• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.435-440
• /
• 2001

In this study, torsional and lateral vibrations of a gear box transmission system were analyzed theoretically using some mathematical models and examined to determine the causes of its excessive vibrations. As the results, it was found there exist possibility of resonance between gear mesh frequencies and lateral vibration mode of the transmission shaft during the third shifting mode operation. In order to avoid this resonance, we proposed changing the arrangement of gears on the transmission shaft. The measured vibration levels of the improved gear box were dramatically reduced. These results may be helpful to design a machine tool gear box with low noise and vibration.

• 한국산학기술학회논문지
• /
• 제20권12호
• /
• pp.797-803
• /
• 2019

본 연구는 동력분산형 고속열차의 횡방향 진동을 저감하기 위하여 진행되었다. 동역학 해석을 통한 연구에서 동력분산형 고속열차 시제차량(HEMU-430X)은 고속열차에서 주로 사용되는 차륜프로파일(XP55, GV40, S1002)에 관계없이 낮은 등가답면구배에서 횡방향 진동이 커지고, 차륜 마모가 진행되어 등가답면구배가 커지면 횡진동이 감소하는 경향을 보였다. 이는 HEMU-430X에 적용된 현가장치 특성치들의 조합된 결과로 인해 등가답면구배가 낮을 때 차체와 대차가 1.4Hz의 주파수로 공진하여 차체 헌팅이 발생되기 때문이다. 고속열차의 횡방향 진동저감에 대한 해외 사례에서 요댐퍼의 유압강성(Hydraulic stiffness)을 낮추어 진동을 개선한 사례를 고찰하였다. 요댐퍼의 시리즈 강성은 유압강성과 탄성조인트의 조합인데 본 연구에서는 유압강성 조정대신 비교적 간단하게 할 수 있는 탄성조인트의 강성을 낮추어 횡방향 진동을 개선하고자 하였다. 신규 제작된 탄성조인트를 적용한 요댐퍼의 시리즈 강성은 기존 요댐퍼 대비 60% 수준으로 낮았다. 60% 수준의 시리즈 강성이 적용된 요댐퍼를 HEMU-430X의 TC~M2 3량에 설치하여 시운전 시험을 수행하였다. 시운전 시험 결과 TC를 선두로 한 하행 주행 시 TC~M1의 횡방향 진동이 개선되고, MC를 선두로 한 상행 주행 시 후미 TC차량의 횡진동이 개선되는 결과를 보였다. 본 연구의 진동저감 방안은 향후 영업운전을 위해 도입되는 EMU-250 및 EMU-320의 횡방향 진동 문제 발생 시 해결책으로 적용할 수 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.722-728
• /
• 2012

In railway vehicle, riding comfort depends mainly on the secondary lateral damper and track condition. When the damping force of lateral damper becomes abnormal condition or the track condition is worse, the running stability and ride comfort of the railway vehicles go down. In addition, the lateral motion of carbody is increased. Therefore, the lateral motion of carbody is reviewed carefully by considering lateral damping force and track condition of the railway line in design stage. In this study, the lateral displacement of carbody was studied in accordance with lateral damping force and track condition. The target vehicle is EMU for subway line.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.308-313
• /
• 2005

An urban railway vehicle has a characteristics such as that a lot of passenger use it and the major of passenger is standee. The ride comfort of standee is greatly influenced by the lateral dynamic characteristics of vehicle. So the lateral vibration is important factor for the improvement of ride comfort. In this study, vibration test of railway vehicle is carried out under the same condition of field driving to find out the major factor of vibration. By considering the test results under the various driving condition, the vibrational characteristics of vehicle is verified.

• 한국철도학회논문집
• /
• 제6권4호
• /
• pp.215-220
• /
• 2003

In this paper the dynamic characteristics of a Swing Motion Bogie, such as a critical speed and a carbody vibration, are investigated in reply to the request of the Meridian Rail Corporation in the United States. Also described are experimental results of the maximum speed, the derailment coefficient, the lateral force, the vertical force, the vibration acceleration and steady state lateral acceleration measured from main line tests.

• 소음진동
• /
• 제11권1호
• /
• pp.82-88
• /
• 2001

In a transmission or geared rotor system a coupled phenomenon of lateral and torsional vibrations may occur due to the gear meshing effect. Particularly, in high speed or low vibration and low noise applications of geared rotor systems a coupled rotordynamic analysis is required to precisely predict their dynamic characteristics. In this paper a generalized finite element model of a gear pair element is developed, which actively couples the lateral and torsional vibrations due to the gear meshing effect. In the modeling the generalized forces due to the transmission error. geometrical eccentricities. and unbalances in the gear system are also considered. Then. using the developed gear pair element model a coupled unforced rotordynamic analysis is performed with a prototype 800 RT turbo-chiller rotor-bearing system having a hull-pinion speed increasing gear. Results show that the torsional vibration characteristics experience some changes due to the gear meshing and lateral dynamic coupling effect, but that they have no adverse effect and the lateral ones have no practical changes in an operating speed range.

• 한국소음진동공학회논문집
• /
• 제17권10호
• /
• pp.946-949
• /
• 2007

This paper discusses the lateral vibration of a beam with boundary condition of one end fixed and the other end free. The uniform beam has a solution by summation of some simple exponential functions. But if its shape is not uniform, its solution could be by Bessel's function or mathematical solution could not exist. Even if the solution of Bessel's function exists, as Bessel function is a series function, we must get the solution by numerical method. Author had proposed the solution of the matrix method by Ritz's method and a new mode shape function, and had earned the good results for a wedge beam. Hereby a vibration analysis for the tapered beam with circle cross section was executed, and so good results were showed.

• 한국소음진동공학회논문집
• /
• 제19권1호
• /
• pp.35-41
• /
• 2009

Through the multibody dynamic simulation, the analysis model of the modalohr freight car of the DMT freight car was developed. By using the developed analysis model, the running dynamic characteristics was inquired through the dynamic analysis about the modalohr freight car. As the running speed and the primary suspension were increased, the lateral and vertical vibration accelerations of the car-body and the bogie were also increased. In case of the lateral vibration acceleration of the car-body, however, review should be considered since it can be influenced by the nonlinear characteristic of the primary suspension. The lateral and vertical vibration of the car-body were generated at the frequency of $2{\sim}3\;Hz$ and $7{\sim}8\;Hz$. And the lateral and vertical vibration of the bogie were generated at the frequency of $25{\sim}35\;Hz$ at the low speed section, $40{\sim}50\;Hz$ at the high speed section.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.984-987
• /
• 2003

This paper discusses the lateral vibration of a bar which has its tip free. The uniform bar has a solution by summation of some simple exponential functions. But if its shape is not uniform, its solution could be by Bessel's function, or mathematical solution could not be existed. Even if the solution of Bessel's function exists. as Bessel function is a series function, we must get the solution by numerical method, Hereof the author proposes the solution of the matrix method by Ritz's method, and proposes a new deflection shape

• International Journal of Railway
• /
• 제7권2호
• /
• pp.57-63
• /
• 2014

This paper presents the optimization of suspension characteristics under the condition of curved track railway vehicles. Reducing lateral acceleration on curved track is an issue for high-speed railway vehicles. In terms of curved track running environments, reducing the lateral vibration of railway vehicles is critical to safety and curving performance. The properties of lateral damping and stiffness of both primary and secondary suspension show effect on wheel-set, bogie and car-body. Analysis for reducing the lateral vibration of rail vehicles with respect to the characteristics of both primary and secondary suspension has been developed using ADAMS/Rail. Response Surface Method has been chosen for the purpose of verifying correlation effects among design parameters. Also, this paper suggests the method for designing optimal suspension of railway vehicles on curved track. The optimization result indicates decrement of lateral acceleration on wheel-set by 3% and bogie by 1% on curved track. Finally, this paper comes to the conclusion that suspension system of railway vehicle (KTX I) is properly designed when regarding lateral vibration of railway vehicle on diverse curved track condition.