• Wind and Structures
• /
• 제30권1호
• /
• pp.29-35
• /
• 2020

This paper presents a comparative structural analysis of lattice hybrid tower with six legs with conventional tubular steel tower for an onshore wind turbine using finite element method. Usually a lattice hybrid tower will have a conventional industry standard 'L' profile section for the lattice construction with four legs. In this work, the researcher attempted to identify and analyze the strength of six legged lattice hybrid tower designed with a special profile instead of four legged L profile. And to compare the structural benefits of special star profile with the conventional tubular tower. Using Ansys, a commercial FEM software, both static and dynamic structural analyses were performed. A simplified finite element model that represents the wind turbine tower was created using Shell elements. An ultimate load condition was applied to check the stress level of the tower in the static analysis. For the dynamic analysis, the frequency extraction was performed in order to obtain the natural frequencies of the tower.

• Applied Microscopy
• /
• 제41권1호
• /
• pp.75-79
• /
• 2011

For quantitative analysis of nano-crystal structure, we reported the accuracy improvement method of lattice parameters measured from electron diffraction. For calculation of Au lattice parameters used as a standard crystal structure, it was considered two different acquisition methods (detector and enegy-filter) and three different calculation methods (conventional, least-square and regression fit). As a result, the measurement reliability could be enhanced by using CCD camera which gives higher performance, while energy-filtering did not affect the improvement the camera constant accuracy. Also, the accuracy of lattice parameters could be improved up to $10^{-4}$ order by regression fitting with correction formula. Finally, it is expected that the combination of regression fitting and intensity extraction from energy-filtered precession electron diffraction gives a solution of quantitative structure analysis for unknown nano-crystals.

• 한국정보통신학회논문지
• /
• 제21권9호
• /
• pp.1711-1717
• /
• 2017

본 논문에서는 적절한 패턴의 입력 영상과 고속 중간 값 필터를 이용하여 집적 영상에서 빠르고 정확한 렌즈 배열의 격자 검출 방법을 제안한다. 렌즈 배열의 격자를 검출하기 위해서 수직, 수평 방향의 에지 영상이 필요하다. 이를 위해, 이전의 잘 알려진 격자 검출 방법은 1차원 중간 값 필터를 사용한다. 하지만 이 방법은 속도가 느리고 중간 값 필터 크기를 결정하는데 어려움이 발생한다. 이를 극복하기 위해, 본 논문에서는 binary counting방법으로 중간 값을 구함으로써 속도를 개선하고자 한다. 또, 에지를 잘 검출 할 수 있는 캘리브레이션 패턴 영상을 제안하여 정확도를 향상 시킨다. 실험을 통해 제안하는 방법이 기존의 방법보다 집적 영상에서 렌즈 배열의 격자를 검출할 때 우수하게 적용될 수 있음을 보여주었다.

• 한국정밀공학회지
• /
• 제22권12호
• /
• pp.170-174
• /
• 2005

A numerical system to extract effective elastic properties of polycrystalline thin-films for MEMS devices is developed. In this system, the statistical model based on lattice system is used for modeling the microstructure evolution simulation and the key kinetics parameters of given micrograph, grain distributions and deposition process can be extracted by inverse method proposed in the system. In this work, effects of kinetics parameters on the extraction of effective elastic properties of polycrystalline thin-films are studied by using statistical method. Effects of the fraction of the potential site($f_p$) among the parameters for deposition process of microstructure on the extraction of effective elastic properties of polycrystalline thin-films are investigated. For this research, polysilicon is applied to this system as the polycrystalline thin-films.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.50-54
• /
• 2004

A numerical system to extract effective elastic properties of polycrystalline thin-films for MEMS devices is already developed. In this system, the statistical model based on lattice system is used for modeling the microstructure evolution simulation and the key kinetics parameters of given micrograph, grain distributions and deposition process can be extracted by inverse method proposed in the system. In this work, the effects of kinetics parameters on the extraction of effective elastic properties of polycrystalline thin-films are studied by using statistical method. The effects of the fraction of the potential site( $f_{P}$ ) and the nucleation probability( $P_{N}$ ) among the parameters for deposition process of microstructure on the extraction of effective elastic properties of polycrystalline thin-films are studied.d.d.

• Journal of the korean society of oceanography
• /
• 제36권1호
• /
• pp.9-18
• /
• 2001

Chemical speciation of five heavy metals (Cr, Cu, Ni, Pb, Zn) has been analyzed from 37 surface and 2 core sediments of Kyeonggi Bay, using the modified sequential extraction method based on Tessier et at. (1979). The results show that heavy metals in the Kyeonggi Bay surface sediments are associated dominantly with the crystal lattice fraction. But in the polluted sediments of the Incheon North Harbor, the importance of the labile fractions increased while that of the lattice fraction decreased. In particular, the adsorbed and the easily reducible fractions showed a noticeable increase. In the core samples emerged a speciation pattern which differed significantly from that of the surface sediments. A sharp increase in the percentage of the reducible and organic/sulfide fractions and a decrease in the lattice fraction were observed. Throughout the vertical column, however, the metal contents in the lattice fraction showed stability while those of the labile fractions showed an upward increase. The strong association of heavy metals with the organic/sulfide fraction could be attributed in part to the sulfate reduction prevailing in the polluted harbor sediments.

• 산업기술연구
• /
• 제17권
• /
• pp.21-29
• /
• 1997

In this paper, an adaptive image binarization scheme is proposed for automated surface strain measurement. At first, we reviewed an image based 3D deformation factor measurement briefly. Then, a new adaptive thresholding method is proposed for the extraction of lattice pattern from a deformed plate image using its local mean and variance. Some experimental results are presented to verify the effectiveness of our approaches.

• 한국정보처리학회논문지
• /
• 제6권8호
• /
• pp.2088-2097
• /
• 1999

소프트웨어 도메인모형(Domain Model)으로부터 행위패턴을 식별하고, 개발 시스템의 동적 행위를 구체화한 사용 사례추출 및 구조화로 재사용을 증진시키는 소프트웨어 프레임워크(Framework) 구축방법을 제안한다. 대부분의 소프트웨어 행위모형이 이질적인 개발자의 요구사항이나 의도를 일관성 있게 모형화 하지 못하며, 재개발과 유지보수를 위한 구체적인 활용방안이 마련되어 있지 못하다. 따라서, 행위패턴을 식별하고 시스템에 반응하는 구체적인 기능성 항목인 사용 사례(Use Case)를 구조화하여 개발된 모형의 일관성을 보완하고, 재사용과 유지보수를 하는 재사용 프레임워크를 구축한다. 사용 사례의 구조화를 위해 격자모형(Lattice Model)이 이용되며, 재사용 구성항목을 추출하도록 유도할 수 있는 재사용 프로세스 구조와 세부절차를 소개한다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.114-115
• /
• 2012

본 논문에서는 마커를 이용한 기존의 전처리 기술을 개선하여 최소한의 마커로 왜곡을 교정하고 요소 영상을 자동으로 추출하는 방법에 대해 제안한다. 기존의 마커 방식과 성능은 비슷하지만 더 간단한 계산법을 이용한 방법을 제안하고, 이를 위한 컴퓨터 실험을 수행하고 교정 전, 후의 복원 영상을 비교하였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.19-22
• /
• 2004

A numerical system to extract effective elastic properties of polycrystalline thin-films for MEMS devices is already developed. In this system, the statistical model based on lattice system is used for modeling the microstructure evolution simulation and the key kinetics parameters of given micrograph, grain distributions and deposition process can be extracted by inverse method proposed in the system. In this work, the effective elastic properties of polysilicon, $BaTiO_3\;and\;ZrTiO_4$ are extracted using this system and by employing the fraction of the potential site($f_P$) as a kinetics parameter for the microstructure evolution, the statistical tendency of these materials is studied.