• 제목/요약/키워드: Layer Mixing

검색결과 675건 처리시간 0.033초

Tidal Front in the Main Tidal Channel of Kyunggi Bay, Eastern Yellow Sea

  • Lee, Heung-Jae;Lee, Seok;Cho, Cheol-Ho;Kim, Cheol-Ho
    • Journal of the korean society of oceanography
    • /
    • 제37권1호
    • /
    • pp.10-19
    • /
    • 2002
  • The detailed structure of a tidal front and its ebb-to flood variation in the main tidal channel of the Kyunggi Bay in the mid-west coast of Korea were investigated by analyzing CTD data and drifter trajectories collected in late July 1999. A typical tidal front was formed in water about 60 m deep at the mouth of the channel. Isotherms and isohalines in the upper layer above the seasonal pycnocline in the offshore stratified zone inclined upward to the sea surface to form a surface front, while those in the lower layer declined to the bottom front. The location of the front is consistent with $100 S^3/cm^2$ of the mixing index H/U defined by Simpson and Hunter (1974), where H is the water depth and U is the amplitude of tidal current. The potential energy anomaly in the frontal zone varied at an ebb-to flood tidal cycle, showing a minimum at slack water after ebb but a maximum at slack water after flood. This ebb-to flood variation in potential energy anomaly is not accounted for by the mixing index. We conclude that on- and offshore displacement of the water column by tidal advection is responsible for the ebb-to-flood variation in the frontal zone.

개량 벤토나이트와 현장토 혼합 차수층의 염수조건하에서의 투수성 평가 (Assessment of Hydraulic Conductivity of Modified Bentonite and Local Soil Mixture under Salt Water Condition)

  • 서흠;오명학;박준범
    • 한국지반공학회논문집
    • /
    • 제33권11호
    • /
    • pp.97-104
    • /
    • 2017
  • 벤토나이트와 현장토를 혼합하여 차수재료로 폐기물 매립장의 차수층에 많이 적용하고 있다. 차수층으로 사용되는 재료는 일반적으로 투수계수가 $1{\times}10^{-7}cm/s$ 이하인 재료를 사용한다. 벤토나이트를 현장에서 차수층 재료로 사용될 때 벤토나이트는 건조-수축 균열 발생 및 염수조건에서 팽창성 떨어지고 차수 기능을 상실하는 등의 문제점이 존재한다. 벤토나이트의 문제점을 극복하기 위해 본 연구에서는 균열 방지 및 해수조건에서 차수성을 확보할 수 있는 내염성 벤토나이트를 개발하였고, 건조수축균역 시험, 팽윤도 시험, 다짐시험 및 투수실험을 통해 내염성 벤토나이트의 혼합비 결정 및 성능을 평가하였다.

서울지역 연직 오존 분포: 2003년 6월 6~9일 오존존데 관측 (Vertical Ozone Distribution over Seoul: Ozonesonde Measurements During June 6~9, 2003)

  • 황미경;김유근;오인보;송상근;임윤규
    • 한국대기환경학회지
    • /
    • 제24권2호
    • /
    • pp.196-205
    • /
    • 2008
  • 오존 농도와 기상 인자의 연직관측을 수행하여 오존분포와 하부 대기구조와의 관계를 분석하였다. 관측은 서울 방이동에서 2003년 6월 $6{\sim}9$일에 하루 2회씩(주 야간)총 8회에 걸쳐 이루어졌으며, 고도 5 km 이내의 관측결과를 중심으로 대기경계층 일변화와 연직 오존농도 변화를 집중분석하였다. 관측 결과, 대기경계층 내 야간안정층 및 혼합층 발달에 따라 큰 오존농도 분포변화를 확인할 수 있었다. 야간에는 안정층 내에서 $NO_x$ 적정반응으로 0에 가까운 낮은 오존농도를 나타내었다. 한편 오후에는 혼합층 내에서 비교적 일정한 오존농도 분포를 나타내며, 대기경계층 상부에서 100 ppb 이상의 최고 농도가 관측되었다. 특히 지표부근 오존농도가 높았던 6월 8일의 관측결과를 통해, 오존의 생성 소멸과 관련한 국지효과뿐만 아니라 제한된 혼합층 발달이 고농도오존 발생에 중요한 영향을 미침을 확인할 수 있었다. 또한 관측 기간 중, 국지규모 이상의 수송효과에 의한 대기경계층 상부의 농도 상승과 종관기류 변화에 따른 수송 효과가 간접적으로 확인되었다. 연직 오존분포 분석에 있어 충분치 않은 관측 자료로 인해 정확한 시간적 변동을 고찰할 수 없는 한계를 보였다. 하지만 본 연구를 통해 서울지역 대기하층의 오존 분포 변화와 기상학적 특징을 살펴봄으로서 고농도오존 현상의 역학적인 이해를 도울 것으로 생각되며, 관측 결과는 도시 오존제어를 위한 광화학 수치모델링의 기초 자료로 활용될 수 있을 것이다.

Viscoelastic Properties of Fresh Cement Paste to Study the Flow Behavior

  • Choi, Myoungsung;Park, Kyoungsoo;Oh, Taekeun
    • International Journal of Concrete Structures and Materials
    • /
    • 제10권sup3호
    • /
    • pp.65-74
    • /
    • 2016
  • During concrete pumping, the migration and redistribution of particles occur in a pipe and the lubrication layer that forms between the bulk concrete and the pipe wall is the governing factor determining the flow behavior. In order to identify flow behavior of pumping, in this study, the viscoelastic properties related to the microstructural behavior of a flocculated suspension were examined by using dynamic oscillatory measurements. Cement paste is assumed to be a constituent material of the lubrication layer and ten cases of mixing design are employed by changing the proportions of mineral admixtures. The relationship between the yield stress obtained from the steady shear test and the dynamic modulus resulted from the oscillatory shear measurement was derived and the implications of the correlation are discussed. Moreover, based on the investigation of the viscoelastic properties with oscillatory measurements, the initial behavior of pumped concrete was analyzed systematically.

Photosensitive Black Matrix Paste for Bus Electrode of PDP

  • Woo, Chang-Min;Kim, Duck-Gon;Kim, Dong-Ju;Song, Gab-Deuk;Kim, Soon-Hak;Cho, Ho-Young;Lee, Yoon-Soo;Park, Lee-Soon
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
    • /
    • pp.1360-1363
    • /
    • 2007
  • The bus electrode is composed of two layers. One is the black matrix(BM) and silver layer is formed on top of black layer. The BM paste is made by mixing $Co_3O_4$ black powder with photosensitive vehicle and rheological additives. In this work we studied the effect of $Co_3O_4$ black powder and glass frit on the rheological property of photosensitive BM paste. We also examined how the size and content of black powder and glass frit affect the transmittance and reflectance of the BM layer after sintering.

  • PDF

An Experimental Investigation of the Interfacial Condensation Heat Transfer in Steam/water Countercurrent Stratified Flow in a Horizontal Pipe

  • Chu, In-Cheol;Yu, Seon-Oh;Chun, Moon-Hyun;Kim, Byong-Sup;Kim, Yang-Seok;Kim, In-Hwan;Lee, Sang-Won
    • 한국원자력학회:학술대회논문집
    • /
    • 한국원자력학회 1998년도 춘계학술발표회논문집(1)
    • /
    • pp.565-570
    • /
    • 1998
  • An interfacial condensation heat transfer phenomenon in a steam/water countercurrent stratified flow in a nearly horizontal pipe has been experimentally investigated. The present study has been focused on the measurement of the temperature and velocity distributions within the water layer. In particular, the water layer thickness used in the present work is large enough so that the turbulent mixing is limited and the thermal stratification is established. As a result, the thermal resistance of the water layer to the condensation heat transfer is increased significantly. An empirical correlation of the interfacial condensation heat transfer has been developed. The present correlation agrees with the data within $\pm$15%

  • PDF

차광정도와 접종목 흔용이 천마의 수량에 미치는 영향 (Effects of Shading and Mixing Ratio of Recycling Spawn bed Logs on the Yield of Gastrodia elata Blume)

  • 권용환;이정동;정도철;윤세진;황영현
    • 한국자원식물학회지
    • /
    • 제18권3호
    • /
    • pp.512-517
    • /
    • 2005
  • 천마 재배에서 차광방법 개발과 접종목 재활용의 가능성을 검정하여 저 비용, 고 생산의 재배법을 확립하기 위한 실험을 수행하였다. 비가림을 하지 않은 노지재배에서는 종마의 수량이 성마의 수량 보다 높았다. 차광 방법에 따른 천마의 수량은 $95\%$ 차광망 1겹, 2겹 및 무차광순 이었으며, 접종목 혼용에 따른 천마의 수량은 생목만 사용하였을 경우에 가장 높았고, 다음으로는 생목과 재활용목을 2:1로 및 1:1 혼용처리 처리 순이었다. 접종목 혼용에 따른 수익성 비교에서 $95\%$ 차광막 1겹 처리시 생목과 재생목을 2:1로 혼용한 경우는 생목만 사용한 경우 수익의 $81\%$이었다. 재배법 개선을 통해 수량성을 높일 수 있다면 생목과 재생목을 적당한 비율로 섞어 재배할 경우 비용 절감과 환경보호 차원에서 유용한 방법으로 사료된다.

국산밀을 이용한 white layer cake의 제조 적성 (White Layer Cake-Making Properties of Korean Wheat Cultivars)

  • 김상화;이영택;장학길;원준형;남중현
    • 한국식품과학회지
    • /
    • 제34권2호
    • /
    • pp.194-199
    • /
    • 2002
  • 8품종의 국산밀에 대한 이화학적 특성 및 white layer cake 제조 특성을 조사하였다. 국산밀의 제분율은 $62.5{\sim}71.8%$의 분포로 품종간의 차이가 큰 것으로 나타났다. 국산밀가루의 단백질 함량은 $7.70{\sim}10.58%$의 범위였으며, 회분 함량는 $0.51{\sim}0.71%$의 범위로 수입밀 박력분에 비해 다소 높았다. 국산밀가루의 mixograph 반죽특성에서 우리밀, 알찬밀, 올그루밀의 반죽 물성이 매우 약해 cake의 제조에 적합하였고 은파밀, 그루밀은 단백질 함량에 비해 안전성이 다소 떨어졌으며, 금강밀과 탑동밀가루는 반죽의 안정성이 높은 경질밀의 특성을 보여 cake의 제조에 부적합함을 보여주었다. 국산밀 cake반죽의 pH와 비중은 각각 $6.71{\sim}7.08,\;0.73{\sim}0.76\;g/cc$의 범위로 박력분 반죽과의 차이가 크지 않은 것으로 나타났다. White layer cake의 부피, 비체적은 각각 $837.5{\sim}952.5\;cc,\;2.16{\sim}2.40\;cc/g$의 범위로 알찬밀이 가장 높은 값을 주었다. 국산밀 cake은 symmetry와 uniformity에서 박력분 제조 cake 보다 약간 떨어지는 경향을 주었다. 국산밀 cake의 crumb 색도는 박력분 보다 다소 어둡고 황색도가 높은 것으로 나타났다. 국산밀 cake의 텍스쳐는 품종에 따라 차이를 보였으며 알찬밀, 우리밀에서 경도가 낮아 부드러운 것으로 나타났다.

부산지역 겨울철 고농도 미세먼지 발생일의 기상학적 특성 (Meteorological Characteristics of the Wintertime High PM10 Concentration Episodes in Busan)

  • 전병일
    • 한국환경과학회지
    • /
    • 제21권7호
    • /
    • pp.815-824
    • /
    • 2012
  • The purpose of this study was to analyze the meteorological characteristics of wintertime high PM10 concentration episodes in Busan. $PM_{10}$ concentration has been reduced for the past four years and recorded near or exceeded 100 ${\mu}g/m^3$ (national standard of $PM_{10}$). High concentration episodes in Busan were 6 case, $PM_{2.5}/PM_{10}$ ratio was 0.36~0.39(mean 0.55). High $PM_{10}$ concentration occurred during higher air temperature, more solar radiation and sunshine, lower relative humidity, and smaller cloud amount. Synoptically, it also occurred when Busan was in the center or the edge of anticyclone and when sea breeze intruded. An analysis of upper air sounding showed that high $PM_{10}$ concentration occurred when surface inversion layer and upper subsidence inversion layer existed, and when boundary layer depth and vertical mixing coefficient were low. An analysis of backward trajectory of air mass showed that high $PM_{10}$ concentration was largely affected by long range transport considering that it occurs when air mass is intruded from China.

Preparation and Characterization of $BaTiO_3-CuFe_2O_4$ Bi-Layer Thin Films Prepared By Pulsed Laser Deposition

  • ;;;이희영
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2010년도 하계학술대회 논문집
    • /
    • pp.209-209
    • /
    • 2010
  • Multiferroic properties of $BaTiO_3-CuFe_2O_4$ thin films grown on highly-textured Pt(111)/$TiO_2/SiO_2$/Si(100) substrates were studied. $CuFe_2O_4$ ceramic target was synthesized by mixing oxide powders of CuO, $Fe_2O_03$, $BaTiO_3$ ceramic target was also prepared separately. The film structure was of bi-layer type, where $BaTiO_3$ layer lies underneath of $CuFe_2O_4$ layer, where both layers were grown by pulsed laser deposition technique. We will report the ferroelectric and magnetic properties of $BaTiO_3-CuFe_2O_4$ bi-layer films in some detail.

  • PDF