• 한국강구조학회 논문집
• /
• 제21권5호
• /
• pp.483-492
• /
• 2009

소성영역에서 부재의 강성감소, 휨효과 및 잔류응력의 영향을 고려하면서 극한 한계상태에서 강골조의 거동을 평가하기 위해 개선 소성 힌지법을 이용하여 평면강골조의 비선형해석을 실시하고, 강접 및 반강접 평면강골조의 다양한 모델에 대한 수치해석을 통하여 거동을 평가하는데 목적이 있다. 그리고 상용프로그램을 이용한 해석결과를 이용하여 반강접율의 변화에 따른 골조의 거동을 분석한다.

• Journal of Korean Dental Science
• /
• 제14권1호
• /
• pp.26-31
• /
• 2021

Purpose: This study aimed to find a correlation between the occlusal plane and two reference planes that are frequently used in semi-adjustable articulators. Materials and Methods: Sixty-two males and fifty females with normal articulation were recruited and the lateral cephalograms of these patients were taken. The angles between the Frankfort horizontal (FH) and the occlusal planes, the angles between the gnathologic and the occlusal planes, and the angles between the FH and gnathologic planes were measured on the lateral cephalograms. Result: The mean angles between the FH and the occlusal planes was 8.29°±3.62°, with 8.88°±3.09° and 7.63°±4.10° for male and female patients, respectively. The mean angles between the gnathologic and the occlusal planes was 2.77°±3.62°, and the angle between the FH and the gnathologic planes was 5.52°±3.62°. No significant differences were found in the measured angles between the male and female patients (P>0.05). Conclusion: Different guidance angles may be applied to articulators for prosthodontic restoration, depending on the reference planes that the articulators use.

• Tribology and Lubricants
• /
• 제29권3호
• /
• pp.160-166
• /
• 2013

There is an indispensable need for force calibration for quantitative nanoscale force measurement using atomic force microscopy. Calibrating the normal force is relatively straightforward, whereas doing so for the lateral force is often complicated because of the difficulty in determining the optical lever sensitivity. In particular, the lateral force calibration of a colloidal probe in a liquid environment often has a larger uncertainty as a result of the effects of the epoxy, the location of the colloidal particle on the cantilever, and a decrease in the quality factor. In this work, the lateral force of a colloidal probe using a reference cantilever with a known spring constant was calibrated in a liquid environment. By obtaining the spring constant and the lateral sensitivity at the equator of a spherical colloidal particle, the damage to the bottom surface of the colloidal particle could be eliminated. Further, it was shown that the effect of the contact stiffness on the determination of the lateral spring constant of the cantilever could be minimized. It was concluded that this method can be effectively used for the lateral force calibration of a colloidal probe in a liquid environment.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제36권5호
• /
• pp.375-379
• /
• 2010

Introduction: In the management of dentofacial deformities, variable movement of the maxilla can be made possible by a Le Fort I osteotomy. Posterior impaction of the maxilla necessary for rotation of the maxillomandibular complex enhances the functions and esthetic results. In cases of posterior impaction of the maxilla, an increase in the figure of the occlusal plane angle and incisor inclination can occur. This study reports the relationship between the amount of posterior impaction and the change in the occlusal plane angle and incisor inclination in a Le Fort I osteotomy by preoperative and postoperative lateral cephalograms. Materials and Methods: Twenty patients who had undergone orthognathic surgery in Dong-A University Medical Center participated in this study. Lateral cephalometrics, within 3 weeks prior to surgery and 3 days after surgery, were used for analysis. Pre and postoperative measurements of the occlusal plane angle and incisal inclination based on the Frankfort horizontal (FH) plane were performed. X and Y were defined as the amount of vertical change in the upper incisor tip and the amount of vertical change in the upper first molar mesial cup tip through the operation. The amount of final posterior maxillary impaction was determined by subtracting Y from X, which is the difference in vertical height. According to the amount of posterior maxillary impaction, the change in the occlusal plane angle and incisal inclination was measured. Results: The average posterior maxillary impaction was 2.91 mm and the average change in the occlusal plane angle and incisal inclination was $6.54^{\circ}$after surgery. As a result, each mm of posterior maxillary impaction changed the occlusal plane angle and incisal inclination by $2.25^{\circ}$. Statistically, there was high significance. Two cases were observed: one with the same amount of posterior maxillary impaction performed on both the right and left showing $2.20^{\circ}$, and the other with a different amount of posterior maxillary impaction performed showing $2.35^{\circ}$. In this case, there was no significance difference between the two cases. Conclusion: Each mm of posterior maxillary impaction changes the occlusal plane angle and incisal inclination by an average of $2.25^{\circ}$. In posterior maxillary impaction, there was no significant difference in the amount of change in the occlusal plane angle and incisal inclination regardless of whether there was an equal amount of posterior maxillary impaction on both sides. This study is expected to help in the presurgical orthodontic preparation and presurgical treatment planning.

• Journal of Oral Medicine and Pain
• /
• 제24권4호
• /
• pp.455-466
• /
• 1999

The purpose of this study was to investigate the magnitude of mandibular rotational torque movements in subjects with TMJ sounds, and to analyse correlation between quantitative characteristics of TMJ sounds and mandibular rotational torque movement. Twenty dental college students with TMJ clicking and twenty students without any TMD signs and symptoms were examined by mean of SonoPak and Rotate program of BioPAK system(Bioresearch Inc. MilWaukee, wisconsin, USA) in this study. Mandibular rotational torque movements were recorded and analysed during maximum mouth opening, protrusion, and lateral excursion in frontal and horizontal planes. The obtained results were as follows: 1. On maximum mouth opening, mandibular rotational angle and distance of clicking group were significantly greater than those of control group in frontal plane. (P<0.05). 2. During maximum mouth opening closing, maximum mandibular rotational angle and distance of clicking group were significantly greater than those of control group in frontal plane. (P<0.01). 3. On protrusion, mandibular rotational angle and distance of clickin group were significantly greater than those of control group in horizontal plane. (P<0.05). 4. On lateral excursion, there was no significant difference in mandibular rotational angle and distance between clicking group and control group in frontal and horizontal planes. 5. There were significant correlations between peak amplitude of TMJ sounds and maximum mandibular rotational distance during maximum mouth opening (r=-.481) and mandibular rotational distance on maximum mouth opening (r=-.455) in horizontal plane. 6. There were significant correlations between Above 300/(0-300)Hz ratio of TMJ sounds and mandibular rotational angle (r=-.499) and distance (r=-.457) on maximum mouth opening in frontal plane.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권1호
• /
• pp.58-66
• /
• 2005

Inertial-grade vertical-type and lateral-type differential resonant accelerometers (DRXLs) are designed, fabricated using one process and tested for navigational applications. The accelerometers consist of an out-of-plane (for z-axis) accelerometer and in-plane (for x, y-axes) accelerometers. The sensing principle of the accelerometer is based on gap-sensitive electrostatic stiffness changing effect. It says that the natural frequency of the accelerometer can be changed according to an electrostatic force on the proof mass of the accelerometer. The out-of-plane resonant accelerometer shows bias stability of $2.5{\mu}g$, sensitivity of 70 Hz/g and bandwidth of 100 Hz at resonant frequency of 12 kHz. The in-plane resonant accelerometer shows bias stability of $5.2{\mu}g$, sensitivity of 128 Hz/g and bandwidth of 110 Hz at resonant frequency of 23.4 kHz. The measured performances of two accelerometers are suitable for an application of inertial navigation.

• 대한치과보철학회지
• /
• 제34권3호
• /
• pp.448-456
• /
• 1996

The purpose of this study is to evaluate suitable anterior reference point similar to esthetic reference plane of the patient while transferring the suitable facebow. So those who live in Pusan with the normal occlusal relationship were chosen as subjects. The esthetic reference planes determined by the participants themselves and the superior reference line (anterior reference point) in Hanau & Denar articulator were compared with F-H plane in the standard lateral cephalogram. The results were as follows. 1. The angle between the esthetic reference plane and F-H plane was $2.81{\pm}5.7^{\circ}$. 2. The reference line, 43mm from Beyron point to the edge of the upper incisor, was the reference plane that had the closest paralleled relationship with the esthetic reference plane. 3. Transferring with ear piece type face-bow, the anterior reference point that showed the esthetic reference plane was 17mm below orbitale or 43mm above, the edge of the upper incisor.

• 치과방사선
• /
• 제8권1호
• /
• pp.49-61
• /
• 1978

A study was made to investigate a relationship existing in the dentoskeletal framework and the soft tissue profile around the face, and compare the sexual differences between boys and girls having the normal occlusion in the mixed dentition. The lateral cephalograms were composed of 67 boys aged 10.3 years and 68 girls aged 10.4 years, respectively. By means of the lateral cephalograms, both the hard-and soft tissue structures were simultaneously analyzed, measured and evaluated by introducing the several reference items: S-N plane, palatal plane, mandibular plane, N-A line and A-P line for the dentoskeletal structures and N’-P’line for the soft tissue, and the 21 measuring points for the both structures. The significant findings were as follows: 1. In general the boys showed the larger nasal component dimension than did the girls, but the length and height of nose(N’-Prn and NA-Prn) showed the significant sexual difference among those when evaluated statistically. 2. The lip-thickness was found to be minimal in the region of nasion, greater in the region of pogonion, and much greater in the region of point A in the both sexes, but the only thickness over point A(A-A’) showed the significant sexual difference statistically. 3. The upper and lower lip position were found to be located anteriorly to the esthetic line in the both sexes, but upper lip position showed the significant sexual difference when evaluated statistically. 4. The regions of nose and upper lip had a tendency not to be following the underlying skeletal profile.

• Journal of Oral Medicine and Pain
• /
• 제23권2호
• /
• pp.143-155
• /
• 1998

This study was performed to investigate the factor that might affect mandibualr body rotation. For the study, 115 patients with temporomandibular disorders and 35 dental students without angy signs and symptoms of temporomandibular disorders were randomly selected as the patient group and the contreol group, respectively. Preferred chewing side, Angle' classification, lateral guidance pattern, and affected side were clinically recorded, and the amount of Mandibular body rotational torque movement was measured in wide opening and closure, in right and left excursion with vertical and lateral distance in frontal plane, right and left rotational angel in horizontal and in frontal plane. Masticatory muscle activity of anteriorocclusal contact pattern on maximal hard biting were also observed synchronously with BioEMG and T-Scan , respectively. The observed items were muscle activity of anterior temporalis and superficial masseter, and tooth contact status related to contact number, force, duration, and occlusal unbalance between right and left arch. The data collected were analyzed by SAS statistical program. The results of this study were as follows : 1. Mean value of vertical distance in frontal plane in wide opening and closure was more in control subjects than in patients, but there was no difference for rotational angle. In right excursion, rotational angles were greater in patient group than in control group. 2. Comparison among the subjects by preferred chewing side did not reveal any significant difference, but comparison among patients by affected side showed more rotational amount in bilaterally affected patients than in unilaterally affected patients. 3. Comparison among the subjects by Angle's classification or lateral guidance pattern revealed no difference. There was also no difference between preferred chewing side and contralateral side, and between affected side and contralateral side. 4. Positive correlation in madibular rotational torque movements were observed among vertical distance, total horizontal rotation angle, electromyographic activity of anterior temporalis, tooth contact number, and tooth contact force but total frontal rotation angle almost did not show any correlation with other variables except vertical distance.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권1호
• /
• pp.16-24
• /
• 2021

이 연구에서는 강봉 트러스 시스템으로 보강된 조적벽체의 면내·외 거동에 대한 내진성능을 평가하였다. 강봉 트러스 시스템 보강은 무보강 조적벽체 1면에 2개의 강봉 트러스 시스템 유닛을 배치하였다. 면내 거동에 대한 실험결과는 무보강 조적벽체 및 벽체 1면에 1개의 강봉 트러스 시스템 보강된 조적벽체와 비교하였으며, 면외 거동에 대한 실험결과는 무보강 조적벽체와 비교하였다. 실험 결과, 강봉 트러스 시스템으로 보강된 조적벽체의 면내·외 초기 강성은 무보강 조적벽체에 비해 각각 1.9배 및 2.3배 높았으며, 면내·외 최대 내력은 각각 1.8배 및 1.9배 높았다. 특히 강봉 트러스 시스템으로 보강된 조적벽체의 면내·외 에너지 소산능력은 무보강 조적벽체에 비해 각각 6.1배 및 2.4배 높았으며, 등가 감쇠비는 각각 5.1배 및 1.2배 높았다. 즉, 강봉 트러스 시스템은 무보강 조적벽체의 면내 방향으로의 내진성능 향상뿐만 아니라 면외 방향으로의 내진성능 향상에도 유리할 것으로 판단된다.