• The Korean Journal of Physiology
• /
• v.23 no.1
• /
• pp.139-149
• /
• 1989

Although tail flick reflex (TFR) in rats has been used as a classic model of the nociceptive test to evaluate the action of analgesics, there have been few studies on the origin of the latent period of TFR. Present study was performed to elucidate the mechanism of increase in latency of TFR by morphine in anesthetized rats. Tail skin and dorsolateral tail nerve were stimulated electrically and EMG activities were recorded from abductor caudae dorsalis muscle participating in tail flick reflex. In the case of noxious radiant heat stimulation to tail, the tail flick tension was recorded before and after administration of morphine. Then changes in latency and conduction velocity of peripheral nerve were evaluated. The results obtained were as follows: 1) The latencies of TFR evoked by the electrical stimulation of tail skin and dorsolateral tail nerve were all within 40 ms and were elongated by several milliseconds from control after the administration of morphine. Peripheral conduction velocities of tail flick afferent nerve were within the range of 10-25 m/s. 2) The conduction velocity of peripheral nerve was significantly reduced after morphine administration, therefore the afferent time (utilization time+conduction time to spinal cord) was significantly increased. But the time for central delay and efferent time was not affected by morphine. 3) The conduction velocity under room temperature $(20-25^{\circ}C)$ was significantly reduced after morphine while that under vasodilation state $(40{\sim}42^{\circ}C)$ increased, 30 min and 45 min after morphine. The conduction velocity under vasodilation state without treatment of morphine increased continuously 4) The latency in tension response of TFR evoked by electrical stimulation was elongated by several milliseconds from control while the latency evoked by noxious radiant heat was elongated by several seconds compared with that of control. From the above results, it could be concluded that: 1) the increased latency of TFR evoked by electrical stimulation of the tail after morphine administration was due to the reducton in conduction velocity of peripheral nerve, which was the secondry effect of morphine on the peripheral vasomotion and 2) increased latency of TFR evoked by noxious radiant heat was also due to the same effect of morphine and the increase in cutaneous insulation to the noxious heat.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.4
• /
• pp.113-122
• /
• 2018

Thermal stress of pigs causes decreased feed consumption and weight gain rate, immunosuppression, reproductive disorders, and increased mortality. The concept of the temperature-humidity index (THI) has been widely used to evaluate the degree of thermal stress of pigs. However, use of this concept is strongly restricted for animals living in the enclosed facilities. In this study, Building Energy Simulation (BES) technique was used to realize the energy flow among outside weather conditions, building materials, and animals. Especially, mechanisms of sensible and latent heat generation from pigs according to surrounding air temperature and their weight were designed to accurately evaluate the THI values inside the pig house. The THI values computed by the BES model were compared to those calculated by method of the report (NIAS, 2016), the model of this study predicted the start date of heat stress about 9~76 days earlier compared to the NIAS model. Results of the BES model also showed higher frequencies of the THI above the THI threshold for pigs, indicating that conventional model has a possibility of underestimating the degree of heat stress of pigs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.86-92
• /
• 2016

A high-capacity battery installed in a hybrid vehicle or electric vehicle is used to power, or as a power supply for, electric sub-assemblies. In order to use a high-capacity battery as a power supply for electric sub-assemblies, such as an electronic control unit or for lighting, radio, and navigation, there is a need for a DC converter that changes a high voltage of 240-400V to a low voltage of 12-14V, which is done with a low-voltage DC-DC converter (LDC). An LDC undergoes long-term aging so as to reduce latent defects in the production process. With regard to the usual aging method, an LDC is a DC-DC converter. So, a DC power supply is connected and used as input, and a programmable DC electronic load is the output. For stable operation, a product having a larger capacity by 10% (compared to an LDC) is used, and has a structure where electric power is dissipated into 100% heat. So, there is a problem with volume, based on the use of two pieces of equipment to test the LDC, and another problem based on the generation of heat in the programmable DC electronic load. Hence, this paper suggests a load test method as a way of recycling, where a significant portion of the electricity dissipated as heat in a load tester is returned as input. The method realizes savings of 80% or more in the electricity dissipated as heat through improvement in the efficiency of the recycling load tester.

• Korean Journal of Food Science and Technology
• /
• v.43 no.2
• /
• pp.176-181
• /
• 2011

Cronobacter sakazakii and Salmonella enterica Typhimurium are hazardous pathogens, especially for ready-toeat foods. For control of pathogens, the virulent bacteriophages were isolated, identified, and applied to infant formula milk and vegetable juice. The phages were isolated from swine feces and identified by morphology and molecular characteristics. ES2 phage for C. sakazakii and ST2 phage for S enterica Typhimurium were identified as Myoviridae and Siphoviridae, respectively. Their burst sizes were $52{\pm}5PFU/cell$ for ES2 phage and $21{\pm}3PFU/cell$ for ST2 phage after latent period of 30-40 minutes. ST2 phage showed higher heat stability at $60^{\circ}C$ than ES2 phage. ES2 phage held the growth of C. sakazakii untill 6 hr afterwhich the number decreased when applied to the infant formula milk and vegetable juice. ST2 phage also showed growth inhibition so that the number of S. enterica Typhimurium decreased. Therefore, virulent bacteriophages might be an agent for the growth inhibition of C. sakazakii and S. enterica Typhimurium in such the ready-to-eat foods.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.9 no.2
• /
• pp.171-179
• /
• 1997

During the day time in summer, peak of air conditing load, and electric power management system lies under overloaded condition. The reason is the enlarged peak load value of electric power caused by increased air-cooling load in summer. To prevent load concentration during day time and overloaded condition of power management system, some energy storage methods are suggested. One of these methods is ice storage system. Water has some good properties as P.C.M.(Phase Chang Material) : Its melting point is the range of required operation temperature. It has large specific latent heat and is chemically stable compared to other organic or inorganic substances. It is cheap and easy to treat. This study represents experimental results of heat transfer characteristics of P.C.M. under the outward melting process in a vertical cylinder. We experimented with twelve combinations of conditions, i.e., three different inlet temperatures($7^{\circ}C,\;4^{\circ}C\;and\;1^{\circ}C$), two working fluid directions(upward and downward), and two aspect ratios, H/R(4 and 2). At the inlet temperature of $7^{\circ}C$ and $4^{\circ}C$, there was temperature stagnation region where the temperature of P.C.M. remains constant at $4^{\circ}C$ regardless of aspect ratio and direction of working fluid. This temperature stagnation occurs as the water, at its maximum density, flows down to the lower region. The phase change interface formed bell-shaped curve as the melting process continued. With a new set of conditions(4H/R, inlet temperature $4^{\circ}C$ and $1^{\circ}C$, downward/upwerd inlet direction), the movement of phase change interface was faster when the working flued inlet direction was downward. With the same set of conditions, melting rate and total melting energy were larger when the working fluid inlet direction was downward. The results were reversed when the other sets of conditions were applied.

• Korean Journal of Soil Science and Fertilizer
• /
• v.23 no.2
• /
• pp.94-99
• /
• 1990

A field experiment was conducted to study seasonal evapotranspiration above soybean canopy and its relationship with dry matter production by the Bowen ratio-energy balance method. The soybean "Paldalkong" was sown with the space of $47{\times}10cm$ at Suwon on May 27, 1988. The daily net radiation ranged from 59 to 76 percents of the total shortwave radiation under cloudless conditions, which was lower than cloud overcast condition with recorded 63 to 83 percents. The latent heat flux under overcast condition was sometimes larger than the sum of net radiation, implying transportation of energy by advection of ambient air. The linear relationship was obtained between daily or daytime net radiation and evapotranspiration. The evapotranspiration calculated by Bowen ratio-energy balance method was about 150 percent of class A pan evaporation during the growing season. The total solar radiation from June 20 to August 27 was $1043MJm^{-2}$. The 85 percent of the total shortwave radiation was used for evaporative heat. The dry matter production within the period was $836gm^{-2}$ and the water use efficiency was $2.31gDM\;kg^{-1}\;H_2O$.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1B
• /
• pp.29-36
• /
• 2011

Evapotranspiration (ET) from the various surfaces needs to be understood because it is a crucial hydrological factor to grasp interaction between the land surface and the atmosphere. A traditional way of estimating it, which is calculating it empirically using lysimeter and pan evaporation observations, has a limitation that the measurements represent only point values. However, these measurements cannot describe ET because it is easily affected by outer circumstances. Thus, remote sensing technology was applied to estimate spatial distribution of ET. In this study, we estimated major components of energy balance method (i.e. net radiation flux, soil heat flux, sensible heat flux, and latent heat flux) and ET as a map using Mapping Evapo-Transpiration with Internalized Calibration (METRIC) satellite-based image processing model. This model was run using Landsat imagery of Gyeongan watershed in Korea on Feb 1, 2003 and Sep 13, 2006. Basic statistical analyses were also conducted. The estimated mean daily ETs had respectively 22% and 11% of errors with pan evaporation data acquired from the Suwon Weather Station. This result represented similar distribution compared with previous studies and confirmed that the METRIC algorithm had high reliability in the watershed. In addition, ET distribution of each land use type was separately examined. As a result, it was identified that vegetation density had dominant impacts on distribution of ET. Seasonally, ET in a growing season represented significantly higher than in a dormant season due to more active transpiration. The ET maps will be useful to analyze how ET behaves along with the circumstantial conditions; land cover classification, vegetation density, elevation, topography.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.12
• /
• pp.1013-1019
• /
• 2014

Solid-liquid Phase Change Material(PCM) as a thermal control hardware for the electro-optical payload of low earth orbit satellite is numerically studied which can be substituted with Thermal Buffer Mass(TBM). The electro-optical module in LEO satellite is periodically work and high heat is dissipated during the imaging period, however, the design temperature range is very tight and sensitive. In order to handle this problem TBM is added and as a result the time constant of the module temperature increases. TBM is made of Al6010 and its mass directly affects the system design. To save the mass PCM is suggested in this study. The latent heat of melting or solidification is very high and small amount of PCM can play a role instead of TBM. The result shows that only 12% of TBM mass is enough to control the module temperature using PCM.

• Journal of the Korean Institute of Gas
• /
• v.7 no.2 s.19
• /
• pp.22-32
• /
• 2003

Al-brass material is generally used at the state of plastic deformation, for example; bending, extension of bell mouth at shell and tube type heat exchanger. And SCC(stress corrosion cracking) of Al-brass material will be affected by residual stress as plastic deformation. SCC results from synergism between mechanical factor and corrosion environment. Mechanical factor is stress that directly relates with stress intensity factor at the crack tip. This paper was studied on the effect of stress on SCC of Al-brass tube under in $3.5\%$ NaCl. + $0.1\%\;NH_4OH$ solution by constant displacement tester. Increasing of acidified water flow into sea and speeds up corrosion rate of Al-brass which is used as a tube material of vessel heat exchanger by polluted coast seawater. The experimental results are as follow The latent time of SCC occurrence gets longer as the initial stress intensity factor($K_{Ii}$) gets lower The main crack was propagated as the initial stress intensity factor($K_{Ii}$) gets higher, and secondary cracks occurred by electro-chemical factor a(ter stage of released stress. Dezincification phase showed around the crack, and the range of dezincification gets wider as the initial stress intensity factor($K_{Ii}$) gets higher.

• Proceedings of KOSOMES biannual meeting
• /
• 2008.05a
• /
• pp.185-189
• /
• 2008

This study was conducted to find out the effects of relationship between ocean conditions and snowfall when cold and dry continental air mass passes through the West Sea of Korea. Route of continental high atmospheric pressure can cause effect on snowfall at the west regions (Inchoen, Gunsan, Mokpo) of the Korean Peninsula. The continental high atmospheric pressure extend from the southern China to western coastal region of the Korean Peninsula during the December, and it extend from the north side of China through Bohai Sea and Yodong Peninsula to central area of the Korean Peninsula during the February. Therefore, more snowfall recorded in Incheon is higher during Feb. than Dec.. whereas Gunsan and Mokpo is the opposite. The heavy snowfall at the western coastal region of Korea was caused by loss of the heat from the ocean to air when it's higher than $100W/m^2$. the heavy snowfall was also observed when the arrangement of continental high atmospheric pressure and low pressure was high at the West and low at the East, which formed a front in West and when the wind blow from the North or North West at the speed of $4\sim8m/sec$. There were not much relation between salinity in the western sea and snowfall in the western coastal region of Korea.