• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.3
• /
• pp.243-248
• /
• 2009

Purpose: Rehabilitation of the edentulous posterior maxilla with dental implants often poses difficulty because of insufficient bone volume caused by pneumatization of the maxillary sinus and by crestal bone resorption. Sinus grafting technique was developed to increase the vertical height to overcome this problem. The present study was designed to evaluate the sinus floor augmentation with anorganic bovine bone (Bio-$cera^{TM}$) using histomorphometric and clinical measures. Patients and methods: Thirteen patients were involved in this study and underwent total 14 sinus lift procedures. Residual bone height was ${\geq}2mm$ and ${\leq}6mm$. Lateral window approach was used, with grafting using Bio-$cera^{TM}$ only(n=1) or mixed with autogenous bone from ramus and/or maxillary tuberosity(n=13). After 6 months of healing, implant sites were created with 3mm diameter trephine and biopsies taken for histomorphometric analysis. The parameters assessed were area fraction of new bone, graft material and connective tissue. Immediate and 6 months after grafting surgery, and 6 months after implantation, computed tomography (CT) was taken and the sinus graft was evaluated morphometric analysis. After implant installation at the grafted area, the clinical outcome was checked. Results: Histomorphometry was done in ten patients.Bio-$cera^{TM}$ particles were surrounded by newly formed bone. The graft particles and newly formed bone were surrounded by connective tissue including small capillaries in some fields. Imaging processing revealed $24.86{\pm}7.59%$ of new bone, $38.20{\pm}13.19%$ connective tissue, and $36.92{\pm}14.51%$ of remaining Bio-$cera^{TM}$ particles. All grafted sites received an implant, and in all cases sufficient bone height was achieved to install implants. The increase in ridge height was about $15.9{\pm}1.8mm$ immediately after operation (from 13mm to 19mm). After 6 months operation, ridge height was reduced about $11.5{\pm}13.5%$. After implant installation, average marginal bone loss after 6 months was $0.3{\pm}0.15mm$. Conclusion: Bio-$cera^{TM}$ showed new bone formation similar with Bio-$Oss^{(R)}$ histomorphometrically and appeared to be an effective bone substitute in maxillary sinus augmentation procedure with the residual bone height from 2 to 6mm.

• The korean journal of orthodontics
• /
• v.27 no.2
• /
• pp.297-313
• /
• 1997

The purposes of this study were to compare the soft tissue changes following hard tissue change after surgery between the one jaw and two-jaw surgery in skeletal class III patients and to get the reference of the incisal inclination at presurgical orthodontics. For this study 24 patients for the two-jaw surgery group and 18 patients for one jaw surgery group were selected. Lateral cephalograms were taken at pretreatment, after presurgical orthodontic treatment, immediately after surgical treatment and at least 6 months after surgery. They were traced and analyzed on skeletodental structure and soft tissue. The results were as follows: 1. After surgery, maxilla, maxillary incisors and upper lip were moved anteriorly and superiorly in two-jaw surgery group. Mandible and mandibular incisors were moved posteriorly and superiorly, and thickness of lower lip was increased in both group but there were no statistically significant difference. Anterior facial height was more decreased in two-jaw surgery group (p<0.05). At least 6 months after surgery, by the postorthodontic treatment, maxillary incisors were moved labially 1.44mm, mandible and mandiibular incisors were moved lingually 1.43mrn, 1.26mm respectively in one jaw surgery group. But there was no statistically significant changes of hard tissue in two :jaw surgery group. 2. The correlation coefficients of maxillary hard and soft tissue horizontal changes were high in two jaw surgery group and the ratios for soft tissue to A point were 19% at Sri, 80% at SLS, 82% at LS. The ratios for soft tissue to B point were 92% at LI, 104% at ILS in one jaw surgery group, 89% at LI, 101% at ILS in two-jaw surgery group. 3. The correlation coefficients and change ratios of mandibular incisors and LL HS on lower lip horizontal changes were 0 0.89 and 75%, 85% in one jaw surgery group, 0.93, 0.90 and 76%, 87% in two-jaw surgery group. The correlation coefficients of maxillary incisors and Sn, SLS and LS on upper lip horizontal changes were 072, 0.76 and 0.75 in two jaw surgery group and ratios of changes were 57%, 58% and 59%. 4. The regression equations between skeletal horizontal discrepancy and incisal inclinaton were taken in one jaw surgery group. Those were FMIA=57.48-2.17ANB, U1-SN=-75.02+2.17SNB and $R^2$ were 0.63, 063 respectively. So if there is skeletal horizontal discrepancy by mandibular prognathism in one jaw surgery case, we consider attaining more labial inclination of maxillary incisors than normal and more lingual inclination of mandibular incisors than normal. But correlation coefficient of the regression equations in two jaw surgery group was low, so, that equation was not reliable.

• Development and Reproduction
• /
• v.14 no.4
• /
• pp.269-279
• /
• 2010

Some characteristics of germ cell differntiations and the function of accessory cells during spermatogenesis, and mature sperm ultrastructure in male Protothaca (N.) jedoensis were investigated by transmission electron microscope observations. The morphology of the spermatozoa of this species has a primitive type and is similar to those of other species in the subclass Heterodonta. Accessory cells, which are connected to adjacent germ cells, are involved in the supplying of the nutrients for germ cell development. The morphologies of the sperm nucleus and the acrosome of this species are the cylindrical type and cap shape, respectively. Spermatozoa are approximately $46{\sim}50{\mu}m$ in length including a long sperm nucleus (about $2.44{\mu}m$ in length), an acrosome (about $0.45{\mu}m$ in length), and tail flagellum (about $42{\sim}46{\mu}m$). The axoneme of the sperm tail shows a 9+2 structure. As some characteristics of the acrosomal vesicle structures, the basal and lateral parts of basal rings show electron opaque part (region), while the anterior apex part of the acrosomal vesicle shows electron lucent part (region). These characteristics of the acrosomal vesicle were found in the family Veneridae and other several families in the subclass Heterodonta. These common characteristics of the acrosomal vesicle in the subclass Heterodonta can be used for phylogenetic and systematic analysis as a taxonomic key or a significant tool. The number of mitochondria in the midpiece of the sperm of this species are four, as one of common characteristics appear in most species in the family Veneridae and other families in the subclass Heterodonta. However, exceptionally, only three species in Veneridae of the subclass Heterodonta contain 5 mitochondria. The number of mitochondria in the sperm midpiece can be used for the taxonomic analysis of the family or superfamily levels as a systematic key or an important tool.

• Korean Journal of Veterinary Research
• /
• v.42 no.2
• /
• pp.137-146
• /
• 2002

The immunohistochemical localization of the nerve growth factor (NGF), glial fibrillary acidic protein (GFAP) and ciliary neurotrophic factor (CNIF) in the developing Mongolian gerbil forebrain was investigated by the immunohistochemical and electron microscopy methods. Generally, the NGF specifically recognizes the neurons, the GFAP does the glia, and the CNIF does the motor neurons. This study demonstrates the location of the NGF, GFAP and CNTF in the developing Mongolian gerbil from the embryonic days 17 (E17) to the postnatal weeks 3 (PNW 3). The NGF was localized at E19 in the olfactocy bulb and the cerebral cortex, expanded to the hippocampus, and the diagonal bond from the late prenatal period to PNW 3. GFAP was observed in the lateral ventricle and the third ventricle at E17, projected into the cerebral cortex at E19. The GFAP was observed to have the largest numbers in several parts of the forebrain at the postnatal days 2 (PND2), while the most numerous CNTF was observed at PNW 2. The CNTF-IR cells were observed only in the postnatal days and were found in the olfactory bulb, cerebral cortex both neuron and neuroglia at PND3. Electron microscopy showed that the NGF, GFAP and CNTF were not related to any connections with any particular subcellular structure. These results suggest that NGF, GFAP and CNTF be related to the neuron and neuroglia at the prenatal and postnatal stages in the developing Mongolian gerbil.

• The korean journal of orthodontics
• /
• v.33 no.4 s.99
• /
• pp.293-305
• /
• 2003

The pharynx have significant locations and functions because it forms a part of the unit in which respiration and deglutition are carried out. Because of the closed relationship between the pharynx and the dentofacial and craniofacial structure, many studies are carried out on this subjects. The purpose of this study were to compare the airway size including pharynx, soft palate, tongue and hyoid bone between normal and hyperdivergent skeletal pattern and to evaluate the change of those size in different age. The sample of this study were consisted of 51 subjects in normal group, 52 subjects in hyperdivergent group. Each was divided into two subgroups by age , child group(9-l2yr old) and adult group(18yr old over). The lateral cephalometric radiographs were taken and the distance, angle and ratio of the facial skeleton, pharynx, soft palate, tongue and hyoid bone were measured and evaluated statistically. The result obtained were summarized as follows : 1 SN-Mn angle, FMA, and Pal-Mn angle were significantly larger in child group than adult group, but the lower anterior facial height(LAFH) and facial height ratio(FHR) were significantly smaller in child group than adult group. Occlu-Mn angle was significantly steep in hyperdivergent group than normal, but not significantly different between child group and adult group. 2. Hyperdivergent group and child group had the stronger correlation between SN-Mn angle, FMA, Pal-Mn angle, LAFH and FHR and airway size than normal group and adult group. Hyperdivevgent child group had significant negative correlation between SN-Mn angle, FMA, Pal-Mn angle and sagittal skeletal dimension of nasopharynx and sagittal depth of nasopharyngeal lumen. Significant positive correlation were seen between LAFH and vertical measurement of airway. 3. There was no difference of the linear measurement of airway size between hyperdivergent group and normal group. 4. Adult group had smaller posterior pharyngeal wall, target nasopharyngeal depth longer nasopharyngeal height and longer pharyngeal length than child group. 5. The sagittal measurement of hyoid bone had no difference between child group and adult group. But adult group had larger vertical measurement of hyoid bone than child group.

• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.63-74
• /
• 2006

During the construction of circular underground pipe, the non-proper compaction along the pipe and the decrease of compaction efficiency have been the main problems to induce the failure of underground pipe or facility. The use of CLSM (controlled low strength materials) should be one of the possible applications to overcome those problems. In this research, the full-scaled field test and the numeric analysis using PENTAGON-3D FEM program were carried out for three different cases on the change of backfill materials, including the common sand, the soil from construction site, and the CLSM. From the full-scaled test in field, the use of in-situ CLSM as backfill materials reduced the vertical and lateral deformation of the pipe, as well as the deformation of the ground surface. The main reason for reducing the deformation would be the characteristics of the CLSM, especially self-leveling and self-hardening properties. The measured earth pressure at the surround of the corrugated pipe using the CLSM backfills was the smaller than the other cases, and the absolute value was almost zero. Judging from the full-scaled field test and FEM analysis, the use of CLSM as backfill materials should be one of the best choices reducing the failure of the underground pipes.

• Korean Journal of Ichthyology
• /
• v.32 no.3
• /
• pp.166-181
• /
• 2020

The egg development, early life history and spawning site characters of Korean endemic fish, Coreoleuciscus splendidus (Gobioninae), were investigated at the part of Jo-jong stream in Korea from May 2020. The fertilized eggs were 2.05~2.23 mm (mean, 2.13 mm) in diameter and had no oil globules. The embryo began to hatching about 98 hrs after fertilization under water temperature of 20±1℃. The newly-hatched larvae were 5.03~5.68 mm (mean, 5.31 mm) in total length (TL), and their mouth and anus were not opened. 4 days after hatching, Several rod-like cupulae were observed on the head and lateral side of the body at 6.95~7.89 mm (mean, 7.51 mm). 7 days after hatching, the post-larva stage were 8.39~9.29 mm (mean, 8.78 mm) in total length, and their york were completely absorbed. The cupulae were completely distinguished. They entered the juvenile stage when all fin-rays were formed at 29 days after hatching, and their TL were 14.16~17.04 mm (mean, 14.99 mm). Squamation was initiated on the caudal body at approximately 18.21~23.74 mm (mean, 30.28 mm), 38 days after hatching, and completed at 26.82~33.33 mm (mean, 19.42 mm), 73 days after hatching, the external characteristics from of juveniles were same to adults. The spawning site was characterized by bottom structure of pebble (64~16 mm) and gravel (16~2 mm), environmental conditions of the spawning sites were 6~18 cm in water depth, 0.43~0.73 m/sec in bottom water velocity. In spawning sites, an egg mass or separated eggs were located a small gap of under the pebble and gravel.

• Korean Journal of Ichthyology
• /
• v.6 no.2
• /
• pp.132-159
• /
• 1994

The taxonomic revision of the family Congridae was made based on the specimens collected from the south-western coasts of the Korea from June 1988 to Oct. 1993. The family Congridae was classified into 8 species belonging to 6 genera. based on the external and internal morphological characters : Anago anago, Ariosoma anagodies, Ariosoma shiroanago shiroanago, Conger myriaster, Conger japonicus, Gnathophis nystromi nystromi, Rhechias retrotincta and Uroconger lepturus. Among the species reported as the congrid eels from Korea until now, four species were transferred into different generic or specific name Conger flavirostris into Ariosoma anagoides ; Astroconger myriaster into Conger myriaster ; Congrina retrotincta into Rhechias retrotincta and Rhynchocymba nystromi into Gnathophis nystromi nystromi. A Korean congrid eel, Ariosoma shiroanago shiroanago, was reported for first time in Korea. Intergeneric characters of the family Congridae were the form of the lateralline scales, the state of the tip of tail, the segmented state of the dorsal and anal fin rays, the existance of the supraoccipital bone and of lateral ethmoid process of the skull, the origin of dorsal fin and the forms of upper labial flange. The interspecific classification was made according to the characters such as the numbers of sensory pores of head part and in front of vent, teeth rows and numbers of upper and lower jaw, the numbers of vertebrae, the body color, the shapes of the head part, the color of intestine, the size of eye, the structure of air bladder and the number of branchiostegal rays. A new key on the taxonomical characteristics to the genera and species of the family Congridae has been estabilished and their distribution in Korea is described.

• Journal of the Korean Geosynthetics Society
• /
• v.20 no.4
• /
• pp.85-93
• /
• 2021

The seventy percentage of Korean Peninsular is covered by the mountainous area, and the depth of west sea and south sea is relatively shallow. Therefore, a large scale land reclamation from the sea has been implemented for the construction of industrial complex, residental area, and port and airport facilities. The common problem of reclaimed land is consisted of soft ground, and hence it has low load bearing capacity as well as excessive settlement upon loading on the ground surface. The hollow concrete block has been used to reinforce the loose and soft foundation soil where the medium-high apartment or one-story industrial building is being planned to be built. Recently the earthquakes with the magnitude of 4.0~5.0 have been occurred in the west coastal and southeast coastal areas. Lee (2019) reported the advantages of hollow concrete block reinforced shallow foundation through the static laboratory bearing capacity tests. In this study, the dynamic behavior of hollow concrete block reinforced sandy ground with filling the crushed stone in the hollow space has been investigated by the means of shaking table test with the size of shaking table 1000 mm × 1000 mm. Three types of seismic wave, that is, Ofunato, Hachinohe, Artificial, and two different accelerations (0.154 g, 0.22 g) were applied in the shaking table tests. The horizontal displacement of structure which is situated right above the hollow concrete block reinforced ground was measured by using the LVDT. The relative density of soil ground are varied with 45%, 65%, and 85%, respectively, to investigate the effectiveness of reinforcement by hollow block and measured the magnitude of lateral movement, and compared with the limit value of 0.015h (Building Earthquake Code, 2019). Based on the results of shaking table test for hollow concrete block reinforced sandy ground, honeycell type hollow block gives a large interlocking force due to the filling of crushed stone in the hollow space as well as a great interface friction force by the confining pressure and punching resistance along the inside and outside of hollow concrete block. All these factors are contributed to reduce the great amount of horizontal displacement during the shaking table test. Finally, hollow concrete block reinforced sandy ground for shallow foundation is provided an outstanding reinforced method for medium-high building irrespective of seismic wave and moderate accelerations.

• Economic and Environmental Geology
• /
• v.54 no.6
• /
• pp.717-731
• /
• 2021

We analyzed the characteristics of the habitat environment for the Seonam study area in Ulsan, the southern shore of the East Sea using bathymetry and seafloor environment data. The depth of the study area ranges from about 0 m to 23 m. In the west of the study area, the water depth is shallow with a gentle slope, and the water depth becomes deeper with a steep slope in the east. Due to the right-lateral strike-slip faults located in the continental margin of the East Sea, the fracture surfaces of the seabed rocks are mainly in the N-S direction, which is similar to the direction of the strike faults. Three seafloor types (conglomeratic-grained sandy, coasre-graiend sandy, fine-grained sandy) and rocky bottom area have been classified according to the analyses of the bathymerty, seafloor image, and surface sediment data. The rocky bottom areas are mainly distributed around Seaoam and in the northern and southern coastal area. But the intermediate zone between Seonam and coastal area has no rocky bottom. This intermediate area is expected to have active sedimentation as seawater way. The sandy sediments are widely distributed throughout the study area. Underwater images and UAV images show that Cnidarians, Brachiopods, Mollusks are mostly dominant in the shallow habitat and various Nacellidae, Mytilidae live on the intertidal zone around Seonam. Annelida and Arthropod are dominant in the sandy sediments. The distribution of marine organism in the study area might be greatly influenced by the seafloor type, the composition and particle size distribution of the seafloor sediments. The analysis of habitat environment mapping with bathymetry, seafloor data and underwater images is supposed to contribute to the study of the structure and function of marine ecosystem.