• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.2
• /
• pp.87-90
• /
• 2002

$LiCoO_{2}$ powders were synthesized at various temperatures using lithium hydroxide and cobalt hydroxide as precursors prepared by precipitation process and freeze-drying. In this study, the$LiCoO_{2}$ samples were synthesized via a solid state reaction with various LiOH concentration between 10 % and 30 % excess. And $LiCoO_{2}$powders were calcined at 600~$800^{\circ}C$ in a short time. Measurements of XRD and SEM were performed to characterize the properties of the prepared materials. The effect of amount of Li ions on the structural change in powder has been examined using the XRD analysis. For the not added excess of LiOH, CoOOH phase presented in the XRD pattern of $LiCoO_{2}$ due to loss of Li ions during firing. The morphology and particle size of the powders were examined using SEM. The obtained powders are high temperature-$LiCoO_{2}$HT-LiCoO$_{2}$) and homogeneous with the range of grain size in the order of hundreds of nanometers. The effects of variation of LiOH concentration on the structural change in powder were investigated using the Rietveld analysis. As an analysis result, c/a is constant by 4.99 on all occasions. Finally, the structure of HT-$LiCoO_{2}$ was simulated by the commercial software $Creius^{2}$(Molecular Simulations, Inc.) from the results of Rietveld analysis.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.1
• /
• pp.595-598
• /
• 2013

Background: Lung cancer is the leading cause of cancer death worldwide Therefore, identification of genetic as well as environmental factors is very important in developing novel methods of lung cancer prevention. However, this is a multi-layered problem. Therefore a lung cancer risk prediction system is here proposed which is easy, cost effective and time saving. Materials and Methods: Initially 400 cancer and non-cancer patients' data were collected from different diagnostic centres, pre-processed and clustered using a K-means clustering algorithm for identifying relevant and non-relevant data. Next significant frequent patterns are discovered using AprioriTid and a decision tree algorithm. Results: Finally using the significant pattern prediction tools for a lung cancer prediction system were developed. This lung cancer risk prediction system should prove helpful in detection of a person's predisposition for lung cancer. Conclusions: Most of people of Bangladesh do not even know they have lung cancer and the majority of cases are diagnosed at late stages when cure is impossible. Therefore early prediction of lung cancer should play a pivotal role in the diagnosis process and for an effective preventive strategy.

• Journal of Electrochemical Science and Technology
• /
• v.2 no.2
• /
• pp.97-102
• /
• 2011

Different amounts of excess lithium in the range of x = 0~0.3 were added to $Li_{1+x}[Mn_{0.720}Ni_{0.175}Co_{0.105}]O_2$ cathode materials synthesized using the co-precipitation method to investigate its microstructure and electrochemical properties. Pure layered structure without impurities was confirmed in the XRD pattern analysis and increasing peak intensity of $Li_2MnO_3$ was observed along with the addition of over 0.2 mol Li. The initial discharge capacity of the stoichiometric composition was determined to be 246 mAh/g, while the discharge capacity of the addition of 0.1 mol Li was obtained to be 241 mAh/g, which was not significantly different from that of the stoichiometric composition. However, the discharge capacities decreased dramatically after the addition of 0.2 and 0.3 mol Li to 162 mAh/g and 146 mAh/g, respectively. In the rate capability test, the active $Li_{1+x}[Mn_{0.720}Ni_{0.175}Co_{0.105}]O_2$ cathode material of the stoichiometric composition showed a dramatic decrease in its discharge capacity with increasing C-rate, as evidenced by the result that the discharge capacity at 5C was 13% compared with 0.1C. On the other hand, the discharge capacity of compositions containing excess lithium was improved at higher current rates. The cycling test showed that the composition containing an excess of 0.1 mol Li had the most outstanding capacity retention.

• Strategy21
• /
• s.43
• /
• pp.125-174
• /
• 2018

The purpose of this paper is to analyze the status of naval arms race in Northeast Asia. To this end, the scope of the research was limited to national security strategies, maritime strategies and naval strengthening of the United States, China, Russia and Japan. The major powers' active maritime strategies and naval arms race give some strategic implications to the Republic of Korea Navy as follows. First, China and Japan, unlike the past, are actively using submarines in offshore waters including the Korean Peninsula. Therefore, the ROK Navy must successfully promote the Jangbogo-III-class submarine, which is currently constructed, and get a nuclear-powered submarine and P-8 MPA capable of long-range and long-time operations to enhance ASW capability. Second, North Korea's current building submarines capable of loading SLBMs and SLBMs are a new threat to the ROK Navy. The current building KAMD, which focuses on terminal phase defense, cannot effectively respond to North Korea's SLBMs and should be converted to a multi-layered defense system including SM-3 at a mid-course phase. Third, as China militarizes the South China Sea, the instability of the South China Sea is growing. Therefore, the ROK Navy should strengthen its maritime cooperation with the regional countries such as Japan and ASEAN navies to protect SLOC. In conclusion, the ROK Navy needs to build a strong naval power to keep in mind that the 21st century naval rivalry in Northeast Asia is accelerating. The navy must do one's best to protect national strategic and vital interests by strengthening cooperation with regional countries. South Korea is also accelerating its defense reforms in accordance with the pattern of future warfare and the ROK Navy do one's best to have a balanced naval capability capable of actively operating in the offshore waters.

• KIEAE Journal
• /
• v.13 no.5
• /
• pp.43-50
• /
• 2013

Recent researches on plant factory system deal with the convergence of lighting technology, agricultural technology inclusive to the high-tech industries worldwide in order to respond to the decreasing crop harvest due to global warming and abnormal weather phenomena. However, the fundamental performance standard is not currently being introduced in the case of plants factory and its commercialization is not activated because of high initial investment and operating cost. Large portion of the initial investment and operating cost of a plant factory is ascribed to artificial light sources and thermal control facilities, therefore, innovation should be provided in order to improve the economics of the plant factory. As an alternative, new plant factory could harness solar thermal and geothermal systems for heating, cooling and ventilation. In this study, a natural light dependent multi-layer plant factory's thermal environment was analyzed with two-dimensional numerical methods to elicit efficient operation conditions for optimized internal physical environment. Depending on the supply air temperature and airflow rate introduced in the facility, the temperature changes around the crops was interpreted. Since the air supplied into the plant factory does not stay long enough, the ambient temperature predicted around the plating trays was not significantly different from that of the supplied air. However, the changes of airflow rate and air flow pattern could cause difference to the temperature around the planting trays. Increasing the amount of time of air staying around the planting trays could improve energy performance in case the thermal environment of a natural light based multi-layer plant factory is considered.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.6 s.324
• /
• pp.93-99
• /
• 2004

According to rapid increment of demand for wireless Local Area Network (LAN), the HyperLAN of 5.1-533GHz and 5.725-5.825GHz is newly allocated for wireless LAM in many regions over the world. Also, because most of mobile communication equipments are small, the size of antenna is important factor of effective design. In this paper, the compacted and wide bandwidth antenna is designed for wireless LAN at 5GHz band. Although the structure of U-shaped slot antenna is simple, It has large bandwidth of $10-40\%$. Also, the U-slot antenna has good radiation pattern. However, in general, the size of U-slot antenna is large. Therefore, it is difficult to apply to wireless equipment such as PDA and Notebook. This proposed antenna has a wide bandwidth by U-shaped slot in rectangular patch and is compacted by using two layered dielectric substrates and foam. For the design of U-slot antenna, the Finite Difference Time Domain method is applied. Also, the method of MPI parallel program is used for the enhancement of the analyzing speed of the FDTD method.

• Journal of Electrochemical Science and Technology
• /
• v.5 no.1
• /
• pp.32-36
• /
• 2014

The $0.3Li_2MnO_3{\cdot}0.7LiMn_{0.55}Ni_{0.30}Co_{0.15}O_2$ cathode material was prepared via a co-precipitation method. The vapor grown carbon fiber (VGCF) was used as a conductive material and its effects on electrochemical properties of the $0.3Li_2MnO_3{\cdot}0.7LiMn_{0.55}Ni_{0.30}Co_{0.15}O_2$ cathode material were investigated. From the XRD pattern, the typical complex layered structure was confirmed and a solid solution between $Li_2MnO_3$ and $LiMO_2$ (M = Ni, Co and Mn) was formed without any secondary phases. The VGCF was properly distributed between cathode materials and conductive sources by a FE-SEM. In voltage profiles, the electrode with VGCF showed higher discharge capacity than the pristine electrode. At a 5C rate, 146 mAh/g was obtained compared with 232 mAh/g at initial discharge in the electrode with VGCF. Furthermore, the impedance of the electrode with VGCF did not changed much around $9-10{\Omega}$ while the pristine electrode increased from 21.5${\Omega}$ to $46.3{\Omega}$ after the $30^{th}$ charge/discharge cycling.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.5
• /
• pp.704-716
• /
• 2008

This study aims to explore the creation of fashion design that embraces the diversity of human culture by examining oriental images that appear in the modern fashion with a focus on new paradigms that significantly affect human life as the latest trends, and by reflecting the trends of the times. The results of this study are as follows: First, this study examined that with regard to paradigm, a theoretical frame to view universe, the dichotomous, determinist, mechanism, linear paradigm collapsed to convert to undetermined, exoteric, pluralistic, indeterministic, organic, and holistic paradigm. The new paradigm is identified to have emerged before and after 1950s, and through the new paradigm, the characteristics of postmodernism such as historicality, popularity, locality, folkways and the characteristics of deconstructionism, internally mutual text, post phenomenon, undeterminability and externally exposure, destruction, poverty, decomposition and analysis, were identified. Second, the Orient is defined as the generic term referring to the entire Asian areas east of Turkey. Through the developmental process of oriental images, it was converted from the Oriental image, which mysteriously and romantically represents oriental elements, into the ethnic image that represents long time oriental traditions and indigenous culture together with the characteristics of the new paradigm. Third, the artistic characteristics of the Oriental costumes presented by Korea, China and Japan are expressed in developmental types, T-type plane structure, layered style, asymmetrical adjustment and easy silhouette, and they show indigenous characteristics of each country, for example, Chinese styles in dragon pattern, red and yellow, Japanese styles in flower design and achromatic color. Fourth, the Oriental Image, combined with the postmodernism and deconstructionism through the new paradigm, has two: one Oriental image highlights traditional elements by creating new Oriental image such as natural image, folk image, hybrid image and deconstruction image; and another is undetermined and vague by combining or decomposing Oriental or Western elements. It is expected that fashion designs that reflect these contexts of the times will contribute to the strengthening of international competitiveness.

• Applied Chemistry for Engineering
• /
• v.18 no.1
• /
• pp.48-53
• /
• 2007

Pulverization characteristics of H-kenyaite in vibration mill and exfoliation property in epoxy of pulverized H-kenyaite was investigated by using XRD, SEM, TEM. and particle size analyzer. Pulverization was conducted for 0.5~5 h. The particle morphology of sample pulverized for 1 h preserved plate-shape. However, this plate-shape disappeared in the sample pulverized for 3 h. The XRD pattern of sample pulverized for 1 h showed the characteristic peak of H-kenyaite. However, the peak disappeared in samples pulverized above 3 h, indicating severe destruction of H-kenyaite structure. TEM analysis for the kenyaite/epoxy nanocomposites exhibited only gallery expansion of 3~5 nm in non-pulverized sample, but dramatical large expansion of 5~10 nm in the samples pulverized during 1 h. This results confirm that the pulverization of wide plates composed of H-kenyaite particle have largely affect on the formation of an exfoliated kenyaite-polymer nanocomposite.

• Journal of the Korean institute of surface engineering
• /
• v.42 no.2
• /
• pp.86-94
• /
• 2009

Various types of multilayer coatings including Al/$Al_2O_3$ structure have been prepared on Nd-Fe-B permanent magnet to modify the morphology of the coating and to enhance the corrosion resistance of the magnet. Magnetron sputtering has been employed to make the multilayer coatings. $Al_2O_3$sputtering conditions were optimized in reactive sputtering by varying the deposition parameters. The formation of $Al_2O_3$ film was confirmed from the binding energy shift measured by electron spectroscopy for chemical analysis. 3 types of coating structures were designed and prepared by magnetron sputtering. The coating structures consist of (1) single Al coating, (2) modified coatings having oxide or plasma treated layer in the middle of coating structure, and (3) Al/$Al_2O_3$ multilayer coatings. Surface and cross-sectional morphologies showed that Al/$Al_2O_3$ multilayer grew as a layered structure, and that very compact Zone 3 like structure were formed. X-ray diffraction peak showed that the crystal orientations of multilayer coatings were similar to that of the bulk powder pattern. Hardness increased drastically when the Al thickness was around 1im in the Al/$Al_2O_3$ multilayer. From the salt spray test and pressure cooker test, it has been shown that the multilayer coatings showed good corrosion resistance compared to Al single or modified layer coatings.