• Bulletin of the Korean Chemical Society
• /
• 제34권7호
• /
• pp.1995-2000
• /
• 2013

Layered $Li_{1.2}(Fe_{0.16}Mn_{0.32}Ni_{0.32})O_2$ was prepared by the mixed hydroxide method at various temperatures. Xray diffraction (XRD) pattern shows that this material has a ${\alpha}-NaFeO_2$ layered structure with $R{\bar{3}}m$ space group and that cation mixing is reduced with increasing synthesis temperature. Scanning electron microscopy (SEM) reveals that nano-sized $Li_{1.2}(Fe_{0.16}Mn_{0.32}Ni_{0.32})O_2$ powder has uniform particle size distribution. X-ray absorption near edge structure (XANES) analysis is used to study the local electronic structure changes around the Mn, Fe, and Ni atoms in this material. The sample prepared at $700^{\circ}C$ delivers the highest discharge capacity of 207 $mAhg^{-1}$ between 2-4.5 V at 0.1 $mAcm^{-2}$ with good capacity retention of 80% after 20 cycles.

• 접착 및 계면
• /
• 제12권4호
• /
• pp.133-137
• /
• 2011

그래파이트 옥사이드(GO)를 tetramethylammonium hydroxide (TMAOH)수용액을 이용하여 나노 크기로 분산되어 박리된 그래파이트 옥사이드(Exfoliated Graphite Oxide: EGO)를 제조하였다. 얻어진 EGO를 $Zn(NO_3)_2{\cdot}6H_2O$, $Al(NO_3)_3{\cdot}9H_2O$, urea, trisodium citrate의 혼합용액에 넣어 격렬히 교반 후 고압멸균기에서 열수 처리하여 동시에 환원된 그래핀(RGO)과 Zn-Al 이중층상 수산화물(LDH)의 나노 복합재료를 제조하였다. 즉, EGO의 표면에 두 개의 금속이온이 흡착된 후 열수처리 환원을 통하여 Zn-Al 이중층상 수산화물이 RGO의 표면에 자유롭게 성장하여 복합화 되었다. 얻어진 그래핀/Zn-Al LDH의 구조 및 형태와 열적 특성은 FE-SEM, EDX, TEM, FT-IR, XRD, TGA와 DSC를 통하여 분석하였다.

• Bulletin of the Korean Chemical Society
• /
• 제27권9호
• /
• pp.1287-1288
• /
• 2006

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2016년도 자성 및 자성재료 국제학술대회
• /
• pp.107-107
• /
• 2016

• Journal of Electrochemical Science and Technology
• /
• 제2권3호
• /
• pp.180-185
• /
• 2011

The layered lithium-manganese oxide ($Li_2MnO_3$) as a cathode material of lithium ion secondary batteries was prepared and characterized the physico-chemical and electrochemical properties. The morphological and structural changes of MnO(OH) and $Li_2MnO_3$ are closely connected to the changes of electrochemical properties. The crystallinity of $Li_2MnO_3$ is enhanced as the annealing temperature increase, but its capacity is reduced due to the easier structural changes of less crystalline $Li_2MnO_3$ than highly crystalline one. Moreover, the addition of buffer material such as MnO(OH) into cathode causes to reduce the morphological and structural changes of layered $Li_2MnO_3$ and increase the discharge capacity and cycleability.

• Bulletin of the Korean Chemical Society
• /
• 제28권6호
• /
• pp.921-928
• /
• 2007

Three different phosphonated trisbipyridine ruthenium complexes, [(4-CH3-4'-CH2PO(OH)2-2,2'-bipyridine)- (bpy)2Ru]·(PF6)2 (Ru-P1), [(4-CH3-4'-CH2PO(OH)2-2,2'-bipyridine)3Ru]·(PF6)2 (Ru-P2), and [(4,4'-CH2PO- (OH)2-2,2'-bipyridine)3Ru]·(PF6)2 (Ru-P3) were synthesized and their photochemical and electrochemical properties were studied. These ruthenium complexes were strongly adsorbed on the surface of the layered metal oxide semiconductor K4Nb6O17 that was partially acid-exchanged and sensitized up to pH 10, while the carboxylated ruthenium complex, (4,4'-COOH-2,2'-bipyridine)3Ru·Cl2 (Ru-C) that was previously studied was sensitized only below pH 4. The visible light water reduction at K4Nb6O17 that was internally platinized and sensitized by these phosphonated Ru-complexes was comparatively studied using a reversible electron donor iodide.

• Corrosion Science and Technology
• /
• 제14권3호
• /
• pp.113-119
• /
• 2015

Alloy 82/182 weld metals had been extensively used in joining the components of the PWR primary system. Unfortunately, there have been a number of incidents of cracking caused by PWSCC in Alloy 82/182 welds during the operation of PWR worldwide. To mitigate PWSCC, optimization of water-chemistry conditions, especially dissolved hydrogen (DH) and Zn contents, is considered as the most promising and effective remedial method. In this study, the PWSCC behaviours of Alloy 182 weld were investigated in simulated PWR environments with various DH content. Both in-situ and ex-situ oxide characterizations as well as PWSCC initiation tests were performed. The results showed that PWSCC crack initiation time was shortest in PWR water (DH: 30cc/kg). Also, high stress reduced crack initiation time. Oxide layer showed multi-layered structures consisted of the outer needle-like Ni-rich oxide layer, Fe-rich crystalline oxide, and inner Cr-rich inner oxide layers, which was not altered by the level of applied stress. To analyse the multi-layer structure of oxides, EIS measurement were fitted into an equivalent circuit model. Further analyses including TEM and EDS are underway to verify appropriateness of the equivalent circuit model.

• Environmental Engineering Research
• /
• 제15권3호
• /
• pp.149-156
• /
• 2010

The objective of this study was to investigate microbial removal using layered double hydroxides (LDHs) and iron (hydr)oxides (IHs) immobilized onto granular media. Column experiments were performed using calcium alginate beads (CA beads), LDHs entrapped in CA beads (LDH beads), quartz sand (QS), iron hydroxide-coated sand (IHCS) and hematite-coated sand (HCS). Microbial breakthrough curves were obtained by monitoring the effluent, with the percentage of microbial removal and collector efficiency then quantified from these curves. The results showed that the LDH beads were ineffective for the removal of the negatively-charged microbes (27.7% at 1 mM solution), even though the positively-charged LDHs were contained on the beads. The above could be related to the immobilization method, where LDH powders were immobilized inside CA beads with nano-sized pores (about 10 nm); therefore, micro-sized microbes (E. coli = 1.21 ${\mu}m$) could not diffuse through the pores to come into contact with the LDHs in the beads, but adhere only to the exterior surface of the beads via polymeric interaction. IHCS was the most effective in the microbial removal (86.0% at 1 mM solution), which could be attributed to the iron hydroxide coated onto the exterior surface of QS had a positive surface charge and, therefore, effectively attracted the negatively-charged microbes via electrostatic interactions. Meanwhile, HCS was far less effective (35.6% at 1 mM solution) than IHCS because the hematite coated onto the external surface of QS is a crystallized iron oxide with a negative surface charge. This study has helped to improve our knowledge on the potential application of functional granular media for microbial removal.

• 한국결정성장학회지
• /
• 제30권5호
• /
• pp.194-199
• /
• 2020

2차원 층상결정구조를 갖는 금속산화물 나노시트의 조성을 제어함으로써 재료 물성 및 응용의 확장이 가능하다. 본 연구에서 니오비움(Nb)이 도핑 된 타이타늄산화물(TiO_y) 나노시트 합성에 성공함으로써 나노시트의 조성을 순수조성에서 도핑조성으로 확장할 수 있었다. 상세하게는 출발 물질인 층상 구조 금속산화물 합성 시 도핑 조성을 설계(K_0.8Ti_1.73-xNb_xLi_0.27O₄, x = 0, 0.03, 0.07)하고 고상 합성한 후 유기물처리를 통한 화학적 박리를 수행하였다. 이렇게 함으로써 니오비움이 도핑 된 타이타늄산화물 초박막 나노시트를 수득할 수 있었다. 나노시트의 크기는 x-y 방향에서 긴 길이 기준으로 2 ㎛ 이하였으며 두께(z 방향)는 약 1 nm였다. 니오비움의 도핑 여부는 XRD 및 SEM-EDS 분석을 통해 확인할 수 있었다.

• 전기전자학회논문지
• /
• 제26권3호
• /
• pp.500-505
• /
• 2022

본 연구에서는 새로운 구조의 dual gate tri-layer split channel 박막트랜지스터를 제작하였다. 전류 구동 능력을 향상시키기 위해 액티브 층의 양쪽에 게이트를 형성하였고 전하이동도를 증가시키기 위하여 액티브 층에서 채널이 형성되는 구간인 첫번째 층과 세번째 층에 전도성이 높은 ITO 층을 배치하였다. 추가적으로 분할 채널을 이용하여 채널의 series 저항을 낮추면서 분할한 채널의 측면에서도 accumulation을 유도하여 전하이동도를 향상시켰다. 기존의 single gate a-ITGZO 박막트랜지스터가 15 cm²/Vs의 전하이동도를 가지는 반면 dual gate tri-layer split channel 박막트랜지스터는 134 cm²/Vs의 높은 전하이동도를 가졌다.