• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5A
• /
• pp.457-465
• /
• 2010

When a sensor network is used for monitoring environments in large area or transmitting information in a u-City the number of nodes becomes very large. One of the problems with this application is the increased time delay, especially in reverse direction. In this paper, we propose a new algorithm that can minimize the latency of reverse packet in large sensor network. Analysis shows that the proposed scheme can reduce the latency by more than 90% when compared to Zigbee, while the energy consumption is maintained.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.05a
• /
• pp.44-47
• /
• 2018

시계열 데이터 처리를 위해 방대한 양의 데이터를 스토리지에서 빠르게 읽어와 처리하려는 움직임이 많아지고 있다. 이를 위해 스토리지의 read latency 를 개선하기 위한 여러 기법들이 제안되었지만, 이 기법들은 분산 노드의 스토리지 자원을 충분히 활용하지 못한다는 한계가 있다. 따라서 우리는 시계열 데이터를 실시간으로 처리하기 위해 스토리지에 병렬적으로 접근하여 read latency 를 개선하는 기법을 제안한다. 제안된 기법은 분산 환경에서 스토리지에 병렬적으로 접근하여, 각 노드에서 부분적으로 데이터를 읽어와 전체 데이터를 읽어오는 지연시간을 줄인다. 우리는 제안된 기법을 여러 노드로 구성된 분산 환경에서 구현하였다. 제안된 기법을 적용한 결과, 전체 데이터를 읽어오는 read latency 가 기존 기법보다 28.04% 줄어든 것을 확인하였다.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.14 no.2
• /
• pp.63-69
• /
• 2019

Recently, ultra-low latency flash storage devices such as Z-SSD and Optane SSD were introduced with the significant technological improvement in the storage devices which provide much faster response time than today's other NVMe SSDs. With such ultra-low latency, $10{\mu}s$, storage devices the cost of context switch could be an overhead during interrupt-driven I/O completion process. As an interrupt-driven I/O completion process could bring an interrupt handling overhead, polling or hybrid-polling for the I/O completion is known to perform better. In this paper, we analyze tail latency problem in a polling process caused by process scheduling in data center environment where multiple applications run simultaneously under one system and we introduce our adaptive polling selection technique which dynamically selects efficient processing method between two techniques according to the system's conditions.

• Journal of Communications and Networks
• /
• v.17 no.3
• /
• pp.286-295
• /
• 2015

Avionic databuses fulfill a critical function in the connection and communication of aircraft components and functions such as flight-control, navigation, and monitoring. Ethernet-based avionic databuses have become the mainstream for large aircraft owning to their advantages of full-duplex communication with high bandwidth, low latency, low packet-loss, and low cost. As a new generation aviation network communication standard, avionics full-duplex switched ethernet (AFDX) adopted concepts from the telecom standard, asynchronous transfer mode (ATM). In this technology, the switches are the key devices influencing the overall performance. This paper reviews the avionic databus with emphasis on the switch architecture classifications. Based on a comparison, analysis, and discussion of the different switch architectures, we propose a new avionic switch design based on a time-division switch fabric for high flexibility and scalability. This also merges the design concept of space-partition switch fabric to achieve reliability and predictability. The new switch architecture, called space partitioned shared memory switch (SPSMS), isolates the memory space for each output port. This can reduce the competition for resources and avoid conflicts, decrease the packet forwarding latency through the switch, and reduce the packet loss rate. A simulation of the architecture with optimized network engineering tools (OPNET) confirms the efficiency and significant performance improvement over a classic shared memory switch, in terms of overall packet latency, queuing delay, and queue size.

• The Korean Journal of Pain
• /
• v.18 no.1
• /
• pp.10-14
• /
• 2005

Background: Previous studies have suggested synergistic analgesic drug interactions between NSAIDs and opioids in neuropathic and inflammatory pain models. The aim of this study was to investigate the analgesic drug interaction between intraperitoneal (IP) ketorolac and morphine in radiant thermal stimulation rat. Methods: Initially, we assessed the withdrawal latency time of the hindpaw to radiant thermal stimulation every 15 min for 1 hour and every 30 min for next 1 hour after IP normal saline 5 ml (control group). The latency time was changed into percent maximal possible effect (%MPE). Next, IP dose response curves were established for the %MPE of morphine (0.3, 1, 3, 10 mg/kg) and ketorolac (3, 10, 30 mg/kg) to obtain the $ED_{50}$ for each agent. And we confirmed that the IP morphine effect was induced by opioid receptor through IP morphine followed by IP naloxone. At last, we injected three doses of IP ketorolac (3, 10, 30 mg/kg) mixed with one dose of morphine (2 mg/kg) for fixed dose analysis. Results: IP morphine delayed the paw withdrawal latency time dose dependently, but not ketorolac. $ED_{50}$ of IP morphine was 2.1 mg/kg. And the IP morphine effect was reversed to control level by IP naloxone. IP ketorolac + morphine combination showed no further additional effects on paw withdrawal latency time over morphine only group. Conclusions: IP ketorolac did not produce antinociceptive effect during radiant thermal stimulation. There was neither additional nor synergistic analgesic interaction between IP morphine and ketorolac in thermal stimulation rat.

• ETRI Journal
• /
• v.27 no.5
• /
• pp.525-532
• /
• 2005

In this paper, we propose and present implementation results of a high-speed turbo decoding algorithm. The latency caused by (de)interleaving and iterative decoding in a conventional maximum a posteriori turbo decoder can be dramatically reduced with the proposed design. The source of the latency reduction is from the combination of the radix-4, center to top, parallel decoding, and early-stop algorithms. This reduced latency enables the use of the turbo decoder as a forward error correction scheme in real-time wireless communication services. The proposed scheme results in a slight degradation in bit error rate performance for large block sizes because the effective interleaver size in a radix-4 implementation is reduced to half, relative to the conventional method. To prove the latency reduction, we implemented the proposed scheme on a field-programmable gate array and compared its decoding speed with that of a conventional decoder. The results show an improvement of at least five fold for a single iteration of turbo decoding.

• The KIPS Transactions:PartC
• /
• v.14C no.2
• /
• pp.155-162
• /
• 2007

WFQ (Weighted Fair Queuing) is the most popular fair queuing algorithm, but it had the inherent drawback of a poor bandwidth utilization, particularly under the traffic requiring a low rate but tight delay bound such as internet phone, It was recently identified that the poor utilization is mainly due to non optimized latency of a flow and then LOFQ(Latency-Optimized Fair Queuing) to overcome the drawback was introduced, LOFQ was also improved through introducing an occupied resource optimization function and the implementation complexity of recursive resource transformation was reduced with revising the transformation scheme. However, the performance of LOFQ has been evaluated by means of simulation, so that there are some difficulties in evaluating the performance in the terms of the accuracy and evaluation time, In this paper, we develop how to analytically compute the bandwidth utilization in LOFQ.

• ETRI Journal
• /
• v.32 no.4
• /
• pp.493-502
• /
• 2010

The operation time of an encoder is one of the critical implementation issues for satisfying the timing requirements of Long Term Evolution (LTE) systems because the encoder is based on binary operations. In this paper, we propose a design and implementation of a latency efficient encoder for LTE systems. By virtue of 8-bit parallel processing of the cyclic redundancy checking attachment, code block (CB) segmentation, and a parallel processor, we are able to construct engines for turbo codings and rate matchings of each CB in a parallel fashion. Experimental results illustrate that although the total area and clock period of the proposed scheme are 19% and 6% larger than those of a conventional method based on a serial scheme, respectively, our parallel structure decreases the latency by about 32% to 65% compared with a serial structure. In particular, our approach is more latency efficient when the encoder processes a number of CBs. In addition, we apply the proposed scheme to a real system based on LTE, so that the timing requirement for ACK/NACK transmission is met by employing the encoder based on the parallel structure.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.8
• /
• pp.34-42
• /
• 2009

Mobile communication traffic is changing from voice to data/internet, e.g. wireless internet access, SMS/MMS. more and more. Therefore many data services are coming out over 3G, Mobile WiMAX(WIBRO), LTE etc. Wireless internet market is growing and MIPv6 is more important and many protocols being studied and developed from MIPv6 to Fast MIPv6, Hierachical MIPv6, Proxy MIPv6, etc. The significant factor over MIPv6 is Hand-over latency and Packet-loss PMIPv6 is efficient for reducing mobility related messages and hand-over latency, but it considers single LMA domain. If mobile node is moving inter-LMAs, hand-over delay time affects the real-time communications. To overcome this hand-over delay, we propose present and new enhanced schemes and analize the performance and show the results.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.23 no.4
• /
• pp.324-331
• /
• 2001

The present study was aimed to investigate the effects of latency period on alveolar ridge distraction using the intraoral distraction device. Nine adult mongrel dogs of either sex, weighing about 15kg, were used. They were divided into 3-day, 5-day, and 7-day groups according to the latency period. The left upper and lower premolars and first molars were extracted. Twelve weeks after the extraction, an osteotomy was performed and the distraction device was applied. After the latency period, the distraction was applied at a rate of 1.2mm for 8 days. The distraction device was left in place for 2 weeks to allow consolidation and was then removed. The animals were sacrified at 8 weeks after completion of distraction and were examined macroscopically, radiographically, and histologically. After completion of the distraction, the alveolar crest protruded prominently, showing the vertical augmentation of the alveolar bone. Soft tissues were broken down after the 6th day of distraction in 3-day latency group, and premature union occurred on the 7th day of distraction in the 7-day latency group. The average distance was $9.40{\pm}0.3mm$ in 3-day latency group, $9.35{\pm}0.1mm$ in 5-day latency group, and $8.85{\pm}0.1mm$ in 7-day latency group. In the radiograph taken at 8 weeks after distraction, there was slight bone resorption around the medial and distal edges of the alveolar bone segment, and a new bone deposition was observed in the neighboring alveolar crest area in all groups. Fibrous tissues were present in a part of the buccal cortical bone area of the distraction gap, and the woven and lamellar bones were observed in the distracted gap. There were bony bridges in the distraction gap in all animals examined. These results suggest that optimal time of latency period on alveolar ridge distraction using the intraoral distraction device is about 5 days in dogs, and about 7days in human beings.