• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1083-1086
• /
• 2008

In this study, Estimate solutions of ultimate lateral resistances for lateral loaded piles are proposed using cone penetration values, $q_c$ values, as CPT results. Cone penetration values, $q_c$ values measured on clean sand layers, are represented by factors for relative densities, axial stresses, and lateral stresses which are important on analysis of sandy soil layers. Also, these factors are same factors to consider existed estimations of ultimate lateral capacity. In this study, estimation of ultimate lateral capacity for lateral loaded piles using CPT results is proposed, and this estimation is verified by adequate analysis for effective reliability.

• 한국산학기술학회논문지
• /
• 제8권4호
• /
• pp.848-852
• /
• 2007

널말뚝의 관입속도 예측을 위한 해석수단 중 많은 경우에 얕은 근입깊이에 대해서 관입속도를 지나치게 크게 평가하기 때문에 해석법의 신뢰성을 떨어뜨리는 요인으로 작용한다. 본 연구에서는 이러한 해석상의 단점을 보완하고자 널말뚝의 휨진동모델을 정립하고 휨진동에 의해 발생하는 에너지 손실량을 평가하였다. 또한 휨진동에 의한 에너지손실에 따른 진동타입력의 감소를 하중감소계수를 써서 반영하고자 하였다.

• 한국지반공학회논문집
• /
• 제23권12호
• /
• pp.53-60
• /
• 2007

콘관입시험결과를 이용하여 널말뚝의 관입속도를 예측할 수 있는 프로그램을 개발하였다. 특히, 널말뚝의 시공에 따른 자유길이를 고려하여 널말뚝의 횡방향 진동에 따른 에너지 손실량을 정량적으로 평가하고 이를 해석 프로그램에 반영함으로써 초기 관입깊이에 대하여 말뚝의 관입속도를 과대하게 예측하는 것을 극복하고자 하였다. 개발된 프로그램에 의한 관입속도 계산결과를 기존의 현장시험결과와 비교분석하였는데 총 12m의 관입깊이에 대하여 예측한 관입속도값은 실측값의 $47%{\sim}120%$ 범위였으며 관입깊이가 작을수록 실측값과 예측값의 편차는 작았다.

• 터널과지하공간
• /
• 제13권6호
• /
• pp.444-454
• /
• 2003

최근 TBM등의 기계식 터널 굴착에 널리 사용되는 커터 디스크 관입에 의한 암석 파쇄 기술은 커터디스크 관입에 따라 국부적으로 높은 응력이 발생하고 미소균열이 생성 및 전파되는 과정이며, 이러한 현상은 암석의 불균질성에 기인한다. 따라서 본 연구에서는 수치해석적으로 TBM에 의한 파괴 메카니즘을 규명하기 위하여. Weibull 분포함수를 이용하여 암석의 불균질 강도 물성을 고려하였으며, 파괴후 물성 저하를 고려하기 위하여 저감지수를 도입하였다. 본 연구결과로부터 단일 커터 디스크 관입시 측압이 매우 중요한 영향을 미치며, 측압이 작을수록 관입에 저항하는 강도는 약하여 커터 디스크와 접촉하는 면과 수직한 방향으로 파괴가 잘 발생하고 측압이 클수록 암석 표면을 따라 chipping 현상이 잘 나타났다. 또한 두 개의 커터 디스크가 작용하는 경우 파괴영역이 전파되고 상호 연합되어 최종적으로 파괴가 발생하는데, 커터 디스크 간격이 70 mm인 경우가 40 mm와 100 mm인 경우 비해 좋은 파쇄효율을 나타내었다. 이상의 결과로부터 커터 디스크 관입에 의한 암석의 chipping 과정 및 메카니즘의 이해와 TBM 터널 설계를 위한 다양한 검토를 해석적 기법으로서 제시할 수 있을 것으로 기대된다.

• The Korean Journal of Ceramics
• /
• 제5권3호
• /
• pp.270-277
• /
• 1999

The ballistic capability of an alumina-rich oxide armor ceramic against a shaped jet was characterized as a function of penetration depth in a layered target structure. The penetration resistance of the ceramic, based upon the determination of penetration velocity, was not equally realized throughout the depth of penetration. It was abnormally low at an early stage of penetration, followed by a sudden increase to reach ~16GPa thereafter. There was no apparent change in such a profile with respect to the lateral size of the specimen. Based upon 2-D flash x-ray radiography and 3-D Hull code simulation, the feasibility of forming a pressure-induced predamnaged zone in front of the jet tip was speculated to foster an increased penetration velocity in the initial stage penetration, resulting in the diminished penetration resistance. The disappearance of such a predamaged zone with penetration was interpreted to restore the resistance of the ceramic in the later penetration stage.

• Restorative Dentistry and Endodontics
• /
• 제10권1호
• /
• pp.127-134
• /
• 1984

This study was conducted to evaluate the sealing ability of McSpadden technique compared with lateral condensation and Engine reamer technique, and according to the degree of canal enlargement and the use and nonuse of sealer. Seventy single-rooted teeth were divided into 14 groups and each tooth was enlarged and obturated according to the purpose of this study. Obturated teeth were infiltrated by Indian ink and decalcified and cleared. The apical sealing ability was evaluated by measuring the degree of ink penetration into the canal. The results were as follows: 1. All the teeth filled by lateral condensation using gutta-percha cone and sealer proved better in canal sealing ability than McSpadden technique and Engine reamer technique, showing less ink penetration. 2. In the McSpadden technique, there was less ink penetration detected in using the sealer than not. 3. In all of the experimental methods, the difference of the degree of ink penetration according the degree of canal enlargement could not be accepted. 4. There was no significant difference in ink penetration degree between Engine reamer technique using sealer and McSpadden technique without sealer.

• Restorative Dentistry and Endodontics
• /
• 제20권2호
• /
• pp.812-817
• /
• 1995

Endodontically treated teeth are usually restored for crown protection, aesthetics, and prevention of root canal recontamination. Restoration of these teeth, however, often requires intracanal posts. Various depths and techniques have been recommended for the preparation of post space. Therefore the purpose of this study was to evaluate the effect that pst preparation has on the coronal seal by linear dye penetration of root canals obturated by lateral condensation, vertical condensation, and thermafil techniques. Forty canals of roots of incisors and canines were cleaned and shaped with the use of a step-back technique. Thirty canals were obturated, 10 each with lateral, vertical, and thermafil techhniques. Five root canals were obturated without a root canal sealer and served as positive controls. Another five root canals were obturated, and their coronal half was sealed with sticky wax and served as negative controls. The apical 5 to 6mm of the filling materials were exposed to india ink for 48 hours. The depth of dye penetration was measured in all groups and statistically analyzed (ANOVA). The results were as follows. 1. The apical plugs in the thermafil groups had the highest degree of coronal dye leakage. 2. The group filled by vertical condensation technique had the lowest degree of coronal dye leakage. 3. No significant statistical difference was found in the amount of coronal dye leakage in canals filled by lateral condensation versus those filled by the veritcal condensation technique. 4. Significant statistical differences in coronal dye penetration were found between the canals filled by thermafil and those filled by the lateral or vertical condensation techniques (p<0.05).

• 한국가구학회지
• /
• 제19권2호
• /
• pp.137-140
• /
• 2008

This experiment states the ultra pure distilled water penetration depth through ray parenchyma cell in radial direction of Castanea crenata. Heartwood penetration depth was 1.16 times lower than the depth in softwood and that difference was found statistically significant at 75.2 second of penetration. Following go-stop-go cycle, water penetrated in the ray parenchyma cell. At the beginning this speed was high and then it was decreased slowly. Water penetration depth result was compared with alcohol penetration depth. It was found that water penetration in ray parenchyma was found lower than alcohol due to the low surface tension of water.

• 한국가구학회지
• /
• 제18권2호
• /
• pp.111-119
• /
• 2007

An experiment was conducted to know the safranine impregnation distance from surface to inward using 6 different hardwood species. During impregnation, 3 parameters were applied-vacuum, pressure and soaking time. Only vacuum treatment did not increase the permeability of wood. Vacuum followed by pressure increased the penetration depth of safranine in radial, tangential and longitudinal direction. Longitudinal penetration was found easy to impregnate. Comparing with radial and tangential direction, radial penetration was found easy. There was a striking difference among sapwood and heartwood permeability. Safranine input depth was found highest in diffused porous wood rather than in ring porous wood. At increased vacuum and pressure, safranine penetration was found easy.

• 한국가구학회지
• /
• 제18권3호
• /
• pp.243-247
• /
• 2007

An experiment was conducted to observe the safranine penetration depth in radial directions of Populus tomentiglandulosa. Radial penetration was considered from bark to pith. In radial direction, ray parenchyma and intercellular space were considered for the measurement of safranine penetration depth. It was found that sapwood conducted safranine 24.23% higher in radial direction compared with heartwood. Intercellular space conducted safranine 39.27% higher depth compared with ray parenchyma and the penetration depth was 39.41% higher in sapwood compared to heartwood. During safranine penetration, it formed a curvature in the lumen of ray parenchyma. Initially safranine penetration was found high and decreased gradually.