• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 춘계학술발표대회 개요집
• /
• pp.109-111
• /
• 2005

Nuclear fuel assemblies for pressurized water reactors(PWR) are loaded in the reactor core throughout the residence time of three to five years. A spacer grid assembly, which is an interconnected array of slotted grid straps and is welded at the intersections to form an egg crate structure, is one of the main structural components of the nuclear fuel assembly. The spacer grid assembly is structurally required to have enough buckling strength under various kinds of lateral loads acting on the nuclear fuel assembly so as to keep the nuclear fuel assembly straight. To meet this requirement, it is necessary to weld the welding parts carefully and precisely. In this study, laser welding qualities of the spacer grid assembly welded by several welding companies, such as weld strength, weld penetration depth, and weld bead size, are examined and compared.

• 한국터널지하공간학회 논문집
• /
• 제21권1호
• /
• pp.31-48
• /
• 2019

인공동결공법(artificial ground freezing method)은 연약지반 및 도심지에서의 지하구조물 시공에 적합한 차수 및 지반보강 공법이다. 인공동결공법은 동결관(freezing pipe)을 지중에 매설한 후 냉매(refregerant)를 순환시켜 대상 지반에 차수벽 및 지지체의 역할을 수행하는 동결벽체(frozen wall)를 형성한다. 그러나 간극수의 동결에 따른 간극수의 부피팽창은 지반의 변형을 야기시킬 수 있고, 시공완료 후 동결토의 융해에 따른 지반의 소성변형 및 입자의 재배치 등은 지반의 역학적 특성을 변화시킨다. 본 논문에서는 인공동결공법에 따른 해성 점토지반(marine clay)의 동결속도를 평가하기 위하여 인공동결공법 현장실증시험을 수행하였다. 현장실증시험은 지중에 3.2 m 깊이로 매설된 동결관 1공 내로 초저온 냉매인 액화질소를 순환시키는 방법으로 수행되었다. 또한, 원지반과 인공동결공법에 의해 동결/융해된 지반에 대한 피에조 콘 관입시험(piezo cone penetration test, CPTu) 및 공내재하시험(lateral load test, LLT)을 수행함으로써 동결/융해(freezing-thawing)에 따른 해성 점토지반의 강도 및 강성 특성의 변화를 평가하였다. 시험결과, 부피가 약 $2.12m^3$인 원기둥 모양의 동결체를 형성하는데 총 3.5일이 동안 약 11.9 ton의 액화질소가 소요되었다. 동결/융해에 따른 지반의 강도 및 강성 저하는 각각 48.5%, 22.7%로 산정되었다.

• 대한기계학회논문집B
• /
• 제23권5호
• /
• pp.577-586
• /
• 1999

Two problems with jet injection through the cylindrical film cooling hole are 1) penetration of jet into mainstream rather than covering the surface at high blowing rates and 2) nonuniformity of the film cooling effectiveness in the lateral direction. Compound angle injection is employed to reduce those two problems. Compound angle injection increases the film cooling effectiveness and spreads more widely. However, there is still lift off at high blowing rates. Shaped film cooling hole is a possible means to reduce those two problems. Film cooling with the shaped hole is investigated in this study experimentally. Film cooling hole used in present study is a shaped hole with conically enlarged exit and Inlet-to-exit area ratio is 2.55. Naphthalene sublimation method has been employed to study the local heat/mass transfer coefficient and film cooling effectiveness for compound injection angles and various blowing rates around the shaped film cooling hole. Enlarged hole exit area reduces the momentum of the jet at the hole exit and prevents the penetration of injected jet into the mainstream effectively. Hence, higher and more uniform film cooling effectiveness values are obtained even at relatively high blowing rates and the film cooling jet spreads more widely with the shaped film cooling hole. And the injected jet protects the surface effectively at low blowing rates and spreads more widely with the compound angle injections than the axial injection.

• Restorative Dentistry and Endodontics
• /
• 제25권3호
• /
• pp.313-320
• /
• 2000

The purpose of this study was to evaluate on the interfacial morphology between dentin and restorative materials. In this in vitro study, the cavity wall restorated with 3 different kinds of tooth colored restorative materials [resin-modified Glass Ionomer cement (Fuji II LC), composite resin (Z-100), compomer (Dyract)]. The thirty extracted human molar teeth without caries and/or restorations are used. The experimental teeth were randomly divided into three groups of ten teeth each. In each group, Wedge shaped cavities (width: 3mm, length: 2mm, depth: 1.5mm) were prepared at the cementoenamel junction on buccal and lingual surfaces. The adhesive of composite resin were mixed with rhodamine B. Primer of composite resin, Prime & Bond 2.1 of Dyract and liquid of Fuji II LC were mixed with fluorescein. In group 1, the cavity wall was treatment with dentin conditioner, and then restorated with Fuji II LC. In group 2, the cavity wall was treatment with Prime & Bond 2.1 and then restorated with Dyract. In group 3, the cavity wall was etching with 10% maleic acid, applied with primer and bonding agent and then restorated with Z-100. The interface between dentin and restorative materials was observed by fluoresence imaging with a confocal laser scanning microscope. The results were as follows : 1. In Glass ionomer group, adaptation of resin modified Glass-ionomer restoration against cavity wall is tight, but the crack formed inside of restoration were observed. 2. In Dyract group, the penetration of resin tag is shorter and the width of hybrid layer is narrower than composite resin group. 3. In Z-100 group, primer penetrated deeply through dentinal tubule. Also bonding agent was penetrated along the primer, but the penetration length is shorter than primer part, and in 3-D image, the resin tag is conical shape and lateral branch is observed.

• 한국지반환경공학회 논문집
• /
• 제13권2호
• /
• pp.27-39
• /
• 2012

본 연구에서는 고성토사면 위에 시공된 교대가 강우 침투로 측방유동이 발생되었을 경우 이로 인한 교대의 상대변위를 파악하고 적절한 보강대책 및 설계기준을 제안하고자 한다. 먼저 성토사면의 정확한 수치해석을 위해 현장의 성토재인 화강풍화토를 채취하여 비배수 직접전단시험을 통해 함수비(포화도)변화에 따른 강도정수의 변화를 파악하고 표준관입시험 결과를 토대로 탄성계수와 포아송비 등의 지반정수를 산정하였다. 이후 유한요소법을 이용하여 강우 시 교대 교좌부의 측방유동, 말뚝기초의 부재력을 산정하였다. 산정 결과, 교대 교좌부의 측방변위는 8.98cm로 허용변위량 3.0cm보다 약 3배 정도 크게 산정되었다. 측방유동의 보강대책으로 보강토옹벽, 압성토, 말뚝 기초 자체보강(길이 5m 연장보강, 3열 보강, 3열 5m 연장보강) 등에 대해 검토하였다. 그 결과, 말뚝기초를 보강 (3열 5m 연장보강) 하였을 경우 측방유동으로 인한 교대 교좌부의 상대변위는 2.26cm로 허용변위량보다 적었다.

• 한국해양학회지
• /
• 제30권6호
• /
• pp.565-583
• /
• 1995

난수성 eddy의 운동에 있어서 경계면 마찰과 해저지형의 중요성을 연구하기 위하여 비선형 QG-모델이 사용되었다. 수직구조를 나타내는 유선함수의 경험적 직교함수는 순압과 제 1 경압 역학 함수를 표현한다. 이 모델은 10 km ${\times}$ 10 km의 격자간격을 지닌 1000 km ${\times}$ 1000 km으로 구성되어 있고 360일동안 시험하였다. 대한해협을 통한 유입량은 쓰가루해협을 통하여 빠져 나간다. 울릉분지내(평평한 해저지형)에서는 QG방정식의 비선형 이류항과 ${\beta}$-효과사이에 균형이 난수성 eddy를 북쪽으로 이동하게 한다. 대륙사면위에서의 난수성 eddy는 비선형항이 중요하게 작용하지만, 평평한 지형에서는 보조적인 역활을 한다. 해저지형이 변화하는 해역에서 난수성 eddy의 비선형항은 시간의 함수이다. 강한 eddy는 북쪽으로 이동한다. Eddy의 세기가 약해지면, 비선형항과 지형적인 베타효과항이 균형을 이루게 된다. Eddy의 분산과 함께 비선형성이 감소하므로서, 지형적 Rossby파 개념에 의하여 난수성 eddy는 대륙사면을 따라서 남하한다. 수치실험은 난수성 eddy의 운동에 미치는 경계면 마찰의 중요성을 확인하였다. 난수성 eddy의 북쪽 침투거리는 경계면 마찰계수의 감소로 증가하게 된다 아울러 Reynolds number의 감소로 북쪽이동을 방지할 수 있다. 또한 이 난수성 eddy운동과정에 있어서 해저지형이 중요한 역할을 하는 것이 제시되었다.

• 한국지반공학회논문집
• /
• 제20권5호
• /
• pp.127-134
• /
• 2004

본 연구는 RAP공법의 구조물 기초로서의 안정성 및 사용성 확보를 위한 기초연구로써, RAP공법이 적용된 지반의 지지력 및 파괴거동을 실내모형토조시험을 통하여 검토한 것이다. 본 연구에서는 RAP 공법을 구조물 기초로서의 파괴거동을 파악하기 위한 실내모형실험을 수행하였다. 사질토 지반에서 상대밀도별(60%, 70%, 90%), 직경 별(45mm, 60mm, 70mm)로 RAP를 설치한 후 깊이별(5cm, 10cm, 15cm, 20cm, 25cm, 30cm)로 토압계를 각각 RAP에 인접한 곳과 RAP 중심에서 1.0D 떨어진 곳에 설치하여 하중재하 실험을 수행하여 RAP의 지지력 및 파괴거동을 검토하였다. 실험 결과 RAP의 파괴거동은 깊이 5∼10cm(1.0D∼2.0D)에서 최대 횡토압을 받아 일반적인 RAP의 파괴 형태인 Bulging 파괴가 발생하는 것으로 판단되었다. 그리고 RAP에 하중을 가하였을 경우 상대밀도가 낮을 경우에는 RAP의 직경변화가 컸으며 상대밀도가 높을 경우에는 RAP의 직경변화가 작음을 알 수 있었다. 깊이별 횡방향 응력 분포도는 상부에서 횡토압의 영향이 크게 나타났으며 하부로 내려갈수록 작아지는 것을 알 수 있었다.

• 한국환경과학회지
• /
• 제1권2호
• /
• pp.145-155
• /
• 1992

The effect of various supplies of lead singly and in combination with aluminium on growth and chlorophyll biosynthesis was investigated in 7-day-old Vigna anguluris seedlings. Expose to 50 $\mu$N Pb or more drastically reduced root elongation rate. Significant depressions in root growth was observed within 1 day and no recovery of growth was seen over the duration of treatment period. Root elongation decreased depending on the Pb concentrations. Root growth inhibition was stronger than shoot growth inhibition. The initiation of lateral roots appeared to be more sensitive to Pb than the growth of main roots. Inhibition of root and shoot elongation by Pb was lessened by combined exposure of Pb and Al, suggesting that the presence of AA reverse the inhibitory effect of Pb alone. With the histochemical sodium rhodizonate method the rate of Pb uptake was dependent on the Pb concentration and exposure time of the roots to Pb salts. Pb was first deposited on the root surface and then translocated radially in the root cap cells. During a longer Pb administration (up to 72 h) Pb penetration was nonuniform, with accumulation within the cortex or endodermis. There was drastic reduction in chlorophyll content by Pb. The Pb inhibition of chlorophyll synthesis was concentration dependent. 5-Aminolevulinic acid dehydratase (ALAD) activity exhibited distinct inhibition from control. Reduction in chlorophyll content was accompanied by proportional changes in ALAD activity. Chlorophyll content and ALAD activity were less affected by combined exposure of Pb and Al, suggesting that Al has a protective effect against the inhibiting action of Pb on photosynthetic activity.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제1권2호
• /
• pp.145-155
• /
• 1997

The effect of various supplies of lead singly and in combination with aluminium on growth and chlorophyll biosynthesis was investigated in 7-day-old Vigna angularis seedlings. Expose to 50 uM Pb or more drastically reduced root elongation rate. Significant depressions in root growth was observed within 1 day and no recovery of growth was seen over the duration of treatment period. Root elongation decreased depending on the Pb concentrations. Root growth inhibition was stronger than shoot growth inhibition. The initiation of lateral roots appeared to be more sensitive to Pb than the growth of main roots. Inhibition of root and shoot elongation by Pb was lessened by combined exposure of Pb and Al, suggesting that the presence of Al reverse the inhibitory effect of Pb alone. With the histochemical sodium rhodizonate method the rate of Pb uptake was dependent on the Pb concentration and exposure time of the roots to Pb salts. Pb was first deposited on the root surface and then translocated radially in the root cap cells. During a longer Pb administration (up to 72 h) Pb penetration was nonuniform, with accumulation within the cortex or endodermis. There was drastic reduction in chlorophyll content by Pb. The Pb inhibition of chlorophyll synthesis was concentration dependent. $\delta-Aminolevulinic$ acid dehydratase (ALAD) activity exhibited distinct inhibition from control. Reduction in chlorophyll content was accompanied by proportional changes in ALAD activity. Chlorophyll content and ALAD activity were less affected by combined exposure of Pb and Al, suggesting that Al has a protective effect against the inhibiting action of Pb on photosynthetic activity.

• Restorative Dentistry and Endodontics
• /
• 제17권2호
• /
• pp.365-382
• /
• 1992

The purpose of this study was to evaluate the adaptation of filling material to the dentinal walls of root canals with and without smear layer. Fifty extracted upper and lower anterior teeth were selected, and the root canals were instrumented with K - files 1mm short of the apical foramen by step - back method. The teeth were randomly divided into two groups of 25 each : in the group I, smear layers were not removed, and in the group II, smear layers were removed by 15% EDTA solution. Again the two groups 25 teeth were randomly divided into unfilled contol group and filling groups(lateral, ultrasonic, ULTRAFIL, McSpadden compaction group). Upon completion of root canal filling, the teeth were grooved on the both the labial and lingual surfaces and then split with mallet and chisel. Each specimens were examined with JSM - 840 Scanning Electron Microscope (JEOL., Japan). The results were as follows : 1. In the contol group, dentinal tubules of group I couldn't be distinguished in the canal wall, but those of group II appeared to be open and patent. 2. In the filling groups of group I, the tubular penetration of the sealer or gutta percha couldn't be seen, but in the filling groups of group II, it could be seen except McSpadden compaction group. 3. In the filling groups, ULTRAFIL group showed the best adaptation of filling material to root canal wall among the group I, and lateral and ultrasonic condensation group showed the best adaptation of filling material among the group II. McSpadden compaction group showed the worst adaptation in group I, II. 4. Generally, the group II showed better adapation of filling material to root canal wall than the group I.