 있다. 그러나 높은 구동전압과 낮은 kerr 상수값으로 인해 유도되는 복굴절의 값이 낮아 고분자 안정화 블루상 액정셀의 전기광학특성을 저해하는 요인이 되었다. 본 논문에서는 지그재그 형태의 전극 구조를 제안하고 시뮬레이션을 통하여 제안된 전극 구조를 가지는 액정셀의 투과율 손실 없이 구동전압을 25%이상 낮출 수 있음을 확인하였다.

• Corrosion Science and Technology
• /
• 제16권6호
• /
• pp.294-297
• /
• 2017

For the longer service life of steel pile, cathodic protection is selected sometimes at corrosive environment. The cathodic protection design improvement was investigated in this study. The current demand for cathodic protection was calculated from the potentiostatic current monitoring of the steel specimen in the deaerated soil samples. In this study, the current distribution was studied using the Boundary Element Method (BEM) and the Finite Element Method (FEM) numerical analysis methods. The optimum layout of the anode was developed and confirmed by numerical analysis. Under the conventional design of the anode, the length of the anode hole is same as the pile length. We found that, at the bottom end of the pile, the current density is too high. When the anode hole length was 80% of the pile length, the current consumption at the end was reduced. The construction cost of anode hole drilling was decreased about 20%, as compared to the conventional design. Furthermore, the life of the anode materials could be extended by reducing the current consumption at the end section. Using this approach, the construction cost was reduced significantly without any under-protection area on the steel piles.

• 대한조선학회논문집
• /
• 제55권2호
• /
• pp.116-123
• /
• 2018

These days, geographic information system has released in everyday life and industries. However, the shipyard only uses it to manage the layout of the yard. In this study, we apply the Geographic Information System to shipbuilding block logistics simulation to analyse the behavior of bogies and forklifts carrying blocks and materials in the shipyard. The shipyard manages daily block logistics plans at the execution planning stage. However, since it is a daily plan, it is difficult to respond to an unexpected situation immediately, and application to judge a certain value or higher value is insufficient. Therefore, a simulation model was created using the shape and attribute information inherent in the geographic information system to verify and improve the block logistics of the mid-and long-term yards. Through this simulation model, we will analyse loads on the workplace, stockyard, and road, and contribute to overall logistics improvement from the point of view of resource planning. In addition, the results of the simulation are reflected in the planning, to help support various decisions.

• 한국통신학회논문지
• /
• 제37권8B호
• /
• pp.677-686
• /
• 2012

In the presence of a high power cellular network, picocells are added to a Macro-cell layout aiming to enhance total system throughput from cell-splitting. While because of the different transmission power between macrocell and picocell, and co-channel interference challenges between the existing macrocell and the new low power node-picocell, these problems result in no substantive improvement to total system effective throughput. Some works have investigated on these problems. Pico Cell Range Expansion (CRE) technique tries to employ some methods (such as adding a bias for Pico cell RSRP) to drive to offload some UEs to camp on picocells. In this work, we propose two solution schemes (including cell selection method, channel allocation and serving process) and combine new adaptive frequency partitioning reuse scheme to improve the total system throughput. In the simulation, we evaluate the performances of heterogeneous networks for downlink transmission in terms of channel utilization per cell (pico and macro), call blocking probability, outage probability and effective throughput. The simulation results show that the call blocking probability and outage probability are reduced remarkably and the throughput is increased effectively.

• 대한안전경영과학회지
• /
• 제12권3호
• /
• pp.207-214
• /
• 2010

The picking process in distribution center is one of the most difficult and time-consuming process. The improvement of picking productivity is a core element which decides efficiency of the distribution center. The time to shipping on vehicles from receiving depends on the arrangement of items or picking methods. The Pick to Light system typically is used to improve the efficiency of order picking. In some cases the layout design of Pick to Light system has been performed rather than scientific analysis by a common experience. Therefore, this study analyzed the impact of picking performance by the zone arrangement method in order picking process of Pick to Light system.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2007년도 추계학술발표대회 논문집
• /
• pp.122-127
• /
• 2007

Women's Hall is a local facility that supports women's activities in the community and has the purpose in establishing self-support for low-income women and women's participation in society. Its functions are largely separated into social welfare, education, culture, and community services. The purpose of this study is to highlight and discuss the characteristics of space for community functions among other functions of Women's Hall. It has investigated and analyzed ten cases in total of all the women's halls that have opened since 1995. The examples selected for study have been analyzed in terms of the functions of each community space, layout of the rooms, finishing materials, and colors. The result of the study indicates that social demand for women's halls is changing. However, the characteristics of the space or the environment are incapable of accommodating the change. In order for the women's halls that will open in the future to perform acceptable community functions, they need to determine the degree of satisfaction and preference of the users and come up with a specific proposal for improvement.