• 한국콘텐츠학회논문지
• /
• 제14권9호
• /
• pp.120-130
• /
• 2014

이 연구는 여성 노인들에게 15주간 라인 댄스 운동 프로그램을 실시하게 한 후 자세 제어와 반응 메커니즘을 관찰할 목적으로 균형성 요인을 분석해 낙상 예방을 위한 운동 중재 효과를 규명하고자 했다. 이를 위해 65세 이상 16명이 선정되었다. 균형성 판단 요인은 정적 직립 상태에서 압력 판에서 25초 서있는 동안 압력 판의 6가지(3방향 힘, 3방향 모멘트) 자료를 수집해 이를 바탕으로 좌우 및 전후 압력중심 변동폭, 이들의 압력 중심 속도, 흔들림 면적을 분석했다. 분석한 결과 라인 댄스 활동 후 전후 압력 중심의 변화 범위(p<.01)와 압력 중심의 평균 속도(p<.05)는 크게 감소를 보였다. 또한 흔들림 면적은 라인댄스 후 유의한 감소를 보였다(p<.001). 좌우 방향의 압력중심 범위와 속도는 큰 감소를 보이지 않았다. 앞으로 이와 유사한 연구를 수행하고자 할 때는 운동 중재 효과를 실제 낙상과 관련해 연구할 필요가 있으며, 또한 균형성 판단 요인을 신체계뿐만 아니라 전정계, 감각계 등을 관찰하는 연구가 필요하리라 본다.

• 대한인간공학회지
• /
• 제24권1호
• /
• pp.1-7
• /
• 2005

This paper investigates the effects of scene movements on cybersickness to develop the guidelines of scene movements in virtual environments. The types of scene movements were made for both scene navigations(through the axes of X: lateral, Y: fore & after, and Z: vertical) and scene rotations(by pitch, roll and yaw). And there were each three levels of speed; 2.7, 4.5 and 6.3 /s(for navigation), and 10, 20 and 30 /s(for rotation) were conducted. Twelve participants were exposed to each scene for 15 minutes, and three tests were performed to measure the degree of sickness. Before and after subjects were exposed to virtual environments, they were requested to describe their sickness symptoms by means of answering the Simulator Sickness Questionnaire(SSQ). And the postural stability tests, in which the Center of Pressure(COP) of subjects were traced and recorded by a 'force platform', were conducted. During the exposure on virtual environments, the subjects were requested to rate the degree of nausea. For both navigation and rotation, the effects of speeds and axes were significant in the SSQ scores and the nausea ratings, while it was not in the COP. The correlation between the SSQ scores and the COP data was not found. Therefore, it was inappropriate to use COP as a measure of cybersickness. The degree of sickness increased, except for the case of the yaw, as the speed increased. The sickness was most severe in the scene navigation through the axis X and in the scene rotation by the yaw.

• 한국지진공학회논문집
• /
• 제20권7_spc호
• /
• pp.453-460
• /
• 2016

The Gyeong-Ju earthquake in the magnitude of 5.8 on the Richter scaleoccurred in September 12, 2016. Because there are many nuclear power plants (NPP) near the epicenter of the Gyeong-Ju earthquake, the seismic stability of nuclear power plants is becoming a social problem. In order to evaluate the safety of seismically isolated NPP, the seismic response of a NPP subjected to the Gyeong-Ju earthquake was compared with those of 30 sets of artificial earthquakes corresponding to the nuclear standard design spectrum (NSDS). A 2-node model and a simple beam-stick model were used for the seismic analysis of seismically isolated NPP structures. Using 2-node model, the effect of internal temperature rise, decrease of shear stiffness, increase of lateral displacement and decrease of vertical stiffness according to nonlinear behavior of lead-rubber bearing (LRB) were evaluated. The displacement response, the acceleration response, and the shear force response of the seismically isolated nuclear containment structure were evaluated using the simple beam-stick model. It can be observed that the seismic responses of the isolated nuclear structure subjected to Gyeong-Ju earthquake is significantly less than those to the artificial earthquakes corresponding to NSDS.

• 콘크리트학회지
• /
• 제9권2호
• /
• pp.167-177
• /
• 1997

모멘트 연성골조의 접합부와 기둥은 적절한 에너지흡수 능력과 구조물의 횡붕괴를 방지하기 위하여 탄성적으로 거동해야 하며, "강한 기둥-약한 보"의 설계개념을 채택하고 있다. 접합부는 골조구조의 취약부분으로 인정되고 있지만 부재설계에서는 접합부를 구성하는 보와 기둥에 의해서 접합부의 치수가 결정되기 때문에 접합부가 부담해야 하는 하중조건과 보강방법을 결정하는데에 어려움이 있다. 또한 콘크리트의 고강도화, 경량화에 의해 부재단면은 작아지게 되고 상대적으로 철근량은 늘어나게 되므로 접합부 영역의 응력부담은 이전보다 훨씬 높아지게 되었다. 따라서 접합부의 적절한 구조성능 확보 및 시공상의 문제점을 개선하기 위하여 접합부의 설계 및 상세에 특별한 주의가 필요하다고 할 수 있다. 이에 본 연구에서는 슬래브의 기여도를 고려한 접합부의 적절한 보강방법을 제시하기 위한 기초자료로서 $\frac{2}{3}$의 실물크기로 4개의 고강도 콘크리트 보-기둥 접합부를 제작하고, 반복하중 실험을 수행하였다.실험을 수행하였다.

• 대한치과교정학회지
• /
• 제34권2호
• /
• pp.153-163
• /
• 2004

II급 부정교합 치료 후 일어나는 재발에 영향을 미치는 요소를 알아보기 위하여 치료 후 결과가 안정하게 유지된 군과 재발이 일어난 군으로 구분하여 골격 및 치성요소를 비교하였다. 치료 전과 치료 후 측모 두부방사선사진을 이용하여 t-test와 상관분석을 시행한 결과 다음과 같은 결론을 얻었다. 1. 안정군과 재발군 간에 치료 전 골격 및 치성 관계는 대체로 차이가 없었다. 2. 안정군에서 하악골의 전방성장이 더 많이 일어났다. 3. 안정군에서의 하악 전치는 더 직립되었으며 상악전치는 설측 경사가 적은 경향을 보였다. 4. 재발군에서 교합평면이 전하방으로 경사되는 경향을 보였다.

• 대한치과교정학회지
• /
• 제46권5호
• /
• pp.301-309
• /
• 2016

Objective: The aim of this study was to evaluate the skeletal and dental changes after intraoral vertical ramus osteotomy (IVRO) with and without presurgical orthodontics by using cone-beam computed tomography (CBCT). Methods: This retrospective cohort study included 24 patients (mean age, 22.1 years) with skeletal Class III malocclusion who underwent bimaxillary surgery with IVRO. The patients were divided into the preorthodontic orthognathic surgery (POGS) group (n = 12) and conventional surgery (CS) group (n = 12). CBCT images acquired preoperatively, 1 month after surgery, and 1 year after surgery were analyzed to compare the intergroup differences in postoperative three-dimensional movements of the maxillary and mandibular landmarks and the changes in lateral cephalometric variables. Results: Baseline demographics (sex and age) were similar between the two groups (6 men and 6 women in each group). During the postsurgical period, the POGS group showed more significant upward movement of the mandible (p < 0.05) than did the CS group. Neither group showed significant transverse movement of any of the skeletal landmarks. Moreover, none of the dental and skeletal variables showed significant intergroup differences 1 year after surgery. Conclusions: Compared with CS, POGS with IVRO resulted in significantly different postsurgical skeletal movement in the mandible. Although both groups showed similar skeletal and dental outcomes at 1 year after surgery, upward movement of the mandible during the postsurgical period should be considered to ensure a more reliable outcome after POGS.

• 대한치과의사협회지
• /
• 제58권2호
• /
• pp.83-92
• /
• 2020

In the anterior maxillary area, dental implants for tooth replacement are challenging due to the need to satisfy high esthetic level as well as functionality. Immediate implant placement and provisionalization can dramatically reduce the edentulous period, and then fulfill patient's demand for esthetics. The aim of present case report is to demonstrate two cases that successfully restored single tooth with immediate implant placement and provisionalization in the anterior maxillary area. A 47 years old female was scheduled to replace her maxillary right central incisor due to crown-root fracture by trauma. Another 54-year-old female was planned to place dental implant following tooth extraction of maxillary right lateral incisor owing to continuous pus discharge despite repetitive treatments including apicoectomy. In these two cases, surgical and prosthetic procedures progressed in a similar way. After minimal flap elevation, atraumatic tooth extraction was performed. Implant was placed in proper 3-dimensional position and angulation with primary stability. Bone graft or guided bone regeneration for peri-implant bone defect was conducted simultaneously. Provisionalization without occlusal loading was carried out at the same day. Each definitive crown was delivered at 7 and 5 months after the surgery. Two cases have been followed uneventfully for 2 to 5 years of loading time. In conclusion, Immediate implant placement and provisionalization could lead to esthetic outcome for single tooth replacement with dental implant under proper case selection.

• 전산구조공학
• /
• 제10권4호
• /
• pp.205-216
• /
• 1997

구속된 ?(restrained warping)효과를 고려하는 박벽 공간뼈대구조의 횡후좌굴거동을 조사하기 위하여 기하학적 비선형 유한요소이론 및 해석법을 제시한다. 가상일의 원리를 이용하여 대변형효과를 고려한 3차원 연속체의 평형방정식으로부터, 구속된 ?효과를 고려하고 유한한 회전각의 2차항의 효과를 포함하는 변위장을 도입하여 초기응력을 받는 박벽 공간뼈대요소의 증분평형방정식을 유도한다. 박벽 공간뼈대구조를 유한요소로 나누고 변위장을 요소변위에 관한 Hermitian 다항식으로 나타내어 이를 평형방정식에 대입함으로써 접선강도행렬을 유도한다. 또한 updated Lagrangian formulation에 근거하여, 증분변위로부터 강체회전변위와 순수변형성분을 분리시켜서 강체회전은 요소의 방향변화를 결정하고, 순수변형은 부재력증분을 산정하는 불평형하중 산정법을 제시한다. 박벽 공간뼈대구조의 횡-비틂좌굴 및 후좌굴 거동에 대한 예제들을 통하여 본 연구에 대한 해석결과와 문헌의 결과를 비교 검토함으로써 본 연구에서 제시된 이론 및 해석방법의 정당성을 입증한다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제34권4호
• /
• pp.468-474
• /
• 2008

Purpose: Previous clinical investigations of sinus floor augmentation have demonstrated repneumatization of grafted sinus. The aim of this study is to evaluate and compare the height changes of sinus floor after grafting with deprotenized bovine bone mineral (DBBM) and beta tricalcium phosphate (TCP). Materials and methods: 34 sinuses in 28 patients were augmented with 100% DBBM or 100% TCP through lateral approaches. Sinusgraft height was measured before, immediately after, and 6 months after bone graft with panoramic radiography. Result: After 6 months, the decreases of graft heights were 14.53% for DBBM group and 15.15% for TCP group. There was no statistically significant difference. Discussion and Conclusion: Long-term stability of sinus-graft height represents an important factor for implant success. After the uses of DBBM and TCP for maxillary sinus floor augmentations, acceptable graft height maintenances were observed.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 춘계 기술심포지움 논문집
• /
• pp.193-197
• /
• 2002

The tribological properties and van der Waals attractive forces and the thermal stability of films are very important characteristics of highly hydrophobic fluorocarbon (FC) films for the long-term reliability of nano system. The effect of thermal annealing on films and van der Waals attractive forces and friction coefficient of films have been investigate d in this study. It was coated Al wafer which was treated O2 and Ar that ocatfluorocyclobutane ($C_4_{8}$) and Ar were supplied to the CVD chamber in the ratio of 2:3 for deposition of FC Films. Static contact angle and dynamic contact angle were used to characterize FC films. Thickness of films was measured by variable angle spectroscopy ellipsometer (VASE). Nanotribological data was got by atomic force microscopy (AFM) to measure roughness, lateral force microscopy (LFM) to measure friction force, and force vs. distance (FD) curve to evaluate adhesion force. FC films were cured in N2 and vacuum. The film showed the slight changes in its properties after 3 hr annealing. FTIR ATR studies showed the decrease of C-F peak intensity in the spectra as the annealing time increased. A significant decrease of film thickness has been observed. The friction force of Al surface was at least thirty times higher than ones with FC films. The adhesive force of bare Al was greater than 100 nN. After deposit FC films adhesive force was decreased to 40 nN. The adhesive force of films was decreased down to 10 nN after 24 hr annealing. During 24 hr annealing in $N_2$and vacuum at $100^{\circ}C$ film properties were not changed so much.