• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.105-105
• /
• 2012

We have developed a photoemission-assisted plasma-enhanced chemical vapor deposition (PAPE-CVD) [1,2], in which photoelectrons emitting from the substrate surface irradiated with UV light ($h{\nu}$=7.2 eV) from a Xe excimer lamp are utilized as a trigger for generating DC discharge plasma as depicted in Fig. 1. As a result, photoemission-assisted plasma can appear just above the substrate surface with a limited interval between the substrate and the electrode (~10 mm), enabling us to suppress effectively the unintended deposition of soot on the chamber walls, to increase the deposition rate, and to decrease drastically the electric power consumption. In case of the deposition of DLC gate insulator films for the top-gate graphene channel FET, plasma discharge power is reduced down to as low as 0.01W, giving rise to decrease significantly the plasma-induced damage on the graphene channel [3]. In addition, DLC thickness can be precisely controlled in an atomic scale and dielectric constant is also changed from low ${\kappa}$ for the passivation layer to high ${\kappa}$ for the gate insulator. On the other hand, negative electron affinity (NEA) of a hydrogen-terminated diamond surface is attractive and of practical importance for PAPECVD, because the diamond surface under PAPE-CVD with H2-diluted (about 1%) CH4 gas is exposed to a lot of hydrogen radicals and therefore can perform as a high-efficiency electron emitter due to NEA. In fact, we observed a large change of discharge current between with and without hydrogen termination. It is noted that photoelectrons are emitted from the SiO2 (350 nm)/Si interface with 7.2-eV UV light, making it possible to grow few-layer graphene on the thick SiO2 surface with no transition layer of amorphous carbon by means of PAPE-CVD without any metal catalyst.

• Journal of Internet Computing and Services
• /
• v.6 no.3
• /
• pp.55-70
• /
• 2005

In order to provide mobile hosts with multicast service in mobile communication environment, we proposed a multicast mechanism named HXcast++ which is an extended version of the existing Xcast++ with hierarchical architecture, We assured that mobile hosts could get multicast service through an optimal path regardless of their location by making DR(Designated Router) join a group on behalf of the mobile hosts, In this present research we introduced hierarchical architecture in order to reduce the maintenance cost resulting from frequent handoff. We also proposed a GMA (Group Management Agent) based group management mechanism which enables the mobile hosts to join the group without waiting for a new IGMP Membership Query. A fast handoff method with L2 Mobile Trigger was, in this work, employed in order to reduce the amount of the packet loss which occurs as a result of the handoff, We also managed to curtail the packet loss caused by the latency of the group join by using a buffering and forward mechanism.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.2
• /
• pp.48-54
• /
• 1999

We designed the optimal device parameters of the retrograde well and the gettering layer(buried layer) using the high energy ion implantation for the next generation of CMOS struoture and proposed two models and simulated these models with Athena and Atlas, Silvaco Co. We obtained trigger currents which is more than 600 ${\mu}A/{\mu}m$ when the structure has been combined the gettering layer and the retrograde well. And the second model(twin retrograde well) was obtained that holdingcurrents were over 2500${\mu}A/{\mu}m$. As results, the more heavier dose, the more improved the latch-up immunity. The n'-p' spacing was fixed a 2${\mu}m$ in both models.

• Current Research on Agriculture and Life Sciences
• /
• v.32 no.1
• /
• pp.34-42
• /
• 2014

Soy and fermented soy are popular and recognized as a health food among Koreans. Since soy proteins are known to be protease resistant, even to pepsin and pancreatin, it is hypothesized that soy proteins may interact with the intestinal tract and trigger certain physiological reactions. To test this hypothesis, mice were fed diets supplemented with soy, Chunkukjang, or casein. The differentially expressed proteins were analyzed using 2-D gels and identified by peptide mass fingerprinting using mass spectrometry. The majority of the differentially expressed proteins could be functionally grouped into metabolic enzymes and calcium-binding proteins. The differential protein expression by the soy-fed groups was also verified based on a representative protein, tropomyosin, using a Western blotting analysis. In addition, the soy-fed groups exhibited a taller villi structure. Therefore, this study suggests that soy proteins can be an effective nutrient and physiological stimulant for the intestines.

• ETRI Journal
• /
• v.35 no.2
• /
• pp.207-217
• /
• 2013

This paper introduces the modular cellular neural network (CNN), which is a new CNN structure constructed from nine one-layer modules with intercellular interactions between different modules. The new network is suitable for implementing many image processing operations. Inputting an image into the modules results in nine outputs. The topographic characteristic of the cell interactions allows the outputs to introduce new properties for image processing tasks. The stability of the system is proven and the performance is evaluated in several image processing applications. Experiment results on texture segmentation show the power of the proposed structure. The performance of the structure in a real edge detection application using the Berkeley dataset BSDS300 is also evaluated.

• BMB Reports
• /
• v.54 no.8
• /
• pp.425-430
• /
• 2021

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) induces coronavirus disease 2019 (COVID-19) and may increase the risk of adverse outcomes in lung cancer patients. In this study, we investigated the expression and function of mucin 1 (MUC1) after SARS-CoV-2 infection in the lung epithelial cancer cell line Calu-3. MUC1 is a major constituent of the mucus layer in the respiratory tract and contributes to pathogen defense. SARS-CoV-2 infection induced MUC1 C-terminal subunit (MUC1-C) expression in a STAT3 activation-dependent manner. Inhibition of MUC1-C signaling increased apoptosis-related protein levels and reduced proliferation-related protein levels; however, SARS-CoV-2 replication was not affected. Together, these results suggest that increased MUC1-C expression in response to SARS-CoV-2 infection may trigger the growth of lung cancer cells, and COVID-19 may be a risk factor for lung cancer patients.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.10B
• /
• pp.630-637
• /
• 2007

In this paper, we propose an effective handoff mechanism using events at the layer 2 and a tunnel-based mechanism that is performed by sharing information of a mobile node and anticipated-based handoff. Also, we propose a novel anticipated-reservation mechanism using the events triggered at layer 2 to make easy a resource reservation procedure. Comparing with the existing mobile IPv6 handoff mechanism, our proposed handoff mechanism can reduce an amount of handoff latency and traffic volume between access routers where handoff is performed. In the anticipated-reservation mechanism, the amount of signaling traffics between an mobile node and the correspondent nodes can be reduced and then the allocation of resource can be accomplished. We present the performance of our proposed handoff mechanism in the wireless network environment by ns-2 simulation. Although the anticipated-reservation mechanism including a proxy agent is explained without performance evaluation, we can validate the operation of our proposed model only by the procedure of message flow.

• Journal of the Microelectronics and Packaging Society
• /
• v.9 no.4
• /
• pp.1-9
• /
• 2002

The metallurgical reaction properties between the pad consisted of 0.5 $\mu\textrm{m}$Au/5 $\mu\textrm{m}$Ni/Cu layers on a conventional ball grid array (BGA) substrate and In-15 (wt.%)Pb-5Ag solder ball were characterized during the reflow process and solid aging. During the reflow process of 1 to 5 minutes, it was observed that thin $AuIn_2$ or Ni-In intermetallic layer was formed at the interface of solder/pad. The dissolution rate of the Au layer into the molten solder was about $2\times 10^{-3}$ $\mu\textrm{m}$/sec which is remarkably low in comparison with a eutectic Sn-37Pb solder. After solid aging treatment for 500 hrs at $130^{\circ}C$, the thickness of $Ni_{28}In_{72}$ intermetallic layer was increased to about 3 $\mu\textrm{m}$ in all the conditions nevertheless the initial reflow time was different. These result show that In atoms in the solder alloy were diffused through the $AuIn_2$ phase to react with underlaying Ni layer during solid aging treatment. From the microstructural observation and shear tests, the reaction properties between In-15Pb-5Ag alloy and Au/Ni surface finish were analyzed not to trigger Au-embrittlement in the solder joints unlike Sn-37Pb composition.

• Journal of KIISE:Information Networking
• /
• v.35 no.2
• /
• pp.99-111
• /
• 2008

In recent years, the needs for WLANs(Wireless Local Area Networks) technology which can access to Internet anywhere have been dramatically increased particularly in SOHO(Small Office Home Office) and Hot Spot. However, unlike wired networks, there are some unique characteristics of wireless networks. These characteristics include the burst packet losses due to unreliable wireless channel. Note that burst packet losses, which occur when the distance between the wireless station and the AP(Access Point) increase or when obstacles move temporarily between the station and AP, are very frequent in 802.11 networks. Conversely, due to burst packet losses, the performance of 802.11 networks are not always as sufficient as the current application require, particularly when they use TCP at the transport layer. The high packet loss rate over wireless links can trigger unnecessary execution of TCP congestion control algorithm, resulting in performance degradation. In order to overcome the limitations of WLANs environment, MAC-layer LDA(Loss Differentiation Algorithm)has been proposed. MAC-layer LDA prevents TCP's timeout by increasing CRD(Consecutive Retry Duration) higher than burst packet loss duration. However, in the wireless channel with high packet loss rate, MAC-layer LDA does not work well because of two reason: (a) If the CRD is lower than burst packet loss duration due to the limited increase of retry limit, end-to-end performance is degraded. (b) energy of mobile device and bandwidth utilization in the wireless link are wasted unnecessarily by Reducing the drainage speed of the network buffer due to the increase of CRD. In this paper, we propose a new retransmission module based on Cross-layer approach, called BLD(Burst Loss Detection) module, to solve the limitation of previous link layer retransmission schemes. BLD module's algorithm is retransmission mechanism at IEEE 802.11 networks and performs retransmission based on the interaction between retransmission mechanisms of the MAC layer and TCP. From the simulation by using ns-2(Network Simulator), we could see more improved TCP throughput and energy efficiency with the proposed scheme than previous mechanisms.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.12
• /
• pp.45-51
• /
• 2010

The main issue in mobile cloud computing is how to support a seamless service to a mobile mode. Mobile IPv6 (MIPv6) is a mobility supporting protocol which is standardized by the Internet Engineering Task Force (IETF). Mobile IPv6 fast handovers (FMIPv6) is the extension of MIPv6 which is proposed to overcome shortcomings of MIPv6. Recently, fast handovers for Mobile IPv6 over IEEE 802.16e which is one of broadband wireless access systems has been proposed by the IETF. It was designed for supporting cross-layer fast handover. In this paper, we propose an enhanced cross-layering mobile IPv6 fast handover over IEEE 802.16e networks. In our scheme, a new access router generates a new address for the mobile node by using a layer 2 trigger. We utilize a layer 2 message which is sent from a new base station to the new access router in order to inform the new access router of information of the mobile node. A previous access router sends a binding update message to the mobile node's home agent when it acquires the new address of the mobile node. We evaluate the performance of the proposed scheme compared with the existing schemes in terms of the signaling cost and the handover latency. From the results, we observe that the proposed scheme can support fast handover effectively over IEEE 802.16e networks than existing schemes.