• Journal of the Korean association of regional geographers
• /
• v.13 no.4
• /
• pp.422-437
• /
• 2007

Dokdo has historical and political meaning in relation to the territorial problems with Japan. The area can be the main factor to explain the formation and development process of East-Sea as exposure volcanic island at East-Sea with Ulreong-island. Accordingly, it also has an important meaning of physical geography aspects In this research, it is perceived the geomorphological development process of slope due to the salt weathering which is considered as the most important factor to understand whole geomorphology of Dokdo. And researched how a geomorphology of this sort affects to animal and plants. The peculiar geomorphology is tafoni which is a weathering geomorphology and one of the remarkable geomorphology in preservation of Dokdo. Tafoni at west part of Dongdo is distributed intensively near shoreline which is composed tuff. The shape of tafoni is mainly massive, circle and oval in Massive tuff breccia layer also is formed toward horizontality bedding direction in Bedded lapilli tuff. Tafoni in Dokdo is constituted after middle of Holocene. This fact can be proved by ranging at surface of sea-cliff which is formed wave erosion after middle of Holocene sea-level reaching to present level. Tafoni is also the most contribute factor of geomorphology dissection of Dokdo as it is eroded the bed rock with salt weathering. In bottom part of tafoni it has an important function for habitat of birds. Herbaceous plants are on it. To procrastinate of bed rock dissection by growth of Tafoni, conservation of vegetation and soil are most important factor.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.5 no.6
• /
• pp.72-85
• /
• 2002

This study was conducted to investigate the germination rates and ground coverage rates of the 16 native wild flower, herbaceous, shrub and woody plants according to temperature and seeding timing for the revegetation and rehabilitation of the roadside slopes. Also, this study was conducted to suggest design criteria to select revegetation plants and to decide proper seed mixture for ecological restoration of the disturbed manmade slopes as a environmentally friendly construction. The results are summarized as follows. 1. Most of the plants germinated after 10~14 days. Woody plants germinated more slowly than wild flowers and herbaceous plants because of the hard seed. 2. Most of the plants showed the highest percentage of the germination rates under $15/25^{\circ}C$ temperature. The next was in order of under the $20/30^{\circ}C$ temperature, normal temperature(October) and $25/35^{\circ}C$ temperature. 3. At the chamber experiment, the Sorbaria sorbifolia var. stellipila showed the highest germination rates. Most of the native wild flowers germinated well and showed high germination rates under the various temperature. 4. As the field germination experiments, the seeding at August shows higher germination rates than that of the seeding at September, but showed lower surviving percentage of the germinated seedlings and lower ground coverage percentage than those of the seeding at September. After one year, Chionanthus retusus, Acer palmatum, Albizzia julibrissin are germinated and showed 10% coverage rates. So, they can be used as revegetation plants for the restoration works. 5. As seed mixture experiment, it was not effective only to increase the proportion of the ratio of the tree seeds, relatively high price, for making woody vegetation. It would be more successful to make vegetation structure by natural competition among wild flowers, shrubs and trees. 6. The excessive dominance of trees in revegetation works may destroy the lower layer of vegetation and it will be undesirable on the species diversity. It is more important to recover the species diversity of the plant community by seed mixture with the considering the germination, the growth characteristics and the correlation effect among revegetation plants. 7. To recover the manmade slopes quickly, increasing the ratio of the wild flower was recommended.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.10 no.4
• /
• pp.70-82
• /
• 2007

Aiming at nature's early restoring needs to select plant species harmonizing with surrounding environment that fits to restoring goal of ultimately aiming at woody plants dominant vegetation that protect and stabilize surface parts of bared slopes. And it is important to make it assimilated with surrounding natural vegetation by differentiating planning of seed mixtures. Natural Ecological Restoring Construction Methods (JSB Method) was developed to increase the effect of landscape change according to seasons not to simple hydro-seeding by reducing rate of foreign grasses while raising rate of wild flower using. It was considered that using wild flowers that bloom on each season solved the problems of slope landscapes that looks artificial and uninteresting. After researching environmental condition of the slopes, JSB Method has shown that, as of wet-type method, soil is relatively soft and the difference of thickness of plant base soil media affects on the difference of soil hardness. In case of soil hardness of 8.8~17mm, there's dangerousness of slope's collapsing, but it has shown that growth of plant was favorable. For the acidity of soil, most of them are in the type of neutralized soil of more than pH 6. And after analyzing the degree of woody plants dominance, it had shown that lower part was occupied with wild flowers and other herbaceous species like China pin, golden phesant mum, pitcher plant, and middle and upper part was occupied with woody plants like silk-tree, sumac forming multi-layer structure. It can be concluded that the restoration objects of the woody plant vegetation on the roadside slopes can be accomplished successfully by Natural Ecological Restoring Construction Method (JSB method).

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.2
• /
• pp.64-73
• /
• 1998

In twin spool aero-engine, there may be a S shaped annular duct between high pressure and low pressure spools. The flow passing this S shaped duct experiences the flow acceleration and deceleration due to the convex and concave surface of the duct as well as the increase of blockage according to the boundary layer growth along the surfaces. So, the high pressure compressor which is located behind the S shaped duct is influenced by the non-uniform flow field generated by the geometry of inlet duct. To study the influence of the S shaped duct on the centrifugal stage, performance tests were implemented for the compressor with straight cylindrical inlet duct and with S shaped inlet duct, respectively. The test results showed that the performance, such as pressure ratio and efficiency, of the compressor with S shaped duct was worse than that of the compressor with cylindrical duct. And the compressor with S shaped duct had reduced maximum flow rate around design speed. To investigate the cause of performance degradation, flow anlaysis was performed for the impeller in front of which is located S shaped annular duct. The result of CFD showed the strong acceleration of the flow in the axial direction around the inducer tip region which caused the increase of relative mach number and the decrease of incidence angle of the flow.

• Korean Journal of Environment and Ecology
• /
• v.19 no.3
• /
• pp.258-268
• /
• 2005

The objective of this study was to monitor the edge vegetation development process after timber harvesting at deciduous hardwood forest in Seoul National University Research Forest of Baekwoonsan (Mt), Korea The results from the 4th (2001) and 5th (2003) survey for edge vegetation development process after timber harvesting are summarized as follows. The competitive species at the harvested forest edge are Lindera erythrocarpa, Weigela subsessilis, Lespedeza maximowiczii, Lindera obtusiioba, Arajia eiata. There were Lindera erythrocarpa, Ivelgela subsessilis, Staphyiea bumaida as competitive species at harvested forest border between harvested forest edge and harvested interior. And at the forest interior, the competitive species were Lindera erythrocarpa, Lindera obtusiloba. There were differences in the competitive species at the forest edge due to the differences in direction, altitude, and existing dominant species. But Lindera erythrocarpa, Weigela subsessilis were appeared to be a competitive specieg at the southwestern slope (A site) and northeastern slope (B site). After timber harvesting, Sasa borealisshowed a good growth in early days, but showed a tendency of declining with the developing of canopy layer And coverage was generally higher at the Northeastern slope (Site B) than southwestern slop (Site A). The similarity index was lower as the distance from the forest edge becomes farther.

• Journal of Forest and Environmental Science
• /
• v.24 no.1
• /
• pp.35-39
• /
• 2008

The present study was conducted to analyze the soil environment of planted areas around Sudokwon Landfill Site, and drew conclusions as follows. Among the physical properties of soil, bulk density ranged between 1.11~1.59 $g{\cdot}cm^{-3}$, which was higher than the average bulk density (1.05 $g{\cdot}cm^{-3}$) of the B layer of forest soil in Gyeonggido, Korea. This is probably because of treading by heavy equipment used to prepare the ground for planting, and measures should be taken to improve bulk density for the growth of the root system of trees. Among the chemical properties of soils, the organic matter content was only 1/5~1/10 of 30 $g{\cdot}kg^{-1}$, the adequate level for landscape planting. In addition, cation exchange capacity (CEC) ranged between 1~3 $cmol{\cdot}kg^{-1}$, which was much lower than 6 $cmol{\cdot}kg^{-1}$, the least capacity for landscape planting. Therefore, these problems need to be solved.

• Korean Journal of Ichthyology
• /
• v.13 no.3
• /
• pp.166-172
• /
• 2001

Parental care of eggs of Chromis fumea (Tanaka) was observed by Skin Scuba gear in August 1995 off Cheju Island. The eggs and larval development were observed in the laboratory at Pukyong National University, Pusan. Eggs were deposited on a flat surface of hard substratum and formed a plain sheet of one layer of eggs. Males showed parental care of the eggs by hovering over the nest and attacking other fishes that approached the nest. The spawned eggs were transparent, elliptical in shape and measured 0.73~0.88 mm in long axis and 0.50~0.56 mm in short axis. An analysis by T-test of the long axis of the egg with time showed a significant difference (p<0.01). However, there was no significant difference in short axis with time. Eggs were reared at water temperatures of $23.0{\sim}25.5^{\circ}C$ and took about 4~5 days from embryonic body stage to hatching. The newly hatched larvae were 1.10~1.61 mm in notochord length (NL) had 21 myomeres, has closed mouth but open anus, preanus length was 45.8% of NL. Melanophores were distributed on the occipital region of head, the eye, the peritoneal region, and along the ventral contour. The larvae absorbed the yolk material and oil globule in 3~4 days after hatching and became postlarvae. On the third day after hatching, the larvae had attained 1.9~2.4 mm in NL, had 25 myomeres, and showed rapid growth. By the ninth day after hatching, the larvae had attained 2.9 mm in NL, had an swimbladder in the dorsal margin of ventral region, the preanus length was 37.9% of NL, and their melanophores were enlarged and reduced in number.

• Journal of Life Science
• /
• v.26 no.4
• /
• pp.453-459
• /
• 2016

Agarases are classified into α-agarase and β-agarase that produce agarooligosaccharides and neoagarooligosaccharides, respectively. Neoagarooligosaccharides have whitening effect of skin, delay of starch degradation, and inhibition of bacterial growth etc. Hence, the object of this study was to isolate a novel agarase producing marine bacterium and characterization of its β-agarase. A novel agar-degrading bacterium was isolated from seashore of Namhae at Gyeongnamprovine, Korea and purely cultured with Marine agar 2216 media. The isolated bacterium was identified as Simiduia sp. SH-4 after 16S rRNA gene sequencing. The enzymatic sample was obtained from culture media of Simiduia sp. SH-4. Enzymatic activity was highly increased from 20(30% relative activity) to 30℃ (100%) and decreased from 30 to 40℃(75%) and so more. Relative activity was 100% at pH 6 while those were about 91% and 59% at pH 5.0 and 7.0, respectively, meaning the enzyme possesses narrow optimal pH range. Hence, the enzyme exhibited the maximal activity with 120.4 units/l at pH 6.0 and 30℃ in 20 mM Tris-HCl buffer. Thin layer chromatography (TLC) analysis showed that Simiduia sp. SH-4 produces β-agarase, which hydrolyze agarose to produce biofunctional neoagarooligosaccharides such as neoagarotetraose and neoagarobiose. Hence, broad applications would be possible using Simiduia sp. SH-4 and its enzyme in the food industry, cosmetics and medical fields.

• Microbiology and Biotechnology Letters
• /
• v.44 no.2
• /
• pp.156-162
• /
• 2016

In this study, we isolated a new agar-degrading marine bacterium and characterized its agarase. An agardegrading marine bacterium SH-1 was isolated from seawater, collected from the seashore of Namhae in Gyeongnam province, Korea, and cultured in marine agar 2216 media. It was identified as Maribacter. sp. SH-1 by phylogenetic analyses, based on 16S rRNA gene sequence. The extracellular agarase was extracted from culture media of Maribacter sp. SH-1 and characterized. Its relative activities were 56, 62, 94, 100, and 8% at 20, 30, 40, 50, and 60℃, respectively, whereas 15, 100, 60, and 21% relative activities were observed at pH 5, 6, 7, and 8, respectively. Its extracellular agarase exhibited maximum activity (231 units/l) at pH 6.0 and 50℃, in 20 mM Tris-HCl buffer. Therefore, this agarase would be applicable as it showed the maximum activity at the temperature at which the agar is in a sol state. Furthermore, the agarase activities remained over 90% at 20, 30, and 40℃ after 0.5 h exposure at these temperatures. Thin layer chromatography analysis suggested that Maribacter sp. SH-1 produces extracellular β-agarase, as it hydrolyzes agarose to produce neoagarooligosaccharides, such as neoagarohexaose (34.8%), neoagarotetraose (52.2%), and neoagarobiose (13.0%). Maribacter sp. SH-1 and its β-agarase would be useful for the production of neoagarooligosaccharides, which shows functional properties, like skin moisturizing, skin whitening, inhibition of bacterial growth, and delay in starch degradation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.23-23
• /
• 2009

GaN-based nitride semiconductors have attracted considerable attention in high-brightness light-emitting-diodes (LEDs) and laser diodes (LDs) covering from green to ultraviolet spectral range. LED and LD heterostructures are usually grown on (0001)-$Al_2O_3$. The large lattice mismatch between $Al_2O_3$ substrates and the GaN layers leads to a high density of defects(dislocations and stacking faults). Moreover, Ga and N atoms are arranged along the polar [0001] crystallographic direction, which leads to spontaneous polarization. In addition, in the InGaN/GaN MQWs heterostructures, stress applied along the same axis can also give rise to piezoelectric polarization. The total polarization, which is the sum of spontaneous and piezoelectric polarizations, is aligned along the [0001] direction of the wurtzite heterostructures. The change in the total polarization across the heterolayers results in high interface charge densities and spatial separation of the electron and hole wave functions, redshifting the photoluminescence peak and decreasing the peak intensity. The effect of polarization charges in the GaN-based heterostructures can be eliminated by growing along the non-polar [$11\bar{2}0$] (a-axis) or [$1\bar{1}00$] (m-axis) orientation instead of thecommonly used polar [0001] (c-axis). For non-polar GaN growth on non-polar substrates, the GaN films have high density of planar defects (basal stacking fault BSFs, prismatic stacking fault PSFs), because the SFs are formed on the basal plane (c-plane) due to their low formation energy. A significant reduction in defect density was recently achieved by applying blocking layer such as SiN, AlN, and AlGaN in non-polar GaN. In this work, we were performed systematic studies of the defects in the nonpolar GaN by conventional and high-resolution transmission electron microscopy.