• Title/Summary/Keyword: Latitude

Search Result 1,043, Processing Time 0.037 seconds

Generation of Ionospheric Delay in Time Comparison for a Specific GEO Satellite by Using Bernese Software

  • Jeong, Kwang Seob;Lee, Young Kyu;Yang, Sung Hoon;Hwang, Sang-wook;Kim, Sanhae;Song, Kyu-Ha;Lee, Wonjin;Ko, Jae Heon
    • Journal of Positioning, Navigation, and Timing
    • /
    • v.6 no.3
    • /
    • pp.125-133
    • /
    • 2017
  • Time comparison is necessary for the verification and synchronization of the clock. Two-way satellite time and frequency (TWSTFT) is a method for time comparison over long distances. This method includes errors such as atmospheric effects, satellite motion, and environmental conditions. Ionospheric delay is one of the significant time comparison error in case of the carrier-phase TWSTFT (TWCP). Global Ionosphere Map (GIM) from Center for Orbit Determination in Europe (CODE) is used to compare with Bernese. Thin shell model of the ionosphere is used for the calculation of the Ionosphere Pierce Point (IPP) between stations and a GEO satellite. Korea Research Institute of Standards and Science (KRISS) and Koganei (KGNI) stations are used, and the analysis is conducted at 29 January 2017. Vertical Total Electron Content (VTEC) which is generated by Bernese at the latitude and longitude of the receiver by processing a Receiver Independent Exchange (RINEX) observation file that is generated from the receiver has demonstrated adequacy by showing similar variation trends with the CODE GIM. Bernese also has showed the capability to produce high resolution IONosphere map EXchange (IONEX) data compared to the CODE GIM. At each station IPP, VTEC difference in two stations showed absolute maximum 3.3 and 2.3 Total Electron Content Unit (TECU) in Bernese and GIM, respectively. The ionospheric delay of the TWCP has showed maximum 5.69 and 2.54 ps from Bernese and CODE GIM, respectively. Bernese could correct up to 6.29 ps in ionospheric delay rather than using CODE GIM. The peak-to-peak value of the ionospheric delay for TWCP in Bernese is about 10 ps, and this has to be eliminated to get high precision TWCP results. The $10^{-16}$ level uncertainty of atomic clock corresponds to 10 ps for 1 day averaging time, so time synchronization performance needs less than 10 ps. Current time synchronization of a satellite and ground station is about 2 ns level, but the smaller required performance, like less than 1 ns, the better. In this perspective, since the ionospheric delay could exceed over 100 ps in a long baseline different from this short baseline case, the elimination of the ionospheric delay is thought to be important for more high precision time synchronization of a satellite and ground station. This paper showed detailed method how to eliminate ionospheric delay for TWCP, and a specific case is applied by using this technique. Anyone could apply this method to establish high precision TWCP capability, and it is possible to use other software such as GIPSYOASIS and GPSTk. This TWCP could be applied in the high precision atomic clocks and used in the ground stations of the future domestic satellite navigation system.

Relationship of Front Points' Location and Function to Response Zone (모혈(募穴)의 위치(位置) 및 작용(作用)과 반응대(反應帶)의 상관성(相關性) 고찰(考察))

  • Lee Dong-Kyu;Na Chang-Su
    • Korean Journal of Acupuncture
    • /
    • v.17 no.1
    • /
    • pp.157-171
    • /
    • 2000
  • Front Points are told to be deeply related with viscera and bowels in oriental medicine. Since the Front Points are treated as response zone, it can be used for the diagnosis and treatment of disease in viscera and bowels. The location of Front Points are very similar to the several response zones in western medicine. Diagnostic aspect of Front Points to several response zones were discussed in here based on many thesis and reported laboratorial experiments. Front Points are located in the same latitude of viscera and bowels. So, diagnosis result in Front Points represent condition of each organs. Palpitation of the Front Points can make diagnosis of body surface and the organ beneath the body surface. Such use of Front Points for diagnosis can used as the treatment points also. Only three Front Points (LU-1, LI-14, GB-24) in lung, liver and gall bladder meridian are located on its meridian. The Front Points of Stomach (CV-12) cross its meridian or closely located to it. Unlike to those four Front Points that are matched to its meridian, other eight Front Points do not located or cross its meridian at all. It seems that the location of Front Points are decided by the location of organs and the conditions at a certain organ do not delivered by the meridians but delivered by main collaterals, tertiary collaterals and superficial collaterals instead. Among visceral response zones, Five Front Points (CV-3, CV-4, CV-12, LI-14, GB-25) are exactly matched to Head's response zone and other Front Points are closely matched to the Head's response zone. There are five Front Points (CV-12, CV-14, CV-17, LI-14, GB-24) that are matched with the location of pressing palpitation point and other Front Points are closely located to the pressing palpitation point. So far, it was clear that the Front Points do have important role as response points. Symptoms expressed to the Front Points were delivered conditions or symptoms occur in corresponding organ and the anatomical location of Front Points were also found near the corresponding organ. Diagnostic and therapeutic application of Front Points for Organ theory and in the Interpromotion-restraint of the five elements in oriental medicine can be made in future to increase its potential.

  • PDF

Hydrological impact of Atmospheric River landfall on the Korean Peninsula (Atmospheric River의 한반도 수문학적 영향에 대한 연구)

  • Han, Heechan;Choi, Changhyun;Moon, Heyjin;Jung, Jaewon;Lee, Choongke;Kim, Hung Soo
    • Journal of Korea Water Resources Association
    • /
    • v.53 no.11
    • /
    • pp.1039-1047
    • /
    • 2020
  • Atmospheric rivers, which transport large amount of water vapor from mid-latitude to the inland, are an important driving force of water cycle and extreme hydrologic phenomenas. The main objective of this study is to analyze the hydrological impact of the AR landfalls on the Korean Peninsula in 2000 - 2015. The result showed that the AR is closely related to the characteristics of precipitation, water level and runoff in the Korean Peninsula. The landfalls of the AR affected about 57% of annual precipitation on the Korean Peninsula, and had a greatest impact on the summer rainfall. It also affected the water level and runoff at the five major rivers of Korea, and water levels exceeding the thresholds of flood warning were observed when the AR landed. Moreover, it was found that the runoff above the third quartile with AR landfalls. These results suggest that the AR not only has a significant influence on the hydrological characteristics of the Korean Peninsula, but also have a close relationship with the extreme hydrological events like floods. The results of this study are expected to be used as the reference for the analysis of the impact of the AR on the various fields in the Korean Peninsula.

Sample thread based real-time BRDF rendering (샘플 쓰레드 기반 실시간 BRDF 렌더링)

  • Kim, Soon-Hyun;Kyung, Min-Ho;Lee, Joo-Haeng
    • Journal of the Korea Computer Graphics Society
    • /
    • v.16 no.3
    • /
    • pp.1-10
    • /
    • 2010
  • In this paper, we propose a novel noiseless method of BRDF rendering on a GPU in real-time. Illumination at a surface point is formulated as an integral of BRDF producted with incident radiance over the hemi-sphere domain. The most popular method to compute the integral is the Monte Carlo method, which needs a large number of samples to achieve good image quality. But, it leads to increase of rendering time. Otherwise, a small number of sample points cause serious image noise. The main contribution of our work is a new importance sampling scheme producing a set of incoming ray samples varying continuously with respect to the eye ray. An incoming ray is importance-based sampled at different latitude angles of the eye ray, and then the ray samples are linearly connected to form a curve, called a thread. These threads give continuously moving incident rays for eye ray change, so they do not make image noise. Since even a small number of threads can achieve a plausible quality and also can be precomputed before rendering, they enable real-time BRDF rendering on the GPU.

Determination of the Cold Weather Concreting Period and Early Frost Damage Risk Using Climate Data of Korea (기상자료를 이용한 우리나라 한중콘크리트 적용기간과 초기동해 위험일 산정)

  • Han, Min-Cheol;Lee, Jun-Seok
    • Journal of the Korea Institute of Building Construction
    • /
    • v.17 no.1
    • /
    • pp.73-81
    • /
    • 2017
  • In this paper, the periods of cold weather concrete and early frost damage depending on each region in South Korea were studied using the climate data from Korea meteorological administration. The specifications of Korea Concrete Institute(KCI) and Architectural Institute of Japan(AIJ) were applied to provide the periods of cold weather concrete. The periods of early frost damage risk(EFD) were calculated by Hasegawa's suggestion depending on 91 cities in Korea. Climate data for 5 years (2008~2012) were used to obtain both of the periods. Existing data from 1971 to 2000 were also used to compare differences in the periods between past and present study. The periods of cold weather concrete by KCI were calculated about 98 days on average. As the latitude goes up and close to mountain areas, the periods tend to be increased. The periods by present study was shown to be reduced compared to that of previous study by 1~2days. The period of EFD was provided with the level of daily lowest temperature from $-5^{\circ}C$, $-2^{\circ}C$ and $0^{\circ}C$. The beginning day of the period of EFD was earlier than the period of cold weather concrete and the finishing day of the period of EFD was later than the period of cold weather concrete.

A Design and Implementation for a Reliable Data Storage in a Digital Tachograph (디지털 자동차운행기록계에서 안정적인 데이터 저장을 위한 설계 및 구현)

  • Baek, Sung Hoon;Son, Myunghee
    • KIPS Transactions on Computer and Communication Systems
    • /
    • v.1 no.2
    • /
    • pp.71-78
    • /
    • 2012
  • The digital tachograph is a device that automatically records speed and distance of a vehicle, together with the driver's activity and vehicle status at an accident. It records vehicle speed, break status, acceleration, engine RPM, longitude and latitude of GPS, accumulated distance, and so on. European Commission regulation made digital tachographs mandatory for all trucks from 2005. Republic of Korea made digital tachographs mandatory for all new business vehicles from 2011 and is widening the range of vehicles that must install digital tachographs year by year. This device is used to analyze driver's daily driving information and car accidents. Under a car accident that makes the device reliability unpredictable, it is very important to store driving information with maximum reliability for its original mission. We designed and implemented a practical digital tachograph. This paper presents a storage scheme that consists of a first storage device with small capacity at a high reliability and a second storage device with large capacity at a low cost in order to reliably records data with a hardware at a low cost. The first storage device records data in a SLC NAND flash memory in a log-structured style. We present a reverse partial scan that overcomes the slow scan time of log-structured storages at the boot stage. The scheme reduced the scan time of the first storage device by 1/50. In addition, our design includes a scheme that fast stores data at a moment of accident by 1/20 of data transfer time of a normal method.

Researches on the Case Study of Facade Greening in East Europe (동유럽의 건물벽면녹화에 관한 사례 연구)

  • Park, Yong-Jin
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.11 no.1
    • /
    • pp.23-32
    • /
    • 2008
  • In order to discern the development of technology in creating, properly managing, and characterizing the types used in facade greening, this article examines the instances of facade greening of Bulgaria, Greece and Turkey which is not only located in the latitude similar to South Korea's but also influenced by the both continental and oceanic climate. The study was carried out for 11 months from October 2002 to September 2003. The total 242 places were researched and they were 83 sites in Athens, 77 sites in Istanbul, and 82 sites in Sofia. Varieties, usage, configuration, foundation and characteristics of plants were studied. The goals of greening, and building's surface roughness and thickness, direction of the wall were also researched. The result of survey are as follows; 17 families and 33 species of climbing plants were found in Athens, Istanbul, and Sofia. Thickness of facade greening in the three cities is 46cm in Athens, 39cm in Istanbul, and 53cm in Sofia. The possible facade greening size per a climbing plant, Parthenocissus tricupidata takes up the largest portion of the wall in the three cities similarly followed by Vitis vinifera and Wistaria spp. By its diversity it can be assumed that these plants are most practical for large scale of facade greening and full covering. Evergreen climbing plants such as Hedera helix and Ficus niponica are useful plants for relatively large scale of facade greening area. In the facade greening types, the climbing type is the most dominant in the three cities and most of the climbing type was planted on the natural foundation but the hanging and combination types were planted on an artificial foundation located on the balcony or on the roof of the building. In the directions of the walls for facade greening, the west direction are most popular which is for the improvement of sun shading in summer season. In Sofia the apartments were most applied with facade greening but In Istanbul and Athens the residential buildings and the public buildings were adapted with facade greening actively as well as residential building. The purpose of lowering summer heat took up the highest portion followed by the purpose of ornamentation and maintaining privacy in all surveyed cities.

3-D Crustal Velocity Tomography in the Southern Part of The Korean Peninsula (한반도 남부지역의 3-D 속도 토모그래피)

  • Kim, So Gu;Li, Qinghe
    • Economic and Environmental Geology
    • /
    • v.31 no.2
    • /
    • pp.127-139
    • /
    • 1998
  • A new technique of simultaneous inversion for 3-D seismic velocity structure by using direct, reflected, and refracted waves is applied to the southeast part of the Korean Peninsula including Pohang Basin, Kyongsang Basin and Ryongnam Massif. Pg, Sg, PmP, SmS, Pn, and Sn arrival times of 44 events with 554 seismic rays are inverted for locations and crustal structure. $6{\times}6$ with $0.5^{\circ}$ and 8 layers (4 km each layer) model was inverted. 3-D seismic crustal velocity tomography including eight sections from surface to Moho, ten profiles along latitude and longitude are analyzed. The results are as follows: 1) the average velocity and thickness of sediment are 5.04 km/s and 3-4 km, and the velocity of basement is 6.11 km/s. The shape of velocity in shallower layer is agreement with Bouguer gravity anomaly (Cho et al., 1997). 2) the velocities fluctuate strongly in the upper crust. The velocity distribution of the lower crust under Conrad appears basically horizontal. 3) the average depth of Moho is 30.4 km, and velocity is 8.01 km/s. 4) from the velocity and depth of the sediment, the thickness, velocity and form of the upper crust, and the depth and form of Moho, we can find the obvious differences among Ryongnam Massif, Kyongsang Basin and Pohang Basin. 5) the deep faults (a Ulsan series faults) near Kyongju and Pohang areas can be found to be normal and/or thrust faults with detachment extended to the bottom of the upper crust.

  • PDF

Design of Twitter data collection system for regional sentiment analysis (지역별 감성 분석을 위한 트위터 데이터 수집 시스템 설계)

  • Choi, Kiwon;Kim, Hee-Cheol
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2017.10a
    • /
    • pp.506-509
    • /
    • 2017
  • Opinion mining is a way to analyze the emotions in the text and is used to identify the emotional state of the author and to find out the opinions of the public. As you can analyze individual emotions through opinion mining, if you analyze the text by region, you can find out the emotional state you have in each region. The regional sentiment analysis can obtain information that could not be obtained from personal sentiment analysis, and if a certain area has emotions, it can understand the cause. For regional sentiment analysis, we need text data created by region, so we need to collect data through Twitter crawling. Therefore, this paper designs a Twitter data collection system for regional sentiment analysis. The client requests the tweet data of the specific region and time, and the server collects and transmits the requested tweet data from the client. Through the latitude and longitude values of the region, it collects the tweet data of the area, and it can manage the text by region and time through collected data. We expect efficient data collection and management for emotional analysis through the design of this system.

  • PDF

Geochemistry and Stable Isotopes of Carbonated Waters in South Korea (남한 탄산수의 지구화학적 특성과 안정동위원소 조성)

  • 윤정아;김규한
    • Journal of the Korean Society of Groundwater Environment
    • /
    • v.7 no.3
    • /
    • pp.116-124
    • /
    • 2000
  • Geochemical and isotopic analyses were carried out to investigate hydrochemical characteristics, source of carbon species in the carbonated waters in South Korea. Most Korean carbonated waters from different geologic settings are characterized by a Ca-HCO$_3$type with a relatively low pH range from 5.3 to 6.3 (avg. 6.0). The concentrations of cations and anions in the carbonate waters are in the order of Ca$^{2+}$>Na$^{+}$>Mg$^{2+}$>Si$^{4+}$>Fe$^{2+}$>K$^{+}$ and HCO$_3$$^{-}$>SO$_4$$^{2-}$>Cl$^{-}$, respectively. The HCO$_3$$^{-}$ ion is more enriched in the carbonated water from the sedimentary rock and granitic rock of Mesozoic age in the Gyungsang basin(GII) and the Precambrian metamorphic rock and Jurassic granitic rocks of the Gyunggj massif in the Gangwon province(GⅠ) than those of the meta-sedimentary rock and granite in the Ogcheon zone(GⅢ). Based on the oxygen and hydrogen isotopic data, the carbonated waters are derived from the meteoric water, showing apparent latitude and altitude effects. The $delta$$^{13}$C values of carbon species in the carbonated water are in between -6.23 and 0.0 $textperthousand$, suggesting inorganic source of carbon originated from the carbonate mineral and carbonate rock in the aquifer.

  • PDF