Kim, Dae-Jun;Roh, Jae-Hwan;Kim, Jung-Gon;Yun, Jin I.
Korean Journal of Agricultural and Forest Meteorology
/
v.15
no.1
/
pp.26-39
/
2013
Yield reduction in major cereal grains seems unavoidable with the existing cropping systems under the projected climate change in Korea. Crop models were used to predict the effects of planting date shift on grain yields of rice, winter barley and soybeans at 64 agroclimatic zones in Korea. The shift of planting date by 7, 14, and 21 days before and after the recommended planting dates were incorporated in DSSAT experiment files to simulate growth, development and grain yields of major cereal crops. These included 3 rice cultivars representing early-, medium- and late-maturity groups, 1 winter barley and 1 soybean cultivars. Partial mitigation in yield reduction was found with earlier planting in the early maturing rice cultivar and with delayed planting in the late maturing rice cultivar under the RCP8.5 projected climate change in Korea. Additional yield increase in winter barley was expected by earlier planting treatments. Soybean showed a positive effect on grain yield with earlier planting. However, the rate was much lower than the case with winter barley and delayed planting caused yield reduction.
One of the most important cultural techniques of pearl millet (Pennisetum americanum (L.) Leeke) is to encourage rapid and uniform emergence of seedlings to establish good stand and to let them grow well. Thus the objectives of the study were to investigate the effects of pre-sowing seed soaking and planting depth on dormancy breaking, germination and emergence of the seedlings, and to estimate the optimum planting season of pearl millet in Suwon, Korea. The seeds with dormancy germinated 99 to 100 percent when soaked in the H$_2$O$_2$ 1% solution for 24 hours and rinsed with pure water, but germinated only 38% and 83% when soaked in pure water for 24 hours just after harvest and drying, and one month later from the harvest time, respectively. The seeds of Australia inbred line did not germinate at the constant 10$^{\circ}C$, but germinated at the constant 11$^{\circ}C$. It also was possible to estimate the optimum planting season by applying minimum temperature 11$^{\circ}C$ for germination. The minimum air temperature reached from late April in Suwon, Korea in regular years but fluctuated from late April to early May in 1986 and 1987. Thus, the safe planting season was mid-May for rapid and uniform germination of pearl millet seed. The optimum depth of planting was 2∼4cm under the optimum soil moisture condition, and 4 to 6 cm under the drier soil moisture condition. Subcoleoptile internode(mesocotyle) length increased according to increased depth of planting. Seedling crown placement also became deeper due to deeper planting of the seeds. The subcoleoptile internode length and seedling crown depth were positively correlated with actual planting depth, indicating that deeper planting would be not good for appropriate adventitious root and tiller development.
In South Korea, direct seeding of rapeseed (Brassica napus L.) is difficult during spring cultivation in early March because of the low yield production associated with late flowering and poor seed quality. To compare the period of direct sowing, the present study investigated the growth characteristics of rapeseed according to planting dates. Specifically, 35 day-old seedlings were transplanted or directly sown on four different dates (late February, early March, late March, and early April) in 2020 and 2021. As the planting date was delayed, the days to flowering of rapeseed decreased. Similarly, the plant height, seed set percentage, and seed yield of rapeseed were reduced upon delay in planting. The seed yield of rapeseed through direct seeding in late February was the highest, 2.76 ton·ha-1. On all seeding dates, except for late February, the transplanted rapeseed produced a higher yields than the directly seeded rapeseed. The crude oil and oleic acid content, which is related to the quality of rapeseed, decreased with the delay in planting dates, and this decrease was greater, with the direct seeding of rapeseed depending on the sowing time. In the correlation analysis, the planting date was significantly and negatively correlated with the yield, crude oil content, and oleic acid content of the transplanted rapeseed, while the sowing date was negatively correlated with the plant height, silique size, yield, and seed quality of the directly seeded rapeseed. Finally, the effect of planting date on rapeseed growth was stronger in direct seeding than in transplanting. Therefore, during spring cultivation after late February to early March, transplanting, rather than direct seeding, in more advantageous in terms of seed quality and yield.
10 of Korean domestic recommended varieties(all of them are determinate type) and 10 of introduced varieties from U.S.A.(All of them are indeterminate type) are grown in replicated field in order to clarify the varietal differences in the days from planting to blooming to ripening. The results are summarized as follows; 1. Domestic varieties showed remarkable shortday sensibility for the days from planting to blooming. The difference in sensibility between domestic and introduced was significant while within the domestic group the differences were not significant. 2. The days from planting to blooming were linearly shortened in accordance with the delayed planting from the late April through the late June. 3. Annual variation in days from planting to blooming was not noticeable in the domestic varieties while the introduced ones showed remarkably. 4. The days from blooming to ripening were significantly shortened for the introduced varieties but not significantly for the domestic varieties accordingly with the delayed planting. The mean shortest days of domestic varieties were longer than the mean shortest days of introduced varieties. 5. The days from planting to blooming was shortest when a variety was grown during early August through middle September (with 12.5~13.5 hrs day length and 22~$27^{\circ}C$ temperature), and the days from blooming to ripening were also shortest when a variety was matured within same duration. These were true for the varieties of both groups.
Park, Hyeon-Jin;Han, Won-Young;Oh, Ki-Won;Kim, Hyun-Tae;Shin, Sang-Ouk;Lee, Byong-Won;Ko, Jong-Min;Baek, In Youl
KOREAN JOURNAL OF CROP SCIENCE
/
v.59
no.4
/
pp.483-491
/
2014
Double cropping system including paddy field soybean is widely adopted nationwide, due to rise in market price and its higher income than paddy field rice. Sowing date of soybean as a second crop is being delayed depending on first crop's growth period and harvesting time. Due to the increased temperature in October and delayed first frost date, soybean could be harvested without frost damage even in late-plating. Therefore, selection of soybean cultivar which is appropriate for this environment is very important. The effect of sowing date and genotype of soybean on growth and yield was investigated for three planting dates (June 20, July 5, and July 20) with ten cultivars developed for soy-pate production, to figure out plant development and yield pattern in delayed planting. As planting date is delayed, plant height and pod number was decreased and this pattern was more clearly detected in mid-late maturity cultivars. Hundred-seed weight did not show significant changes even in late planting, due to compensations between yield components. Yield reduction of July 20 in contrast to that of June 20 showed that Nampung (9.6%) showed the least yield decline. Maximum yield was achieved from Daepung, Taekwang, and Uram among other soybean cultivars in late planting. Shortening of growth period was strongly detected in reproductive stage while length of vegetative stage was regularly maintained in both early and mid-late maturity cultivars.
Youn, Cheol Ku;Kim, Ki Hyun;Ahn, Ki Su;Jaeng, Jae Hyun;Park, Young Uk;Kwon, Young Hee;Lee, Sang Yeong
Korean Journal of Plant Resources
/
v.28
no.4
/
pp.541-545
/
2015
This study investigated the effect of planting density on growth and yield of elephant garlic. Three planting densities of 20 × 20, 20 × 15, and 20 × 10 ㎝ were tested with the furrow width fixed at 120 ㎝ for the evaluation of elephant galic growth and yield. The average date of emergence was middle and late November, requiring about 30 days for the all emergence. For the flowering, 221 days after sowing were required in all the treatments. Plant height and leaf growth were not significantly different according to the planting density. Flower stalk was shorter when planting density was narrow. The L/D ratio was decreased to form oval shape when planting density was narrow. The yield of elephant garlic was 1,811 ㎏ /10a in planting density 20 × 20 ㎝, 2,375 ㎏/10a in 20 × 15 ㎝, and 2,838 ㎏/10a in 20 × 10 ㎝ plot. The marketable garlic ratio was highest as 1,593 ㎏/10a in planting density of 20 × 15 ㎝.
This study was carried out to get infirmation for the breeding varieties and developing the cultural methods with representative 32 cultivars which were diffused from 1900 to 1982 and two cultural methods which were old one i.e., low dressing and late planting and modern one i.e., medium dressing and early planting. Duration of transplanting between cultural practices were 15 days but the duration of heading date were 5days. Panicle projecting duration was 5-10 days in all cultivars, especially, it is 5 days in early maturing varieties, 6-7 days in medium maturing varieties and 7-10 days in late maturing varieties. Periods from transplanting date to effective ripening date were 99.8 days in low dressing and late planting method, 106.2 days in modern one but the periods from heading date to effective ripening date were 31.4 days in low dressing and late planting method, 30.2 days in modern one. Ripening speed was very active from 5 to 10 days after heading and the daily increase of 1000 grain weight was from 847.8mg to 1130mg in that time and it slightly increased from 5 to 35 days after heading in Japonica varieties but increased after heading and suddenly decreased at 30 days after heading in Indica/Japonica varieties. Meteorological factors (temperature and amount of solar radiation) were positively correlated with the ripening speed but negatively correlated with the period of physiological and effentive ripening.
This study was carried out to get information for the breeding varieties and developing the cultural methods with representative 32 cultivars which were diffused from 1900 to 1982 and two cultural methods which were old one i.e., low dressing and late planting and modern one i.e., medium dressing and early planting. Duration of transplanting between cultural practices were 15 days but the duration of heading date were 5 days. Panicle projecting duration was 5-10 days in all cultivars, especially, it is 5 days in early maturing varieties, 6-7 days in medium maturing varieties and 7-10 days in late maturing varieties. Periods from transplanting date to effective ripening date were 99.8 days in low dressing and late planting method, 106.2 days in modern one but the periods from heading date to effective ripening date were 31.4 days in low dressing and late planting method, 30.2 days in modern one. Ripening speed was very active from 5 to 10 days after heading and the daily increase of 1000 grain weight was from 847.8mg to 1130mg in that time and it slightly increased from 5 to 35 days after heading in japonica varieties but increased after heading and suddenly decreased at 30 days after heading in Indica/Japonica varieties. Meteorological factors (temperature and amount of solar radiation) were positively correlated with the ripening speed but negatively correlated with the period of physiological and effective ripening.
Kim, J.D.;Kwon, C.H.;Kim, S.G.;Park, H.S.;Ko, H.J.;Kim, J.K.
Journal of Animal Science and Technology
/
v.44
no.2
/
pp.251-260
/
2002
The corn (Zea mays L) planting date in a double-cropping system is delayed until mid-May due to delayed rye harvest on May. This experiment was conducted to determine the optimum harvesting time for high yield and the best quality of silage corn at late planting date after harvesting winter rye. Corns were planted on 21 May and harvested at eight different maturity stage at Seoul National University Experimental Livestock Farm, Suwon in 1997. Maturities were B (blister; 16 days after silking), M (milk; 20 days), LM (late milk; 24 days), SD (soft dough; 28 days), ED (early dent; 33 days), FD (full dent; 38 days), LD (late dent; 44 days) and PM (physiological maturity; 53 days) stages. The percentage of whole plant dry matter (DM) showed optimum range for silage making (29.0 to 38.5%) when corn plant was harvested at between ED and LD stages. Maximum whole plant DM (14,831 kg/ha) and total digestible nutrients (TDN) yields (10,675 kg/ha) reached at full dent stage. The percentage of whole plant acid detergent fiber (ADF) was decreased from 35.4 to 22.1%, and that of neutral detergent fiber (NDF) was also decreased from 63.8 to 46.0% as harvest stage progressed. These changes in chemical compositions were associated with changes in plant part composition. A progressive increase in total ear, and the decrease in stover portion in the plant were observed with advance in harvest stage. Calculated on net energy for lactation (NEL) and TDN values based on ADF percentage of stover plant decreased by ED stage and then increased by PM stage. But NEL and TDN values of ear and whole plant increased as harvest stage progressed. While in vitro dry matter digestibility of stover was decreased from 61.1 to 49.7%, whole plant was increased from 58.3 to 65.7% as maturity advanced (P$<$0.05). The results of this study indicate that corn can be harvested for silage at full (1/2 milkline) and late dent (2/3 milkline) stages for maximum yield and optimum quality at late planting. And days after silking at late planting was 38 and 44 days.
Park, Yang-Mun;Song, Chang-Khil;Kang, Bong-Kyoon;Kim, Dong-Woo;Ko, Dong-Hwan
KOREAN JOURNAL OF CROP SCIENCE
/
v.44
no.3
/
pp.201-206
/
1999
For the mass production of plug seedlings in cultivar ‘Dejima’ potato (Solanum tuberosum L.) the optimal apical cutting diameter for rooting and rapid multiplication of stem cuttings in hydroponics were determined. In addition, the best planting date was predicted to increase tuber yield of plug seedlings at fall cropping in Cheju-Do, Korea. Days to initial rooting decreased as the cutting diameter was reduced. Plant height, leaf number, root length and root weight per plant were favorable as the cutting diameter was small. The ideal cutting diameter was 1-2 mm in this experiment. In the hydroponic cultures, the Japanese standard (JS) nutrient solution was the most effective for multiplication of stem cuttings. It was able to propagate more than 20 times a month from a single mother plant. Viability of plants, which were derived from plug seedlings using stem cuttings, was excellent when transplanted to the field. The number of tubers and tuber yield in both of the plug seedlings and seed potato planting plots were high when planted on 25 August. The number and yield were reduced when planted on 15 August, 5 September and 15 September. The degree of decrease of tuber yield in the plug seedling planting plot however, was lower than that of seed potatoes when the planting date was late. In the case of small tubers (under 30 g), the number of tubers and tuber yield were evidently increased in the seed potato tuber planting plot; the yield of large tuber (over 80g) in the plug seedling planting plot was higher than that of the seed potato. The total tuber yield per plant in the plug seedling planting plot was less than that of the seed potato; therefore, in order to increase tuber yield it was necessary to increase field plant density.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.