• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2003.10a
• /
• pp.351-354
• /
• 2003

This study was carried out to set up design criteria of Eryngii cultivation houses. Optimization of lay-out efficiency together with analysis of structural safety were two main tools of approaching toward reasonable models to be developed. Some models tentatively assumed according to the result of field survey and analysis were compared in the aspect of structural safety as well as energy efficiency.

• Journal of the Korean Institute of Rural Architecture
• /
• v.21 no.2
• /
• pp.19-26
• /
• 2019

Pungsu theory is important one in the site selection and lay-out of traditional Korean village and house. In this aspect, Study with a view of Pungsu theory might be used as a proper method for understanding the traditional architecture in Korea. In this context, this study analyzes the Jeong, Dong-Ho's house which is designated no. 19 as an important folk cultural heritage, located in Jigok Ochu-gil 133-62, Godeok-myon, Yesan-gun, Chungnam province. The analysis of the site and space lay-out is carried out by Yong(Dragon), Hyoel(Auspicious Spot), Sa(Sands), Su(Water) aspects of the Pungsu(Fengshui) Hyungsei-ron. The house is depending upon soft dragon vein connecting with a earth type rear mountain. It looks southeast direction, Gonjwasonhyang(乾坐巽向). The hyeolseong(穴星) has classical venus shape, and there is no faults relatively. The Sasinsa condition is almost perfect that right blue dragon and left white tiger surround the hyeol with 3-4 layers and the facing mountain covers the front open area. The water flowing from inside of left and right mountain is joined in front of the house so it could stop flowing out of vital energy. Bibo forest(裨補樹) is placed properly to protect the easy disclose of water outlet. The house is well organized western house(西四宅) by analysis of Dongseosataek-ron(東西四宅論). Through the analysis, I found that the house has good Pungsu(Fengshui) environment fitted with Pungsu Hyungsei-ron. The house composed of small thatched roof is enclosed several times by low hills of back, left and right side. So it is believed that the site might be carefully evaluated by Yong, Hyoel, Sa, Su of Hyeongsei-ron for knowing whether the site condition could minimize the demage by strong winds and protect from the winter cold wind and secure water for drinking and farming and then selected. The method of Pungsu for evaluating the geographical condition of surrounding of a site is used as a traditional site analysis method for evaluating the suitability of long-term well and safe residence.

• Journal of Science and Technology Studies
• /
• v.16 no.2
• /
• pp.99-147
• /
• 2016

This paper critically reviews the previous discussion over public engagement with science and technology by Science and Technology Studies literatures with a focus on justification and acceptance. Recent studies pointed out that the "participatory turn" after the late 1990s was followed by confusion and disagreement over the meaning and agency of public engagement. Their discussion over the reproduction of the ever-present boundary between science and society along with so-called late modernity and post-normal science and sometimes through the very processes of public engagement draws fresh attention to the old problem: how can lay participation in decision-making be justified, even if we agree that privileging the position of experts in governance of science and technology is no longer justified? So far STS have focused on two conditions for participatory turn-1) uncertainties inherent in experts' ways of knowing and 2) practicability of lay knowledge. This paper first explicated why such discussion has not been logically sufficient nor successful in promoting a wide and well-thought-out acceptance of public engagement. Then the paper made a preliminary attempt to explain what new types of expertise can support the construction and sustainment of participatory governance in science and technology by focusing on one case of lay participation. The particular case discussed by the paper revolves around the actions of a civil organization and an activist who led legal and regulatory changes in wind power development in Jeju Special Self-governing Province. The paper analyzed the types of expertise constructed to be effective and legitimate during the constitution of participatory energy governance and the local society's support for it. The arguments of this paper can be summarized as follows. First, an appropriate basis of the normative claim that science and technology governance should make participatory turn cannot be drawn from the essential characteristics of lay publics-as little as of experts. Second, the type of 'expertise' which can justify participatory governance can only be constructed a posteriori as a result of the practices to re-construct the boundaries between factual statements and value judgment. Third, an intermediary expertise, which this paper defines as a type of expertise in forming human-nonhuman associations and their new pathways for circulations, made significant contribution in laying out the legal and regulatory foundation for revenue sharing in Jeju wind power development. Fourth, experts' conventional ways of knowing need to be supplemented, not supplanted, by lay expertise. Ultimately, the paper calls for the necessity to extend STS discussion over governance toward following the actors. What needs more thorough analysis is such actors' narratives and practices to re-construct the boundaries between the past and present, facts and values, science and society. STS needs a renewed focus on the actual sites of conflicts and decision-making in discussing participatory governance.

• International Journal of Concrete Structures and Materials
• /
• v.11 no.1
• /
• pp.69-84
• /
• 2017

This paper presents results of an experimental investigation on the behaviour of bond between external glass fibre reinforced polymer reinforcement and concrete exposed to three different environmental conditions, namely, temperature cycles, wet-dry cycles and outdoor environment separately for extended durations. Single shear tests (pull-out test) were conducted to investigate bond strengths (pull-out strengths) of control (unexposed) and exposed specimens. Effect of the exposure conditions on the compressive strength of concrete were also investigated separately to understand the effect of changing concrete compressive strength on the pull-out strength. Based on the comparison of experimental results of exposed specimens to control specimens in terms of bond strengths, failure modes and strain profiles, the most significant degradation of pull-out strength was observed in specimens exposed to outdoor environment, whereas temperature cycles did not cause any deterioration of strength.

• Journal of Christian Education in Korea
• /
• v.72
• /
• pp.225-244
• /
• 2022

The purpose of this study is to study the experiences of online service during the COVID-19 and to find out Korean Christians' perception. To this end, this study examines the differences in online service content, interactions with pastors and lay people through online service, online service environment, and online service satisfaction. A survey was conducted for 176 Korean Christians over the age of 18 living in the metropolitan area. As a result, according to the size of the church attending, the period of faith, and the position, there was a difference between groups in the online service contents, interactions with pastors and lay people through online service, online service environment, and online service satisfaction. The factors influencing the satisfaction of online service were the interaction with the lay people, the online service environment, and the online service content in that order. Based on the results of this study, a discussion on the improvement of online service satisfaction and a suggestion for further research are presented.

• Archives of design research
• /
• v.11 no.2
• /
• pp.215-226
• /
• 1998

As late as middle of 1980s, what was referred to as new model cars consisted, on the premise of a standardized packaging layout, principally of the endeavor to transform their style images by changing little by little the form of layouts almosts similar to or with larger bodies than those of the old model ones. Afterwards even in the period of competition of engeineering and mechanical body styles for reducing fuel cost and improving comfortability in riding, the standardized packaging layout did not change visibly, simply trying to ameliorating commercialism through high output and high efficacy on the engineering part. Today the sudden prevalent motorization in every walk of life has brought about the development of the car industry, thus producing surplus supply and technical standardization. This phenomenon of technical standardization leads the concept of the renovation of car design to a way quite different from that of the past and so may be said to be confronted with an era that requires genuine-sense car design in a way. It seems that interior design plans are of much more importance than external shapes. This is because the effort for enhancing comfortability to keep car passengers' needs of transportation is one of the essences of car design. The objective of this study consists in inquiring into how to plan motorcar interior design, an essential prerequisite in determining the external or of a car, obtaining data needed via analysis of interior design plans of the car models that have won favorable criticism from consumers, thus contributing to the use of the data obtained for reference in car design activities in a genuine sense.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1754-1759
• /
• 2008

To produce plastic parts that have fine pattern through conventional injection molding, a lot of difficulties follow. Therefore, rapid heating and cooling methods are good candidates for manufacturing injection-molded parts with micro/nano patterns. In this study, we adopted the E-Mold patent technology. The mold for E-Mold technology has a separate heated core with micro heaters. It is very important to optimize the lay-out of the heaters in heated core because it influences both control and distribution of mold temperature. We developed a optimization method of heating line lay-out by using commercial softwares and compared the output with the experimental results. We used Pro-Engineer Wildfire 2.0 for the mold design, ICEMCFD for mesh generation, and FLUENT for heat transfer simulation. The simulation results showed the temperature profile from $60^{\circ}C$ to $120^{\circ}C$ or $180^{\circ}C$ during heating and cooling process which were compared with the injection molding experiments. We concluded that the simulation could well explain the experimental results. It was shown that the E-Mold optimization design for heater lay-out could be available through the simulation.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.2
• /
• pp.142-150
• /
• 2001

Due to naturally formed copper oxides, the adhesion strength between copper and epoxy resin is often very poor. To improve the adhesion strength between copper and epoxy resin, Cu-based leadframe sheets were oxidized in a brown-oxide forming solution. Then the effect of brown-oxide formation on the adhesion strength of leadframe to epoxy molding compound (EMC) was studied using pull-out specimens. After the pull-out test, fracture surfaces were analyzed using SEM, AES and EDS to determine failure path. The results showed that the failure path lay over inside the CuO and inside the EMC irrespective of the pull strength.

• Journal of the Korean housing association
• /
• v.12 no.4
• /
• pp.1-8
• /
• 2001

The purpose of this study is to clarify the change of the Korean public Apartment Project especially in the field of lay-out and site planning of apartment complex. the chronological study is about the change in the location of apartment, its area, its density, the construction of its open space. As a result, the analysis of this researching process of them has shown us the following important factors in the change of the Korean public Apartment Project.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.11a
• /
• pp.267-270
• /
• 2003

The quality assurance activities are important to obtain the safety and reliability in decommissioning of research reactor. It is essential to establish and implement effective quality assurance program. Foreign state-of-the-art standards and practices of quality assurance are investigated and analyzed to select quality assurance requirements. In this paper, guidelines are offered a suggestion to establish optimal the technology standard and lay out the managerial control scheme of quality assurance for decommissioning on research reactor.