• Korean Journal of Materials Research
• /
• v.6 no.7
• /
• pp.700-708
• /
• 1996

Electroless plating technique was utilized to flip chip bonding to improve surface mount characteristics. Each step of plating procedure was studied in terms pf pH, plating temperature and plating time. Al patterned 4 inch Si wafers were used as substrstes and zincate was used as an activation solution. Heat treatment was carried out for all the specimens in the temperature range from room temperature to $400^{\circ}C$ for $30^{\circ}C$ minutes in a vacuum furnace. Homogeneous distribution of Zn particles of size was obtained by the zincate treatment with pH 13 ~ 13.5, solution concentration of 15 ~ 25% at room temperature. The plating rates for both Ni-P and Au electroless plating steps increased with increasing the plating temperature and pH. The main crystallization planes of the plated Au were found to be (111) a pH 7 and (200) and (111) at pH 9 independent of the annealing temperature.

• Journal of Conservation Science
• /
• v.25 no.3
• /
• pp.283-291
• /
• 2009

Methyl Bromide that was used as fumigation gas turned out to be the substance of destroying the ozone layer. For that reason, at the Montreal Protocol in 1987 the use of methyl bromide was forbidden starting 2005 in the advanced country. Also according to the 2007 Bali Protocolly methyl bromide is expected to be forbidden and therefore the purpose of this study is to find out the effects of substitution fumigation gas (Ethylene Oxide+HFC 134a, Methyl Iodide, Cyanogen and Argon) on the metal(silver, copper and iron), wood(oregon pine), pigment(yellow, red, blue, white and black), textile(hemp, ramie, jute, silk1 and silk2 / indigo, safflower and cork) and paper. After the fumigation test, ethylene oxide+HFC 134a did not have changes in the weight and color of the material itself before and after the experiment. On exterior alteration, color change occurred partly on paper and metal. Also, in most materials color change extent was 0.5 to 1.5 on the average and showed scanty difference. The materials after the fumigation test with methyl iodide did not show weight changes after the test. However, color changes more than 1.0 was shown in most of the materials especially in dyed textile material. In blue pigment, the discoloration on the surface could be seen by naked eyes. Fumigation test with cyanogen gas did not show weight changes and discoloration is more than 1.5 before and after the test. The weight changes of test materials with the argon gas was decreased about 3 to 6%. It can be observed that discoloration on paper was generated. Color changes can be seen on jute dyed with safflower and cork for two weeks with argon gas and the extent was 6.3 and 6.0.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.2
• /
• pp.131-139
• /
• 2018

Unsaponifiables in the kernel and the cob of 7 maize varieties were analyzed by using thin-layer chromatography (TLC) and gas chromatography (GC) for the identification of phytosterols and their concentrations. The unsaponifiables of the kernel were clearly separated into band I (campesterol, stigmasterol, and ${\beta}$-sitosterol), band II (${\Delta}^5$-avenasterol), band III (${\Delta}^7$- stigmastenol), and band IV (${\Delta}^7$-avenasterol). In the cob, on the other hand, three or more bands were separated in addition to bands. The GC analysis of unsaponifiables showed good separation of campesterol, stigmasterol and ${\beta}$-sitosterol, but the mixture of ${\Delta}^7$-avenasterol (retention time[RT] 22.846), ${\Delta}^7$-stigmastenol (RT 22.852), and ${\Delta}^5$-avenasterol (RT 22.862) showed poor separation. Phytosterol content of the maize kernel was 635.9 mg/100 g, and that of the cob was 273.0 mg/100 g, respectively. The phytosterol content of the kernel was 2.4-fold higher than that of the cob. The phytosterol content of the kernel was higher in the order ${\beta}$sitosterol 80.05% > campesterol 10.5% > stigmasterol 9.46%, but that of the cob was higher in the order ${\beta}$-sitosterol 59.43% > stigmasterol 31.72% > campesterol 10.98%. Based on these results, it appears that the phytosterols of the maize kernel are synthesized in the maize cob and are transferred to the kernel, because the precursors (${\Delta}^7$-avenasterol, ${\Delta}^7$-stigmastenol, and ${\Delta}^5$-avenasterol) of major phytosterols were detected in maize cobs.

• Applied Microscopy
• /
• v.41 no.3
• /
• pp.205-213
• /
• 2011

Numerous anisakids were parasitic near the digestive tract of the black rockfish, Sebastes schlegeli and some anisakids observed on the liver of the host. Anisakids in the host were identified three species (Hysterothylacium sp., Anisakis simplex, A. pegreffii) and Hysterothylacium sp. was the high occurrence of anisakid worms in the host. Hysterothylacium sp. was shorter and thinner than A. simplex. Both of anisakids observed lip, mouth, nerve ring, excretory pore and excretory duct in the anterior portion. In the mid portion, anisakids had esophagus, ventriculus and intestine and especially, Hysterothylacium sp. had intestinal ceacum and ventricular appendage. There was conical nodulose apex at the end of the posterior portion in Hysterothylacium sp. and spine in A. simplex. SEM examination revealed that there was three lip near the mouth of Hysterothylacium sp. Dorsal lip was approximately 65 ${\mu}m$ and paried lateroventral lip were approximately 60 ${\mu}m$ in the width. All lips were found double papilla (approximately 8 ${\mu}m$ in the width). The body width of the Hysterothylacium sp. and A. simplex was approximately 480 ${\mu}m$ and 900 ${\mu}m$ respectively. The hight of the lateral alae was about 7 ${\mu}m$ and width of papilla on the cornical nodulose apex was about 3.3 ${\mu}m$ in Hysterothylacium sp. The hight of spine was approximately 20 ${\mu}m$ in A. simplex. There was mainly Hysterothylacium sp. in the intestinal lumen of the host. The nematod worms were parasitic near the mucosal fold and in the submucosal. In the mucosal epidermal layer, it was increased mucous cells by the infection of the parasites.

• Korean Journal of Food Science and Technology
• /
• v.12 no.3
• /
• pp.185-192
• /
• 1980

To study lipid components of Panax ginseng produced in Korea, the lipids of fresh ginsengs were extracted with the mixture of chloroform-methanol (2:1, v/v) and those of dried ginsengs were extracted with diethyl ether respectively. The lipid components extracted were separated and quantitated by column, thin layer and gas-liquid chromatographies. The results were summarized as follows : 1. Fresh ginseng contained 0.62% total lipid of which 45.28% were neutral lipids, 18.12% glycolipids, and 36.60% phospholipids. But dried ginseng contained 0.89% total lipids of which 86.48% were neutral lipids, 9.20% glycolipids, and 4.32% phospholipids. 2. Triglycerides (37.6 to 42.5% of the total neutral lipids) and sterol esters (16.5 to 19.6%) in all the fresh and dried ginseng were the major components among the neutral lipids. Monoglycerides, diglycerides, free fatty acids and free sterols were minor components. 3. Digalactosyl diglycerides (23.5% of the total glycolipids) in the fresh ginseng and steryl liglycosides (28.9%) in the dried ginseng were predominant components among the glycopids, respectively, Esterified steryl glycosides and monogalactosyl diglycerides were also identified, and four unknown spots in the fresh ginseng and two unknown spots in the dried ginseng were present. 4. Phosphatidyl cholines (31.3 to 31.9% of the total phospholipids) and phosphatidyl glycerols (34.8 to 36.7%) in all the fresh and dried ginseng were the major components among the phospholipids. Phosphatidyl inositols and phosphatidyl ethanolamines were also identified. 5. The major fatty acids in the fresh and dried ginseng were linoleic $(62.29{\sim}64.32%)$, palmitic $(13.16{\sim}15.63%)$, oleic $(5.73{sim}7.23%)$ and linolenic $(5.73{sim}7.23%)$. The fatty acid compositions in neutral lipid fraction was similar to the pattern in those of the total lipids. But glycolipid and phospholipid fractions contained a lower percent of linoleic acid and a higher percent of palmitic acid than the neutral lipid fraction.

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.246-257
• /
• 2008

The purpose of this study was to investigate the influence of various occlusal loading sites and directions on the stress distribution of the cervical composite resin restorations of maxillary second premolar, using 3 dimensional (3D) finite element (FE) analysis. Extracted maxillary second premolar was scanned serially with Micro-CT (SkyScan1072; SkyScan, Aartselaar, Belgium). The 3D images were processed by 3D-DOCTOR (Able Software Co., Lexington, MA, USA). HyperMesh (Altair Engineering. Inc., Troy, USA) and ANSYS (Swanson Analysis Systems. Inc., Houston, USA) was used to mesh and analyze 3D FE model. Notch shaped cavity was filled with hybrid (Z100, 3M Dental Products, St. Paul, MN, USA) or flowable resin (Tetric Flow, Viva dent Ets., FL-9494-Schaan, Liechtenstein) and each restoration was simulated with adhesive layer thickness ($40{\mu}m$). A static load of 200 N was applied on the three points of the buccal incline of the palatal cusp and oriented in $20^{\circ}$ increments, from vertical (long axis of the tooth) to oblique $40^{\circ}$ direction towards the buccal. The maximum principal stresses in the occlusal and cervical cavosurface margin and vertical section of buccal surfaces of notch-shaped class V cavity were analyzed using ANSYS. As the angle of loading direction increased, tensile stress increased. Loading site had little effect on it. Under same loading condition. Tetric Flow showed relatively lower stress than Z100 overall, except both point angles. Loading direction and the elastic modulus of restorative material seem to be important factor on the cervical restoration.

• Economic and Environmental Geology
• /
• v.40 no.5
• /
• pp.587-604
• /
• 2007

In order to investigate the vertical variations and speciations of trace elements, and their correlations in Hoidong reservoir, sediment cores (21-41 cm below surface) and interstitial water samples were collected from five sampling locations. The total average concentrations of trace metals in sediment core samples were $232{\pm}30.8mg/kg$ for Zn, $119{\pm}272mg/kg$ for Cu, $58.4{\pm}4.1mg/kg$ for Pb, $15.7{\pm}3.3mg/kg$ for Ni and $1.6{\pm}0.3mg/kg$ for Cd. The total concentrations of trace metals in core sediments generally decreased toward the center of the Hoidong reservoir. The total concentrations of Mn, Pb and Zn decreased with depth for all the sample locations, while Cu and Fe concentrations increased. The trace metal concentrations of interstitial water sample were in the order of Fe>Mn>Cu>Zn, but Cd, Ni and Pb were not detected. The concentrations of Zn, Cu, Fe and Mn in the interstitial water samples showed a tendency of increasing toward the bottom of the core, suggesting a possible upward diffusion. This migration of trace metals may lead to their transfer to the sediment-water interface. These trace elements would be subsequently fixed onto amorphous Fe and Mn-oxides and carbonates in the topmost layer of sediment. Based on the $K_D$ values, the relative mobilities of the studied metals were in the order of Mn>Cu>Zn>Fe. Geochemical partitioning confirmed that surface enrichment by trace metals mainly resulted from a progressive increase of the concentrations in the fractions II and III. Copper, Fe, Mn and Zn concentrations of interstitial water were closely correlated with their exchangeable fractions of sediments.

• Korean Journal of Ecology and Environment
• /
• v.39 no.2 s.116
• /
• pp.167-177
• /
• 2006

Both fish community and water quality in Lake Doam were investigated from September 2004 to August 2005. The turbidity of Lake Doam located in the upper region of the Songchun River in the South River system, Korea was high whole year due to the effects of distributed non point source pollutions in the watersheds. During the experimental periods, mean concentration of chlorophyll-a in epilimnetic layer (0 ${\sim}$ 5 m) was 18.5 ${\mu}g\;L^{-1}$ and transparency ranged from 0.3 m to 2.4 m. Average TP and TN concentrations were 111 ${\mu}g\;L^{-1}$ and 4.1 $mg\;L^{-1}$, respectively. Lake was classified as eutrophic state based on the nutrient concentrations suggested by U.S.EPA (1976). Total number of fish collected in Lake Doam was 9,600 individuals in 26 species of 6 family. Both dominant and subdominant species in the lake were P. herzi (34.9%) and Z. platypus (22.5%), respectively. Occurrence of water column species was high at upper region of the lake, whereas benthic type of species highly ,appeared in downstream area. The different fish assemblage between upper and lower area would be considered as the difference of bottom substrate and concentrations of suspended solids. In addition high appearance of Comat type of fish that is hybrid between gold fish (C, auratus) and C. auratus was found in the lake. It was unclear the reasons that high proportion of mutant species appeared in the lake. More researches are required in this area in future.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.20 no.6
• /
• pp.509-519
• /
• 1987

Annual reproductive cycle of the Damselfish, Chromis notatus collected monthly at the four coastal areas around Chejudo, Korea are studied on the bases of histological observations of gonadal tissue and various quantitative variables including gonadosomatic index (GSI), fatness, egg diameter composition and the first maturity. The ovary consisted of a pair of saccular structure with many ovarian sacs. Oogonia proliferated along the germinal epithelium of the ovarian sac. Young oocytes with basophilic cytoplasm showed several nucleoli along the nuclear membrane. When the oocytes reached about $450{\mu}m$ in diameter, nucleus migrate toward the animal pole, nuclear membrane disappeared and most of cytoplasm were filled with yolk materials and oil drops. After ovulation, residual follicle and growing oocytes remaining in the ovarian sacs degenerated. But early young oocytes without follicle layer were not degenerated, and growing continuously till the next year. The testis consisted of a pair of lobular structures in the right and left were united in the posterior seminal vesicle. Cortex of testis was composed of many sperm ducts connected with lobuli. GSI began to increase from March, starting season of longer day length and higher water temperature, and reached the maximum value between June and August. It began to decrease from September with the lowest value appearing between October and February without any evident variation. The annual reproductive cycle could be devided into five successive stage : growing(April to Many), mature(May to August), ripe and spent (June to August) and recovery and resting stage(September to March). The spawning peak occurred from June to August. According to the frequency distribution of egg diameter, Chromis notatus was a polycyclic species to spawn twice or more in a spawning season. Fatness, correlated with gonadal phases, was remarkably decreased by spawning. Percentage of the first maturity . in femate and male fish ranging from 7.0 to 7.9 cm were $50\%$ and from 9.0 to 9.9 cm in total length $100\%$.

• Tuberculosis and Respiratory Diseases
• /
• v.50 no.2
• /
• pp.205-212
• /
• 2001

Background : The information on nasal transport and the metabolism of peptides have been obtained from pharmacokinetic investigations in experimental animals. However, there are no transport and metabolic studies of human nasal epithelial cells. In this study, the permeability characteristics and the metabolic properties of in vitro human nasal cell monolayers were investigated. Material and Methods : Normal human inferior nasal conchal tissue samples were obtained from patients undergoing endoscopic nasal cavitary surgery. The specimens were cultured in a transwell using an air-liquid Interface (ALI) culture, and the transepithelial electrical resistance (TEER) value of the blank filter and confluent cell monolayers were measured. To determine the % leakage of mannitol, $4{\mu}mol%$ $^{14}C$-labelled mannitol was added and the % leakage was measured every 10 minute for 1 hour. Result : Human nasal epithelial cells in the primary culture grew to a confluent monolayer within 7 days and expressed microvilli. The tight junction between the cells was confirmed by transmission electron microscopy. The TEER value of the blank filter, fifth day and seventh day reached $108.5\;ohm.cm^2$, $141\;ohm.cm^2$ and $177.5\;ohm.cm^2$, respectively. Transcellular % leakage of the $^{14}$-mannitol at 10, 20, 30, 40, 50 and 60 minutes was $35.67{\pm}5.43$, $34.42{\pm}5.60$, $32.75{\pm}5.71$, $31.76{\pm}4.22$, $30.96{\pm}3.49$ and $29.60{\pm}3.68\;%$, respectively. Conclusion : The human nasal epithelial monolayer using ALI culture techniques is suitable for a transcellular permeability study. The data suggests that human nasal epithelial cells In an ALI culture technique shows some promise for a nasal transport and metabolism study.