• 제목/요약/키워드: Launching area

검색결과 65건 처리시간 0.025초

Analytical Approach of Sliding Installation Method with Spar Structure

  • Lee, Jong-Hyun
    • 한국항해항만학회지
    • /
    • 제35권7호
    • /
    • pp.575-580
    • /
    • 2011
  • It is important to understand the trajectory of structure in launching process because of the short time of launching process may result in unexpected accidents or damage to structures. The high risk of structural failure is not avoidable without the fully comprehension of changing forces in launching procedure. The commercial software can evaluate the motion of launching event in calm water condition but there is the limitation of research application because of the programmed commercial software. The launching process of the spar hull is suggested with stage concept that is divided into 10 stages in time domain. A force equilibrium diagram is derived for each stage where the changes of force vector and motion characteristics take place. In particular, the effects of changes in buoyancy and drag force due to the progressive submergence of the spar hull are taken into account by means of a touch length concept. The results contained in this paper provide the valuable information of the trajectory motion evaluation with suggested methods in spar launching process with sliding barge. Furthermore, the presented stage concept and touch length concept will provide basic knowledge for understanding launching process and help to develop further research area for launching analysis.

전파추적기법을 이용한 마이크로셀 도심지 환경에서의 전파특성에 관한 연구 (The Propagation Characteristics using Ray tracing in Urban area)

  • 김희중;김관홍박병성박한규
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1998년도 하계종합학술대회논문집
    • /
    • pp.177-180
    • /
    • 1998
  • In high frequency environment such as microcell, it is requried to adopt a new method different from the empirical channel modeling applied in macrocell. In this thesis, measurement for residential area in Sinrimdong and the result of the simulation are compared and analyzed. Simulation technique utilizes 3D ray launching method to consider some factors which were not included in the ray tracing method. Propagation environment in the urban area shows the typical channel characterisitics of the propagation environment. Using 3D ray launching method, pathloss of the wave and delay characteristics of the signal with respect to the height of the transmitter is researched. If the transmitter is located on the top of the building, radiowave experiences diffraction on the rooftop and it influences the total received signal strength.

  • PDF

유도탄의 초기 구속력이 발사안정에 미치는 영향 (The Effect on Launching Stability Due to the Initial Missile Detent Force)

  • 심우전;임범수;이우진
    • 한국정밀공학회지
    • /
    • 제14권4호
    • /
    • pp.22-29
    • /
    • 1997
  • This paper presents results on dynamic analysis of the missile initial motion arising from the missile detent force. Using ADAMS (Automatic Dynamic Analysis of Mechanical Syatem) software, a non- linear46-DOF (Degree of Freedom) model is developed for the launcher system including missile and lunch tube contact problem. From the dynamic analysis, it is found that initial angular velocity of the missile incre- ases when the missile detent force increases and also when rocket exhaust plume is taken into account. To achieve the missile launching stability, it needs to reduce the missile initial detent force and exhaust plume area of the lancher. Results of the dynamic analysis on the system natural frequency agree well with those obtained from experimental modal tests. The overall results suggest that the proposed method is a useful tool for prediction of initial missile stability as well as design of the missile launcher system.

  • PDF

발사시 초기 구속력이 유도탄 발사안정에 미치는 영향 (The Effect on the Launching Stability due to the Initial Missile Detent Force)

  • 심우전;임범수
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1996년도 추계학술대회 논문집
    • /
    • pp.1017-1022
    • /
    • 1996
  • This paper presents results of dynamic analysis of the missile initial motion arising from the missile detent force. Using ADAMS (Automatic Dynamic Analysis of Mechanical System) software, a non-linear 46-DOF (Degree of Freedom) model is developed for the launcher system including missile and launch tube contact problem. From the dynamic analysis, it is found that initial angular velocity of the missile increases when the missile detent force increases (more than 18 g) and also rocket exhaust plume is taken into account. To achieve the missile launching s ability, it needs to reduce the missile initial detent force and exhaust plume area of the launcher. Results of the dynamic analysis on the system natural frequency agree well with those obtained from experimental modal tests. The overall results suggest that the proposed method is a useful tool for prediction of initial missile stability as well as d :sign of the missile launcher system.

  • PDF

도약적 국가 우주력 발전을 선도할 제2 우주센터 구축 필요성 연구 (Research on the Necessity of Building the Second Space Rocket Launching Sites for Breakthrough Development of R.O.K National Space Power)

  • 박기태
    • 우주기술과 응용
    • /
    • 제2권2호
    • /
    • pp.146-168
    • /
    • 2022
  • 미·중간 패권경쟁과 최근 미·러간 동유럽(우크라이나)에서의 군사적 경쟁에서 증명한 것처럼, 대부분의 안보 전문가들은 21세기 미국의 가장 큰 안보위협은 강대국간 경쟁의 복원이라고 평가하고 있다. 상기 강대국간 패권경쟁의 핵심수단은 군사력이며, 이러한 군사력 운용의 효율과 효과성을 극대화하는 수단은 단연 우주력(space power)이다. 이를 반영하듯 최근 미국과 중·러간 우주패권경쟁이 전(全) 분야로 확대되고 있다. 상기한 전략환경하에서 우리나라도 우주에서의 국익을 보호하고 국민의 생명과 재산을 보호하기 위해 도약적인 국가 우주력 발전이 필요하다. 우리나라는 2021년 6월 한·미 미사일 지침 해제 및 한국의 '아르테미스' 프로젝트 참가 결정을 계기로 도약적 우주력 발전을 위한 계기가 마련되었다. 반면, 한반도의 지정학적 위치의 제한으로 현(現) '나로' 우주센터에서 우주 발사체를 활용하여 우주자산을 궤도에 올려놓는 것은 많은 제한사항이 존재한다. 발사방향 제한, 충분한 안전공간확보 불가 및 지원시설 구축 제한 등 선진국 우주센터와 비교해 많은 제한사항이 존재한다. 본고에서는 현(現) '나로' 우주센터 입지조건을 선진국 우주센터와 비교하고 제한사항을 식별하고, 이를 상쇄할 수 있는 국내 후보지를 제시하는 데 있다.

국내외 안전수칙 규정을 통한 한국형 아마추어 로켓 안전수칙 규정 연구 (The Study on Korean Safety Rules of Amateur Rocket through Safety Rules of Inside and Outside of Korea)

  • 심주현;방재원;임승빈;채재우
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2006년도 제26회 춘계학술대회논문집
    • /
    • pp.398-404
    • /
    • 2006
  • 외나로도 우주센터 건설과 한국 최초 우주인 선발 등으로 항공 우주, 나아가 로켓에 대한 관심이 높아져 가고 있다. 하지만 우리나라의 경우 아마추어로켓이 발달한 미국과 달리 로켓 제작, 발사 등에 관련된 공식적인 아마추어로켓 안전규정이 없는 실정이다. 아마추어로켓에 대한 대중화가 진행되고 있는 추세에 발맞추기 위해서는 우리도 우리나라의 실정에 적합하면서 통합된 안전 규정이 절실히 요구되는 바이다. 본 논문에서는 인하로케트연구회(Inha Rocket Research Institute, IRRI), 전국대학교로켓 연합회(The national Universities' Rocket Association, N.U.R.A.)와 미국로켓협회(NAR)와 미국취미산업협회(HIAA)의 기존 규정을 분석한 후 설계, 제작, 발사, 회수에 걸쳐서 좀 더 합리적 근거를 통해서 기존 규정의 수정 및 보완 할 점에 대해서 논의하였다.

  • PDF

방파제용 대형 케이슨 제작/진수에 따른 부양식 독의 안정성 해석 (Stability Evaluation of Floating Dock during Construction and Launching of Caisson for Breakwater)

  • 석준;박종천;정세민;김성용;강헌용;;강윤구
    • 한국해양공학회지
    • /
    • 제27권6호
    • /
    • pp.43-55
    • /
    • 2013
  • In general, huge caissons for breakwaters have been constructed on land or a floating dock. In the case of the construction on a floating dock, a 4 step installation procedure is involved: i) construction on a floating dock, ii) transportation by the floating dock to an area near the target sea, iii) launching from the floating dock, and iv) transference by tug-boats to the installation site. It is especially important to pay attention to the dynamic stability of the floating dock against the conditions in the sea during steps i) and iii). In this paper, the static and dynamic stabilities of a caisson on a floating dock are evaluated based on IMO rules during the construction and launching of the caisson on a floating dock by using independent commercial S/Ws such as NAPA, WAMIT, and CHARM3D.

중국 패션시장의 성공적 진입을 위한 한.중 스트리트 패션스타일 비교.분석 - 서울시와 대련시의 비교를 중심으로 - (A Comparative Analysis of Street Fashion Styles in Korea and China, For Successful Launching into Chinese Fashion Market - Focusing on the Seoul and Dalian -)

  • 배수정;오현아
    • 패션비즈니스
    • /
    • 제13권4호
    • /
    • pp.1-20
    • /
    • 2009
  • The main investigation of this thesis is about the comparative analysis of the fashion style preferences in the ages of 20-30 women, according to the style, by researching the area of Dalian and Seoul, represented as outstanding fashion cities in north eastern area. Both taking pictures and recording camcoders were performed at the famous fashion street in Seoul and Dalian. The period of investigation was from 24th of July to 2nd of August 2008. The result of research are as follows. Generally, the casual style was predominant in both area. The jean casual in Seoul was somewhat tidy and conservative, while that in Dalian showed the tendency of boldly exposed their body. In terms of easy casual, T-shirts and mini-tight skirt were preferred in Seoul, while T-shirts and midi-flare skirt was popular in Dalian. In Seoul, the blouse and mini skirt were in vogue, while one-piece dress, blouse and 5/7/9 length pants were prevalent in Dalian, in case of romantic style. The sports casual was relatively low in frequency in both areas, however, it was relatively more popular in Dalian than in Seoul. The frequency of classic style was similar in both areas. The T-shirts/blouse and Chanel-line skirt were preferred in Seoul, while the combination of jacket/shirts and full-length straight pants were preferred in Dalian. The one-piece dress was predominant in feminine style, the combination of mini one-piece dress and shoulder bag prevalent in Seoul, while the combination of Chanel-line one-piece dress designed as boldly exposed body was popular in Dalian, which shows the tendency of sexy, feminine style. The clear contrast or differences of street styles in Seoul and Dalian would become evident by this research. The continuous investigations into the various regions of China would be expected as an important measure for the successful launching into the Chinese fashion market.

케이슨식 교량기초 제작 및 거치 시공사례 -울산 신항 방파제현장 시공 사례를 중심으로- (A Case Study of Caisson Typed Bridge-Foundation Fabrication and Installation in Ul-san Newport Breakwater Project)

  • 장병수;신성권;김덕호
    • 한국해양공학회:학술대회논문집
    • /
    • 한국해양공학회 2004년도 학술대회지
    • /
    • pp.45-50
    • /
    • 2004
  • The method of caisson typed bridge-foundation fabrication and installation applied in Ul-san newport breakwater project is throughly carried out to compact QRR mound vibro-hammer step by step to minimize settlement through stability check. Floating Dock was mobilized for caisson fabrication due to limited site area. fabricated caisson on the Floating Dock was towed to the deeper area of 8m water depth to be launched, and Floating Crane assisted launching and installation work of the caisson. finally water filling was done followed by surveying work to permanent installation.

  • PDF

발사형 정찰로봇을 위한 파단형 보호체 개발 (Development of Fracture-Type Protector for a Launching Reconnaissance Robot)

  • 강봉수;조윤호;최정남
    • 대한기계학회논문집A
    • /
    • 제36권11호
    • /
    • pp.1473-1478
    • /
    • 2012
  • 본 논문은 원거리에 떨어진 작전지역으로 정찰로봇을 발사하여 투하하기 위해서 필요한 파단형 보호체에 대한 개발내용을 제시한다. 실제 전장에서의 활용성을 높이기 위해 기존 외피 전개를 위한 기구사용을 배제하고 체결부의 파단에 의해서 보호체의 외피가 개방되는 방식을 채택하여 소형, 경량을 이루었다. 보호체와 정찰로봇의 유한요소 모델링을 통해서 주어진 하중조건에 맞추어 체결부의 파단이 이루어지는지 전산모의실험을 수행하였으며, 낙하시험기를 이용한 충격실험을 통해서 충돌에 대한 보호체의 충격흡수성능을 분석하였다. 실제 외부환경에서의 100m 발사시험을 통해서 제안된 보호체가 정찰로봇을 탑재하여 정해진 지점으로 비행 도착한 후 안전하게 정찰로봇을 이탈시킴을 확인하였다.