DOI QR코드

DOI QR Code

Predicting Method of Penetration Rate of Sheet Pile Using Cone Penetration Test Result

콘관입시험결과를 이용한 널말뚝의 관입속도 예측기법 개발

  • 이승현 (선문대학교 토목공학과) ;
  • 임남규 (명지대학교 토목환경공학과) ;
  • 김병일 (명지대학교 토목환경공학과)
  • Published : 2007.12.31

Abstract

A program for predicting rate of penetration of sheet pile using cone penetration test results was developed. Especially, energy consumption occurring from lateral vibration of sheet pile was estimated quantitatively in order to overcome overprediction of rate of penetration for shallow depths of pile installation. Penetration rates of pile calculated from developed program were compared with those of field test. Predicted rates of pile penetration for the depths to 12m were $47%{\sim}120%$ of the measured values. As pile penetration depth decreases, the difference between the predicted rate of penetration and the measured rate of penetration decreases.

콘관입시험결과를 이용하여 널말뚝의 관입속도를 예측할 수 있는 프로그램을 개발하였다. 특히, 널말뚝의 시공에 따른 자유길이를 고려하여 널말뚝의 횡방향 진동에 따른 에너지 손실량을 정량적으로 평가하고 이를 해석 프로그램에 반영함으로써 초기 관입깊이에 대하여 말뚝의 관입속도를 과대하게 예측하는 것을 극복하고자 하였다. 개발된 프로그램에 의한 관입속도 계산결과를 기존의 현장시험결과와 비교분석하였는데 총 12m의 관입깊이에 대하여 예측한 관입속도값은 실측값의 $47%{\sim}120%$ 범위였으며 관입깊이가 작을수록 실측값과 예측값의 편차는 작았다.

Keywords

References

  1. Barkan, D. D. (1957), 'Foundation Engineering and Drilling by Vibration Method'. Proceedings of the Fourth International Conference on Soil Mechanics and Foundation Engineering, pp.3-7
  2. Holeyman, A., (1993), An Analytical Model-Based Computer Program to Evaluate the Penetration Speed of Vibratory Driven Sheet Piles, Research report prepared for BBRI, HYPERVlBI, p.23
  3. Vanden Berghe, J-F. (2001), Sand Strength Degradation within the Framework of Vibratory Pile Driving, Ph.D. thesis presented to the Faculty of Applied Science, Universite Chatolique de Louvain., Belgium
  4. Viking, K. (2002), Vibro-driveability, A field Study of Vibratory Driven Sheet Piles in Non-Cohesive Soils, Ph.D. thesis, Div. of Soil and Rock Mechanics, Royal Inst. of Technology, Stockholm, Sweden
  5. Warrington, D.C. (1989), 'Theory and Development of Vibratory Pile Driving Equipment'. Proceedings of the Twenty-First Annual Offihore Technology Conference, Dallas, TX OTC 6030, pp.541-550
  6. Wong, D., O'Neill, M. W., and Vipulanandan, C. (1992), 'Modelling of Vibratory Pile Driving in Sand'. International Journal for numerical and analytical methods in geomechanics, Vol.16, No.4, pp.189-210 https://doi.org/10.1002/nag.1610160303