• Journal of the korean society of oceanography
• /
• 제36권1호
• /
• pp.9-18
• /
• 2001

Chemical speciation of five heavy metals (Cr, Cu, Ni, Pb, Zn) has been analyzed from 37 surface and 2 core sediments of Kyeonggi Bay, using the modified sequential extraction method based on Tessier et at. (1979). The results show that heavy metals in the Kyeonggi Bay surface sediments are associated dominantly with the crystal lattice fraction. But in the polluted sediments of the Incheon North Harbor, the importance of the labile fractions increased while that of the lattice fraction decreased. In particular, the adsorbed and the easily reducible fractions showed a noticeable increase. In the core samples emerged a speciation pattern which differed significantly from that of the surface sediments. A sharp increase in the percentage of the reducible and organic/sulfide fractions and a decrease in the lattice fraction were observed. Throughout the vertical column, however, the metal contents in the lattice fraction showed stability while those of the labile fractions showed an upward increase. The strong association of heavy metals with the organic/sulfide fraction could be attributed in part to the sulfate reduction prevailing in the polluted harbor sediments.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.2035-2038
• /
• 2002

The necessity of the filter coefficients compensation for the LTJ adaptive filter was explained generally and easily by analyzing it with respect to the time-varying transform domain adaptive filter. And also the reduction method of computational complexity for filter coefficients compensation was proposed and its effectiveness was verified through experiments using artificial and real speech signals. The proposed adaptive filter reduces the computational complexity for filter coefficients compensation by 95%, and when the filter is applied to the acoustic echo canceller with 1000 taps, the total complexity is reduced by 82%

• 전기의세계
• /
• 제28권4호
• /
• pp.53-63
• /
• 1979

Interface recombination velocity in $Al_{x}$G $a_{1-x}$ As-GaAs and $Al_{0.85}$, G $a_{0.15}$ As-GaA $s_{1-y}$S $b_{y}$ heterojunction systems is studied as a function of lattice mismatch. The results are applied to the design of highly efficient III-V heterojunction solar cells. A horizontal liquid-phase epitaxial growth system was used to prepare p-p-p and p-p-n $Al_{x}$G $a_{1-x}$ As-GaA $s_{1-y}$S $b_{y}$-A $l_{x}$G $a_{1-x}$ As double heterojunction test samples with specified values of x and y. Samples were grown at each composition, with different GaAs and GaAs Sb layer thicknesses. A method was developed to obtain the lattice mismatch and lattice constants in mixed single crystals grown on (100) and (111)B oriented GaAs substrates. In the AlGaAs system, elastic lattice deformation with effective Poisson ratios .mu.$_{eff}$ (100=0.312 and .mu.$_{eff}$ (111B) =0.190 was observed. The lattice constant $a_{0}$ (A $l_{x}$G $a_{1-x}$ As)=5.6532+0.0084x.angs. was obtained at 300K which is in good Agreement with Vegard's law. In the GaAsSb system, although elastic lattice deformation was observed in (111) B-oriented crystals, misfit dislocations reduced the Poisson ratio to zero in (100)-oriented samples. When $a_{0}$ (GaSb)=6.0959 .angs. was assumed at 300K, both (100) and (111)B oriented GaAsSb layers deviated only slightly from Vegard's law. Both (100) and (111)B zero-mismatch $Al_{0.85}$ G $a_{0.15}$As-GaA $s_{1-y}$S $b_{y}$ layers were grown from melts with a weight ratio of $W_{sb}$ / $W_{Ga}$ =0.13 and a growth temperature of 840 to 820 .deg.C. The corresponding Sb compositions were y=0.015 and 0.024 on (100) and (111)B orientations, respectively. This occurs because of a fortuitous in the Sb distribution coefficient with orientation. Interface recombination velocity was estimated from the dependence of the effective minority carrier lifetime on double-heterojunction spacing, using either optical phase-shift or electroluminescence timedecay techniques. The recombination velocity at a (100) interface was reduced from (2 to 3)*10$^{4}$ for y=0 to (6 to 7)*10$^{3}$ cm/sec for lattice-matched $Al_{0.85}$G $a_{0.15}$As-GaA $s_{0.985}$S $b_{0.015}$ Although this reduction is slightly less than that expected from the exponential relationship between interface recombination velocity and lattice mismatch as found in the AlGaAs-GaAs system, solar cells constructed from such a combination of materials should have an excellent spectral response to photons with energies over the full range from 1.4 to 2.6 eV. Similar measurements on a (111) B oriented lattice-matched heterojunction produced some-what larger interface recombination velocities.ities.ities.s.

• 한국항공우주학회지
• /
• 제44권5호
• /
• pp.381-390
• /
• 2016

본 연구에서는 이중구조팬의 소음특성을 알아보고 소음저감 방법으로 알려진 톱니형 뒷전(Serrated Trailing Egde)을 적용하여 이중구조팬의 소음을 저감시켰다. 해석에는 Lattice Boltzmann Method(LBM)를 이용한 비정상 전산해석을 수행하였으며 해석의 타당성을 평가하기 위하여 시험을 실시하였다. 이중구조팬은 일반적인 팬처럼 단일의 Blade Passing Frequency(BPF)를 갖는 것이 아니라 내부팬과 외부팬 각각의 BPF가 서로 다른 음역대에서 나타나는 것을 확인 하였다. 톱니형 뒷전을 내부팬에 적용하여 경계층에서의 구속와류와 뒷전에서의 와류흘림이 억제 또는 분산되고 광역소음뿐만 아니라 팬의 토크도 저감되었다.

• 방송공학회논문지
• /
• 제15권6호
• /
• pp.742-748
• /
• 2010

최근의 반복 검출 및 복호 (iterative detection and decoding : IDD) 기법에서의 연판정 방식에서는 log-likelihood ratio (LLR) 값의 신뢰도를 높이기 위해 기존의 구복호화 (sphere decoding) 방식보다는 리스트를 형성하는 구복호화방식 (list sphere decoding : LSD)이 대두되고 있다. 기존의 구복호화 방식과는 달리, 리스트 구복호화 방식은 그 성능의 우수함에도 불구하고 여러 격자 포인트들을 검출해야하므로 신호대잡음비 (signal-to-noise ratio : SNR)의 증가에 따른 복잡도의 이득을 거의 취할 수 없다. 또한 리스트 구복호화 기법은 리스트의 크기가 고정되어 있다는 점에서 비효율적이다. 본 논문에서는, 검출 과정에서 LLR에 큰 영향을 미치지 않는 격자 포인트들을 제거하는 기법을 소개한다. 이 과정은 구반경의 최적화를 바탕으로 이루어지며, 제안된 방식은 기존의 리스트 구복호화 기법과 비교하여 성능이 크게 떨어지지 않은 가운데 복잡도를 크게 감소시킨다.

• Applied Microscopy
• /
• 제30권4호
• /
• pp.337-345
• /
• 2000

사파이어 기판을 이용한 GaN 박막성장에서 완충층의 사용과 기판의 질화처리는 GaN 박막 내의 격자결함을 줄이는 가장 보편적인 방법이다. GaN박막의 초기 핵생성과 성장 거동을 향상시키기 위한 새로운 방법으로 사파이어 표면을 질소 활성화 이온빔으로 처리하는 방법이 시도되었다. 활성화 이온빔 처리의 결과 약 10nm두께의 비정질 $AlO_xN_y$ 층이 형성되었으며 GaN의 성장온도에서 부분적으로 결정화되어 계면 부위에 고립된 비정질 영역으로 존재하였다. 계면에 존재하는 비정질 층은 기판과 박막사이에서 발생하는 열응력을 효과적으로 감소시키는 역할이 가능하며 이를 확인하기 위하여 활성화 이온빔 처리에 의한 GaN박막 내의 격자변형량 차이를 비교하였다. GaN박막에서 얻어진 $[\bar{2}201]$ 정대축고차 Laue도형을 전산모사 도형과 비교하여 격자변형량을 측정하였다. 본 연구의 결과 활성화 이온빔 처리를 하지 않은 기판 위에 성장시킨 GaN박막의 격자변형량은 처리한 경우에 비해 6배 이상 높은 값을 가졌으며 따라서 활성화 이온빔 처리에 의해 GaN박막의 열응력은 크게 감소함을 확인하였다.

• 대한기계학회논문집B
• /
• 제38권4호
• /
• pp.357-363
• /
• 2014

리튬이온전지의 다공성 전극내에서 전해액 주입 후 발생하는 함침현상에 관하여 격자 볼츠만법을 이용하여 수치해석적으로 연구하였다. 다공성 전극은 전극 제조 중 압연공정을 거치므로 압축된 전극의 공극률과 두께변화가 발생하여 전해액 함침성에 영향을 미치게 된다. 본 연구에서는 2 차원 격자 볼츠만법을 통하여 압축률에 따른 전해액 분포와 포화도 변화를 제시하였다. 압축된 전극에서의 전해액 침투경로의 변화는 기공의 두께방향 크기 감소에 기인하며, 따라서 전극의 함침성이 크게 감소하였음을 확인하였다.

• 한국재료학회지
• /
• 제15권7호
• /
• pp.435-438
• /
• 2005

Single phase $Zn_4Sb_3$ with $98.5\%$ of theoretical density was successfully produced by direct hot pressing of elemental powders containing $1.2 at\%$ excess Zn for compensating the evaporation during the process. Temperature dependences of thermoelectric properties were investigated from 4 K to 300 K. Seebeck coefficient, electrical conductivity, thermal conductivity as well as thermoelectric figure of merit showed the discontinuity in variation at 242K, indicating the $\alpha-\beta$, phase transformation. Interestingly, it was found that lattice thermal conductivity by phonons is dominant in total thermal conductivity of $\alpha-\beta$. Therefore, it is expected that thermoelectric properties can be improved by reduction of lattice thermal conductivity inducing lattice scattering centers by doping and solid solution.

• 한국공간구조학회논문집
• /
• 제23권4호
• /
• pp.27-34
• /
• 2023

In this study, the seismic response characteristics of the three analysis model with or without TMD were investigated to find out the effective dome shape. The three analysis models are rib type, lattice type and geodesic type dome structure composed of space frame. The maximum vertical and horizontal displacements were evaluated at 1/4 point of the span by applying the resonance harmonic load and historical earthquake loads (El Centro, Kobe, Northridge earthquakes). The study of the effective TMD installation position for the dome structure shows that seismic response control was effective when eight TMDs were installed in all types of analysis model. The investigation of the efficiency of TMD according to dome shape presents that lattice dome and geodesic dome show excellent control performance, while rib dome shows different control performance depending on the historical seismic loads. Therefore, lattice and geodesic types are desirable for seismic response reduction using TMD compared to rib type.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.260-263
• /
• 2000

A technique that uses linear prediction to achieve noise reduction in a voice signal which has been mixed with an ambient noise (Signal to Noise (S-N) ratio = about 0dB) is proposed. This noise reduction method which is based on the linear prediction estimates the voice spectrum while ignoring the spectrum of the noise. The performance of the noise reduction method is first examined using the transversal linear predictor filter. However, with this method there is deterioration in the tone quality of the predicted voice due to the low level of the S-N ratio. An additional processing circuit is then proposed so as to adjust the noise reduction circuit with an aim of improving the problem of tone deterioration. Next, we consider a practical application where the effects of round on errors arising from fixed-point computation has to be minimized. This minimization is achieved by using the lattice predictor filter which in comparison to the transversal type, is Down to be less sensitive to the round-off error associated with finite word length operations. Finally, we consider a practical application where noise reduction is necessary. In this noise reduction method, both the voice spectrum and the actual noise spectrum are estimated. Noise reduction is achieved by using the linear predictor filter which includes the control of the predictor filter coefficient’s update.