• International Journal of Highway Engineering
• /
• v.18 no.2
• /
• pp.83-90
• /
• 2016

PURPOSES : Nowadays, cavity phenomena occur increasingly in pavement layers of downtown areas. This leads to an increment in the number of potholes, sinkholes, and other failure on the road. A loss of earth and sand from the pavement plays a key role in the occurrence of cavities, and, hence, a structural-performance evaluation of the pavement is essential. METHODS: The structural performance was evaluated via finite-element analysis using KPRP and KICTPAVE. KPRP was developed in order to formulate a Korean pavement design guide, which is based on a mechanical-empirical pavement design guide (M-EPDG). RESULTS: Installation of the anti-freezing layer yielded a fatigue crack, permanent deformation, and international roughness index (IRI) of 13%, 0.7 cm, and 3.0 m/km, respectively, as determined from the performance analysis conducted via KPRP. These values satisfy the design standards (fatigue crack: 20%, permanent deformation: 1.3 cm, IRI: 3.5 m/km). The results of FEM, using KICTPAVE, are shown in Figures 8~12 and Tables 3~5. CONCLUSIONS: The results of the performance analysis (conducted via KPRP) satisfy the design standards, even if the thickness of the anti-freezing layer is not considered. The corresponding values (i.e., 13%, 0.7 cm, and 3.0 m/km) are obtained for all conditions under which this layer is applied. Furthermore, the stress and strain on the interlayer between the sub-grade and the anti-freezing layer decrease gradually with increasing thickness of the anti-freezing layer. In contrast, the strain on the interlayer between the sub-base and the anti-freezing layer increases gradually with this increase in thickness.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.6
• /
• pp.637-647
• /
• 2010

Recent embedded systems are being more complicated due to their hierarchical software architecture including operating systems. The performance of such complicated software architecture could not be well analyzed through separate analysis of each software layer; the combined effect and the interactions among the whole software layers should be considered. In this paper, we show the design and implementation of a performance analysis framework that enables hierarchical analysis of performance of Linux-based embedded systems considering interactions among the software layers. By using the proposed framework, we can obtain useful run-time information about a hierarchical software structure which usually consists of user-defined function layer, library function layer, system call layer, and kernel events layer. Experimental results reveal that the proposed framework could accurately identify the performance bottlenecks with the corresponding software layers during executions of target applications through the accompanying sub-steps of the analysis: the actual execution paths, the execution time of each observed event in each software layer, and the control flows across the software layers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.1
• /
• pp.17-32
• /
• 1996

In this paper, a model for two-layered video traffic is proposed. The performance analysis of the proposed model and the effects of two-layer coding scehemes in ATM networks are also studied. ATM-based networks give the possibility to support image codingat variable bit rate(VBR). Two layer coding is one of the very promising methods among many proposed methods to compensate the cell loss, the major drawback in ATM networks. From the experimental data of the 2-layer coded video traffics, it is observed that traffic patterns of base layer and enhanced layer are highly correlate to each other, when constant image quality is kept. With this observation, coded two layered video traffic can be modeled as 2-dimensional Markov chain. The model well fit the real experimental data. The model was used for the analysis of the performance of statistical multiplexer with priorites in ATM networks.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.3
• /
• pp.19-27
• /
• 2019

This paper proposes a new method using multi-layer overlapped windows to improve the performance of YOLO network which is vulnerable to detect small dense objects. In particular, the proposed method uses the YOLO Network based on the multi-layer overlapped windows to track small dense vehicles that approach from long distances. The method improves the detection performance for location and size of small vehicles. It allows crossing area of two multi-layer overlapped windows to track moving vehicles from a long distance to a short distance. And the YOLO network is optimized so that GPU computation time due to multi-layer overlapped windows should be reduced. The superiority of the proposed algorithm has been proved through various experiments using captured images from road surveillance cameras.

• Proceedings of the Korea Contents Association Conference
• /
• 2005.11a
• /
• pp.364-370
• /
• 2005

LBL(Layer-By-Layer) algorithms have been proposed to accelerate the training speed of MLPs(Multilayer Perceptrons). In this LBL algorithms, each layer needs a error function for optimization. Especially, error function for hidden layer has a great effect to achieve good performance. In this sense, this paper proposes a new hidden layer error function for improving the performance of LBL algorithm for MLPs. The hidden layer error function is derived from the mean squared error of output layer. Effectiveness of the proposed error function was demonstrated for a handwritten digit recognition and an isolated-word recognition tasks and very fast learning convergence was obtained.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5C
• /
• pp.485-497
• /
• 2009

In this paper, we described DVB-S2 system for mobility. cross layer coding technique are needed to maintain the performance in deep fading channel. Cross layer coding is divided into two kinds of level. First level is Physical layer coding and, second layer is link layer or upper layer coding. Fixed on DVB-S2 short frame coding method as a physical layer, we simulated the various coding method as an upper layer coding. Furthermore, we analyzed the performance of each coding method on according to mobile vehicle speed, data rate, interleaving memory size, and IP packet size.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.2
• /
• pp.109-120
• /
• 2001

In this paper, we propose the design and implementation of a portable, extensible, and efficient performance visualization framework for high performance parallel program development. The framework adopts a layered architecture:consists of three independent layers instrumentation layer, trace interface layer and visualization layer. The instrumentation layer was constructed as an ECL which captures generated events, and the EDL/JPAL constitutes the trace interface layer to provide problem-oriented interfaces between visualization layer and instrumentation layer. Finally, the visualization layer was designed as plug-and-play style for easy elimination, addition and composition of various filters, views and view groups, The proposed performance visualization framework is expected to be used as an independent performance debugging and analysis tool and as a core component in an integrated parallel programming environment.

• Korean Chemical Engineering Research
• /
• v.55 no.4
• /
• pp.483-489
• /
• 2017

The loss of the sulfur cathode material through dissolution of the polysulfide into electrolyte causes a significant capacity reduction of the lithium-sulfur cell during the charge-discharge reaction, thereby debilitating the electrochemical performance of the cell. We addressed this problem by using a chemical and physical approach called reduction of polysulfide dissolution through direct coating functional inorganic (graphene oxide) or organic layer (polyethylene oxide) on electrode, since the deposition of external functional layer can chemically interact with polysulfide and physically prevent the leakage of lithium polysulfide out of the electrode. Through this approach, we obtained a composite electrode for a lithium-sulfur battery (sulfur: 60%) coated with uniform and thin external functional layers where the thin external layer was coated on the electrode by solution coating and drying by a subsequent heat treatment at low temperature (${\sim}80^{\circ}C$). The external functional layer, such as inorganic or organic layer, not only alleviates the dissolution of the polysulfide electrolyte during the charging/discharging through physical layer formation, but also makes a chemical interaction between the polysulfide and the functional layer. As-formed lithium-sulfur battery exhibits stable cycling electrochemical performance during charging and discharging at a reversible capacity of 700~1187 mAh/g at 0.1 C (1 C = 1675 mA/g) for 30 cycles or more.

• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.4
• /
• pp.320-325
• /
• 2013

TUnitized reversible fuel cells (URFC) combine the functionality of a fuel cell and electrolyzer in one unitized device. For a URFC with proton exchange membrane, a titanium (Ti)-felt is applied to the gas diffusion layer (GDL) substrate at the oxygen electrode, and additionally titanium (Ti)-powders and TiN-powders are loaded in the GDL substrate as a micro porous layer (MPL). Double porous layer with TiN MPL was not acceptable for the URFC because both of fuel cell performance and electrolysis performance are degraded. The double porous layer with Ti-powder loading in the Ti-felt substrate influence rearly for the electrolysis performance. In contrast, the change of pore-size distribution brings a significant improvement of fuel cell performance under fully humidification conditions. This fact indicates that the hydrophobic meso-pores in the GDL play an important role for mass transport.

• Transactions of the Korean hydrogen and new energy society
• /
• v.21 no.6
• /
• pp.540-546
• /
• 2010

In order to confirm the effect of Nafion ionomer content in catalyst layer on the performance of PEMFC, we have fabricated several electrodes which were prepared by varying the quantity of Nafion ionomer from 24 wt.% to 39 wt.% in catalyst layer. The effect of Nafion ionomer of each electrode was evaluated with cyclic voltammetry measurement. In addition, cell performance was obtained through single cell test using hydrogen and air. The Pt utilization and performance of single cell were changed by addition of Nafion ionomer to the electrode. Single cell fabricated with 33 wt.% of Nafion ionomer in catalyst layer showed the maximum Pt utilization and performance.