• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1526-1531
• /
• 2008

The objective of this study is to evaluate the loading capacity of lattice girder according to loading position. 3-point flexible strength tests were performed on three types of lattice girder, such as LG-$50{\times}20{\times}30$, LG-$70{\times}20{\times}30$, and LG-$95{\times}22{\times}32$, mainly used in Korea. Two types of loading position for each flexible strength test were used to analyze the behavior of load-deformation. In 3-point flexible strength test, the difference of the average of maximum flexible strength according to loading position had the range from 10% to 33%.

• Structural Engineering and Mechanics
• /
• v.31 no.2
• /
• pp.153-162
• /
• 2009

The reduction of the dynamic response of an offshore structure subjected to wind-generated random ocean waves is of extreme significance in the aspects of serviceability, fatigue life and safety of the structure. In this study, a new neuro-control scheme is applied to the vibration control of a fixed offshore platform under random wave loads to examine the applicability of the proposed method. It is called the Lattice Probabilistic Neural Network (LPNN), as it utilizes lattice pattern of state vectors as the training data of PNN. When control results of the LPNN are compared with those of the NN and PNN, LPNN showed better performance in effectively suppressing the structural responses in a shorter computational time.

• Bulletin of the Korean Chemical Society
• /
• v.5 no.2
• /
• pp.61-64
• /
• 1984

The molecular orbital calculations for solid HF are performed by using the pseudolattice method considering the coulomb lattice sum. In order to obtain the reliable net atomic charges and lattice energy of one dimensional chains, the limited counting of interactions terms up to second neighbours for zig-zag chain and third neighbours for linear chain are sufficient in this calculation. In three dimensional solid HF, the contribution of interaction energy between non-hydrogen bonded neighbours to lattice energy is about 3.5% and the lattice energy of nonpolar structure is stablized by 2.05 kcal/mole compared with that of polar structure. And, this method is further tested and compared with the other methods.

• Journal of Mechanical Science and Technology
• /
• v.20 no.12
• /
• pp.2043-2051
• /
• 2006

This paper considered identification of vibration characteristics of flexible structure with vector channel periodic lattice filter. We present an algorithm for AR coefficients for the vector-channel lattice filters, and characteristic equation and transfer function are derived from these coefficients. Vibration lattice filter is then constructed from the vector channel lattice filter, and performance of this vibration filter is tested with a test signal which is a combination of many sine waves to compare the performance of scalar and vector channel lattice. Also it is applied to the cantilever data to identify properties of the system, such as natural frequencies and damping ratios, to show its performance.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2090-2092
• /
• 2003

Adaptive algorithms are widely used for various applications. One challenging application is an echo canceller in the long distance telephony network. This paper proposes the new variable step-size algorithm for adaptive lattice structure for echo cancellation. The new algorithm is using power of the output signal and the error signal to controlled the step of adaptation process. By this technique, the proposed algorithm is an excellent and effective in good stability. Performance comparison of the proposed algorithm and the other algorithm is made through simulation results.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.12
• /
• pp.31-44
• /
• 1996

Since optical delay line signal processing which utilizes optical fiber as delay line elements can provide high speed and broadband signal processing, the optical delay line signal processing has numerous applications. Recently, many research papers which optical delay line signal processing techniques are being applied to OCDMA are published. The author has published paper on the design method for optical fiber filters of lattice structure. However, the previous design method does not realize the transfer function all the time. It can be realized with constraints. In this paper, we propose the design method that can realize the transfer function all the time without any constraints for the optical fiber filter of lattice structure.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.5
• /
• pp.34-42
• /
• 1993

Due to the low loss, broadband and accurate short time delay properties of optical fiber, it has attracted as a delay medium for high speed and broad-band signal processing. In this paper, we consider the coherent optical fiber filter of lattice structure, which uses coherent light sources and consists of directional couplers and optical fiber delay elements.The differences between the optical fiber filter and the ordinary digital filter are 1) the coupling coefficients of directional couplers are restricted between 0 and 1. 2) the optical signal is divided into ${j\sqrt{a}}and\;{j\sqrt{1-a}}$ at the directional coupler. Considering these restrictions, the design formulae and condition of realibility for optical fiber filter of lattice structure which makes the optimal use of optical signal energy are derived.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.157-161
• /
• 2000

Blue phosphor of Ba-Mg-Al-O:Eu$^{2+}$ phase was fabricated by conventional firing techniques under reducing atmosphere and its photoluminescence properties are studied with varying Eu concentration and phost-annealing temperature under air atmosphere. This phosphors were well crystallized with particle size in the range of 3~5um and emitted a blue light at a dominent wavelength 450nm for 254nm UV irradiation. The concentration quenching wit Eu$^{2+}$ was that with increasing Eu concentration the energy transfer between the activator ions steadily improves, so that the excitation energy is transported over larger distances through the lattice before luminescence can occur. Thermal quenching also occurred in this phosphor means that in a host lattice with the $\beta$-alumina structure the bond of an Eu$^{2+}$ ion with the nearest-neighbour oxygen ion is much stronger than in a lattice with the magnetoplumbite structure.cture.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.9
• /
• pp.67-75
• /
• 2012

Optimal quantizers in conducting the entropy-constrained quantization for high bit rates have the lattice structure. The quantization process is simple due to the regular structure, and various quantization algorithms are proposed depending on the lattice. Such a lattice vector quantizer (VQ) can be implemented by using the sample-adaptive product quantizer (SAPQ) and its output can also be easily entropy encoded. In this paper, the entropy encoding scheme for the lattice VQ is proposed based on SAPQ, and the performance of the proposed lattice VQ, which is based on SAPQ with the entropy coder, is asymptotically compared as the rate increases. It is shown by experiment that the gain for the memoryless Gaussian source also approaches the theoretic gain for the uniform density case.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.3
• /
• pp.12-18
• /
• 2012

The Lattice Boltzmann Method has developed for solving the Boltzmann equation in Cartesian domains containing immersed boundaries of arbitrary geometrical complexity moving with prescribed kinematics. When a immersed boundaries are sweeping the fixed fluid node, refilling the node information in a vicinity of fluid nodes is one of the important issues in Lattice Boltzmann Method. In this study, we propose a simple refill algorithm for the particle distribution function based on a proper velocity, density and strain rate to enhance accuracy and stability of the method. The refill scheme based on a asymptotic analysis of LBGK model has improved accuracy than interpolation schemes. The proposed scheme in this study is validated by the simulations of an impulsively started rotating circular cylinder to investigate adaptability for fluid-structure interaction (FSI) problem. This refill scheme has improved stability and accuracy especially at high Reynolds number region.