• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.10
• /
• pp.825-829
• /
• 2015

Theoretical calculations suggest that the thermoelectric figure of merit (ZT) can be improved by introducing a core-shell heterostructure to a semiconductor nanowire because of the reduced thermal conductivity of the nanowire. To experimentally verify the decrease in thermal conductivity in core-shell nanowires, the thermal conductivity of Ge-SixGe1-x core-shell nanowires grown by chemical vapor deposition (CVD) was measured using suspended microdevices. The silicon composition (Xsi) in the shells was measured to be about 0.65, and the remainder of the germanium in the shells was shown to play a role in decreasing defects originating from the lattice mismatch between the cores and shells. In addition to the standard four-point current- voltage (I-V) measurement, the measurement configuration based on the Wheatstone bridge was attempted to enhance the measurement sensitivity. The measured thermal conductivity values are in the range of 9-13 W/mK at room temperature and are lower by approximately 30 than that of a germanium nanowire with a comparable diameter.

• Korean Journal of Metals and Materials
• /
• v.49 no.11
• /
• pp.900-904
• /
• 2011

We have synthesized core-shell structured nanocrystals based on chalcopyrite-type $Cu_{0.2}InS_2$. The photoluminescence of the nanocrystals shows a significant blueshift in the emission wavelength by shell capping with ZnS layers. This shift can be explained with the compressive stress to core nanocrystals applied by the formation of a ZnS shell layer with a large lattice mismatch with the core. In this study, the emission wavelength could be tuned by changing the composition of the shell layers. Nanocrystals with emission wavelength ranging from 575 nm through 630 nm were synthesized by varying the portion of cadmium compared with zinc in the shell layers.

• Nuclear Engineering and Technology
• /
• v.54 no.2
• /
• pp.764-769
• /
• 2022

The United Arab Emirates is currently building and operating four units of the APR-1400 developed by a South Korean vendor, Korea Electric Power Corporation (KEPCO). This paper attempts to perform APR-1400 reactor core analysis by using the well-known two-step method. The two-step method was applied to the APR-1400 first cycle using the open-source nodal diffusion code, KOMODO. In this study, the group constants were generated using CASMO-4 fuel transport lattice code. The simulation was performed in Hot Zero Power (HZP) at steady-state and transient conditions. Some typical parameters necessary for the Nuclear Design Report (NDR) were evaluated in this paper, such as effective neutron multiplication factor, control rod worth, and critical boron concentration for steady-state analysis. Other parameters such as reactivity insertion, power, and fuel temperature changes during the Reactivity Insertion Accident (RIA) simulation were evaluated as well. The results from KOMODO were verified using PARCS and SIMULATE-3 nodal core simulators. It was found that KOMODO gives an excellent agreement.

• Journal of Industrial Technology
• /
• v.8
• /
• pp.31-35
• /
• 1988

To predict the airloads on helicopter rotors in hover, the doublet panel method of the first order is applied. For this simulation, the rotor blade is divided into many panels both in spanwise and in chordwise direction, and Kocurek-Tangler's prescribed wake with roll-up process is taken for determing wake geometry and then represented by vortex lattice. To abtain more physically realistic calculation of induced velocity, the vortex core model is adopted and the compressibility effect is considered by Karman-Tsien rule.

• Journal of Magnetics
• /
• v.3 no.1
• /
• pp.1-3
• /
• 1998

Valence state of the Sm metal is investigated using the total energy linearized muffin-tin orbital (LMTO) band method for the observed Sm-type crystal structure. We have considered both the relativistic and the semi-relativistic description of 4f-core electrons. We have found that, in the paramagnetic phase of bulk Sm, the trivalent valence state is more stable at the observed lattice constant than the divalent valence state.

• Nuclear Engineering and Technology
• /
• v.10 no.4
• /
• pp.203-213
• /
• 1978

A combination of computer codes such as LATREP, HWR, AXAV and CITATION is utilized in an attempt to analyze the nuclear design characteristics of the CANDU-PHWR of the Wolsung Unit 1. The major nuclear properties to be computed are tile lattice properties of CANDU fuel channel and the core channel power distribution. The computed results are compared with the PSR documentation for the Wolsung reactor. The observed discrepancies between our computation and the PSB values are discussed in terms of incomplete information on the description of the core configuration in the PSR and the different calculation methods.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.861-863
• /
• 1998

As-casted high nitrogen alloys (Fe-25%Mn-12%Cr-1%Ni) have been investigated to study core material. Nitrogen concentration in molten alloys was increased with increasing the square root of nitrogen gas pressure in melting chamber. This result can be explained by Sievert's law. Nitrogen that dissolved as a interstital solid solution element in austenite stainless steel increased lattice parameter and hardness. Electric resistivity($\rho$) was increased with increasing nitrogen concentration and was about $80{\mu}{\Omega}cm$ at room temperature. Coefficient of linear thermal expansion of the nitrogen steel was about $22{\times}10^{-6}/^{\circ}C$.

• Journal of Information Technology Services
• /
• v.7 no.3
• /
• pp.271-286
• /
• 2008

The core of the semantic web is ontology, which supports interoperability among semantic web applications and enables developer to reuse and share domain knowledge. It used a variety of fields such as Information Retrieval, E-commerce, Software Engineering, Artificial Intelligence and Bio-informatics. However, the reality is that various errors might be included in conceptual hierarchy when developing ontologies. Therefore, methodologies and supporting tools are essential to help the developer construct suitable ontologies for the given purposes and to detect and analyze errors in order to verify the inconsistency in the ontologies. In this paper we propose a new approach for ontology error detection based on the Concept Lattices of Formal Concept Analysis. By using the tool that we developed in this research, we can extract core elements from the source code of Ontology and then detect some structural errors based on the concept lattices. The results of this research can be helpful for ontology engineers to support error detection and construction of "well-defined" and "good" ontologies.

• Applied Microscopy
• /
• v.36 no.spc1
• /
• pp.47-56
• /
• 2006

Improvements are made to existing primitive cell volume measurement method to provide a real-time analysis capability for the phase analysis of nanocrystalline materials. Simplification is introduced in the primitive cell volume calculation leading to fast and reliable method for nano-phase identification and is applied to the phase analysis of Mo-Si-N nanocoating layer. In addition, comparison is made between real-time and film measurements for their accuracy of calculated primitive cell volume values and factors governing the accuracy of the method are determined. About 5% accuracy in primitive cell determination is obtained from camera length calibration and this technique is used to investigate the cell volume variation in WC-TiC core-shell microstructure. In addition to chemical compositional variation in core-shell type structure, primitive cell volume variation reveals additional information on lattice coherency strain across the interface.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05a
• /
• pp.225-230
• /
• 1996

A three-dimensional reactor core simulation code, MASTER has been developed as a part of ADONIS which is the Korean core design package in KAERI. CASMO-3 is used as a precedent lattice code for two-group microscopic cross section and heterogeneous formfunctions. The pin power reconstruction capability of CASMO-3/MASTER was evaluated for a validation and verification Five B&W critical experiments were selected as benchmark problems. These problems included two experiments for CE-type and three for WH-type fuel assemblies. Two of them contained gadolinia rods as burnable absorber. Comparison of the calculated pin power distributions with the measured ones demonstrate that CASMO-3/MASTER can predict the pin power distribution as well as CASMO-3/SIMULATE-3.