• 대한치과교정학회지
• /
• 제46권4호
• /
• pp.199-211
• /
• 2016

Objective: Given the considerable disagreement between the Peer Assessment Rating (PAR) index and the American Board of Orthodontics Cast-Radiograph Evaluation, we aimed to develop a novel assessment system-the Improvement and Completion of Outcome (ICO) index-to evaluate the outcome of orthodontic treatment. Methods: Sixteen criteria from 4 major categories were established to represent the pretreatment malocclusion status, as well as the degree of improvement and level of completion of outcome during/after treatment: dental relationship (arch length discrepancy, irregularity, U1-SN, and IMPA); anteroposterior relationship (overjet, right and left molar position, ANB); vertical relationship (anterior overbite, anterior open-bite, lateral open-bite, SN-MP); and transverse relationship (dental midline discrepancy, chin point deviation, posterior cross-bite, occlusal plane cant). The score for each criterion was defined from 0 or -1 (worst) to 5 (ideal value or normal occlusion) in gradations of 1. The sum of the scores in each category indicates the area and extent of the problems. Improvement and completion percentages were estimated based on the pre- and post-treatment total scores and the maximum total score. If the completion percentage exceeded 80%, treatment outcome was considered successful. Results: Two cases, Class I malocclusion and skeletal Class III malocclusion, are presented to represent the assessment procedure using the ICO index. The difference in the level of improvement and completion of treatment outcome can be clearly explained by using 2 percentage values. Conclusions: Thus, the ICO index enables the evaluation of the quality of orthodontic treatment objectively and consecutively throughout the entire treatment process.

• Earthquakes and Structures
• /
• 제8권2호
• /
• pp.423-442
• /
• 2015

The effects of accidental eccentricity on the seismic response of four-storey steel buildings laterally stabilized by buckling restrained braced frames are studied. The structures have a square, symmetrical footprint, without inherent eccentricity between the center of lateral resistance (CR) and the center of mass (CM). The position of the bracing bents in the buildings was varied to obtain three different levels of torsional sensitivity: low, intermediate and high. The structures were designed in accordance with the seismic design provisions of the 2010 National Building Code of Canada (NBCC). Three different analysis methods were used to account for accidental eccentricity in design: (1) Equivalent Static Procedure with static in-plane torsional moments assuming a mass eccentricity of 10% of the building dimension (ESP); (2) Response Spectrum Analysis with static torsional moments based on 10% of the building dimension (RSA-10); and (3) Response Spectrum Analysis with the CM being displaced by 5% of the building dimension (RSA-5). Time history analyses were performed under a set of eleven two-component historical records. The analyses showed that the ESP and RSA-10 methods can give appropriate results for all three levels of torsional sensitivity. When using the RSA-5 method, adequate performance was also achieved for the low and intermediate torsional sensitivity cases, but the method led to excessive displacements (5-10% storey drifts), near collapse state, for the highly torsionally sensitive structures. These results support the current provisions of NBCC 2010.

• 대한치과보철학회지
• /
• 제36권4호
• /
• pp.533-548
• /
• 1998

The purpose of this study was to investigate the influence of balancing interference on the mandibular movement and masticatory muscle activity. 5 subjects(male. average age of 24.3) without dysfuction in masticatory system were selected. The balancing interference was provided by construction of cast metal crown and onlay on the upper and lower first molars. Clinical examination, changes displacement and velocity, and muscle activity were recorded and analyzed by means of BioPak system(Bioresearch Inc., Milwaukee Wisconsin. USA). The results were as follows ; 1. In clinical examination, various symptoms were reported by all subjects after application of interference. Almost symptoms were subsided after elimination of interference. 2. In the border movements in frontal plane, lateral border movement toward non-interference side was changed according to the interference after application of interference. Immediately after removal of interference, border movements' pattern was recovered as same as before experiment. 3. During gum chewing on the non-interference side, horizontal movement was decreased immediately after application of interference(p<0.05). 1 week after application of interference, horizontal movement was more decreased in 3 subjects and showed a chopping type masticatory stroke. But in 2subjects, horizontal movement was increased to avoid interference. 4. In EMG of the mandibular rest position, no significant changes were showed in the experiment period(p>0.05). 5. During gum chewing on the interference side, the activity of opposite temporal muscle was increased immediately after application of interference(p<0.05). 1 week after application of interference. The activity of ipsilateral temporal muscle and left and right masseter muscles was increased (p<0.05). 1 week after elimination of interference, increased muscle activity was recovered about the same level as before experiment. 6. During gum chewing on the non-interference side, 1 week after application of interference, the activity of ipsilateral temporal muscle was increased (p<0.05). 1 week after elimination of interference. increased muscle activity was returned about the same level as before experiment.

• 대한소아치과학회지
• /
• 제26권1호
• /
• pp.172-184
• /
• 1999

The present study was performed to identify morphologic sub-groupings in Korean children with Class I malocclusions, and to find out anatomic differences between the sub-groups. Standardized lateral cephalometric radiographs of 152 Korean children, aged between 6 and 12 years, with Class I malocclusions were analyzed by the Counterpart Analysis. A statistical method, Ward's Minimum Variance Cluster Analysis, was employed to divide the sample into sub-groups those with similar morphologic characteristics. The results were as follows; 1. There appeared two facial types, Type I and Type II, in Korean children with Class I malocclusions, 48.7% and 51.3%, respectively. 2. In both sub-groups, there existed strong Class III skeletal patterns due to a counterclockwise rotation of the Middle Cranial Fossa alignment, and strong Class II skeletal patterns due to the long Posterior Maxillary vertical dimension and a clockwise rotation of the Ramus alignment. 3. There were no significant differences in Upper Anterior Facial Height between Type I and Type II, $52.6{\pm}2.92mm\;and\;52.8{\pm}3.23mm$, respectively. 4. The Lower Anterior Facial Height in Type II was longer ($66.0{\pm}4.03mm$) due to the long Posterior Maxillary vertical dimension, the clockwise rotation of the Ramus alignment, and a clockwise rotation of the Mandibular plane alignment than that of Type I ($64.2{\pm}4.15mm$).

• 한국정밀공학회지
• /
• 제27권1호
• /
• pp.134-141
• /
• 2010

This study analyzed the regional morphological and mechanical characteristics of vertebrae by using micro-computed tomography (micro-CT) and micro finite element analysis (FEA). For the present study, the $12^{th}$ human thoracic vertebral bones (an 85-years female and a 48-years male) were used. These were scanned by using micro-CT. Structural parameters were evaluated from the acquired 20 image data for fifteen $4{\times}4mm^2$ regions (five regions in respective layers of superior, middle and inferior part) in the thoracic vertebral trabecular bones. $4{\times}4{\times}4mm^3$ cubic finite element models of each regions were created at $70{\mu}m$ voxel resolution to investigate effective modulus ($E^+$). The present study indicated that there were significant differences in morphological and elastic mechanical characteristics of each region. There are close relationship between effective modulus and structural model index (SMI) in the bone of the 48-years male and between effective modulus and bone volume fraction (BV/TV) in the bone of the 85-years female. In addition, the effective modulus of central regions is about 80% stiffer than that of lateral regions at transverse plane. These findings may be likely to explain the previous result that a change of loading distribution of the vertebral trabecular bones is caused by spinal curvature and nucleus pulpous degeneration of the intervertebral disc.

• 콘크리트학회논문집
• /
• 제22권4호
• /
• pp.461-472
• /
• 2010

이 논문은 새로운 수직 접합부를 가진 프리캐스트 벽체의 거동에 관한 연구이다. PC 벽체를 이용한 리모델링 건설을 위해서는 효율적이고 경제적인 조립 방법이 필요하다. C형 수직 접합부를 가진 PC 벽체 시스템은 수직방향의 벽체 사이의 휨모멘트를 전달하도록 하고, 반면에 벽체 중심에 있는 전단키는 전단력을 부담하도록 하였다. 제안된 수직 접합부는 벽체 단부에 서로 다른 방향의 슬롯 때문에 조립이 용이하다. 횡력을 받는 일자형 PC 벽체 시스템을 강성, 강도 그리고 파괴 모드에 대해 기존의 RC 벽체와 비교하였으며, 힘과 처짐과의 관계와 접합부의 조기파괴에 관해 알아보았다. 실험 결과 벽체 단부에 설치된 수직 철근이 먼저 항복하였고, 최종 변형은 접합부의 조기 파괴에 의해 결정되었다. 그리고 벽체에서 효과적인 전단력 전달을 위한 대각선 철근은 그다지 효과적이지 않았다. 단면 해석을 통해 구한 강도와 변형은 실험값과 대체로 일치하였다. 특히, 개폐거동에 의한 변형이 가장 큰 비율을 차지하였다.

• 패션비즈니스
• /
• 제10권5호
• /
• pp.159-179
• /
• 2006

This research checked about the necessity for the development of men's dress forms in the first investigation for the educational circle and the men's wear industry. Somatotype characteristics were analyzed in the second investigation of body measurement with the subjects of 200 male adults in their twenties residing in Busan. The following are the results of the present research to develop male dress forms for patternmaking: 1. In the group analysis for the characterization of front body types, three somatotypes were found and named H, Semi X, and Y. In the cluster analysis of side body types, four types were identified: D, I, d, and q. In the combination of front and lateral body types, four kinds were chosen: semi X-I, semi X-q, semi Y-I, and Y-q. 2. Through the comparison of plane figures by the plaster method as well as horizontal and vertical cross sections by the sliding gauge method, semi X-I was finally chosen as the standard somatotype for male dress form development. 3. Compared with the sliding gauge method of the present dress forms, the research dress form reflected better the shapes of the parts of the back and hips and the position of the waist, especially for males in their 20's. In addition, the dress form in the current research had superior points in all the items of clothing evaluation. Based on the above results, the sizes and models of the men's dress forms for patternmaking were developed.

• 한국전산구조공학회논문집
• /
• 제20권5호
• /
• pp.565-572
• /
• 2007

본 논문에서는 S60MC-C 선박용 다실린더 엔진의 구조해석을 위한 기구학적인 분석에 대해 서술하였다. 구조해석을 위해 프레임박스에 작용하는 측력과 크랭크 저널베어링에 작용하는 반력이 필요하다. 각각의 동적인 작용력을 구하기 위해, 선박용 엔진 내부의 구동부를 마찰이 없는 평판의 운동으로 가정하고, 단실린더에 대해 동역학적인 평형관계를 이용하여 엔진 구동시의 크랭크 각도별 작용력을 구하였다. 단실린더에서의 하중조건을 바탕으로 특정 시점에서 각각의 실린더에 작용하는 하중을 구하기 위해 크랭크암의 각도의 차이를 이용하였다. 구조해석을 위해 프레임박스의 응력 변화에 큰 영향을 줄 것으로 판단되는 8개의 각도를 선정하였다.

• 한국제4기학회지
• /
• 제18권2호통권23호
• /
• pp.5-16
• /
• 2004

The geomorphic deformation of the alluvial fans by tectonic movement was investigated along the lineaments of the northem part of the Ulsan(Bulguksa) fault system. Based on the aerial photographs interpretation and field surveys Ulsan fault system was identified as an active reverse fault which has displaced the Quatemary fan deposits. Buguksa fault system strikes for the direction of NW-SE and N-S. These two lineaments of active fault are crossing at Jinty village in Gyeongju city and the fault plane forms here almost vertical dip. The lateral pressures from the two directions have possibly influenced on the formation of the vertical dip at jinty villagy. It should be resulted from that the two pressures responsible for the active reverse fault at which the one with the NW-SE strike thrusts the hanging wall of Tohamsan block southwestward and the other pressure with the N-S strike thrusts it westward over the foot wall of the fan deposits. The marine oxygen isotope stage 8(0.30-0.25 Ma. BP) and stage 6(0.20-0.14 Ma. BP) are presumed to be the ages of high and middle surfaces of the alluvial fan, repectively. The vertical displacements on the high surfaces along the Bulguksa fault system are about 1.05 m at Ha-Dong, 9.5-10.5 m at Jinhyun-Dong, and about 10 m high at Jinty village. And the vertical displacement on the middle surface was measured about 6 m high at Ha-Dong. The average slip rate of vertical displacements is calculated about 0.03-0.43 mm/y.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제18권3호
• /
• pp.470-487
• /
• 1996

The purpose of this study was to investigate the dynamic response of the mandible to impact and provide insight into the fracture mechanism of the mandible, by 3-dimensional finite element method. The finite element model of the mandible was developed and calculated using NASTRAN/XL (MSC co. U.S.A.) and the linear dynamic transient analysis was performed according to the impulsive force direction, force type and impulse time to the mandible. At first, the load was applied on the mandibular symphysis, body, angle and subcondylar area in the horizontal mandibular plane and the computed stress-time histories at 14 locations of the mandible were obtained. Secondly, the impulsive force was directed to the symphyseal area with changing the force magnitude and impulse time, and calculated the node displacement at 8 locations of mandible. The conclusions from from this study were as follows. 1. The appearance of impulsive energy transmission was different to the direction of impulse to the mandible. 2. The impulsive stress and deformation were larger in lingual or medial side than buccal or lateral in the mandible. 3. The velocity, appearance of energy transmission and the fracture pattern in mandible were affected rather impulse time than force. 4. The horizontal impact to the one side of mandible did not have effect on the stress and displacement of contralateral mandible. From the above results, fracture pattern in symphysis can be showed as simple or comminuted, multiple or associated in body and angle and solitary in subcondyle area.