• Journal of the Korean Physical Society
• /
• 제73권10호
• /
• pp.1506-1511
• /
• 2018

Spectral behaviors of lasing from semiconductor square ring microcavities with structures for unidirectional laser oscillation were investigated. When a tapered structure was introduced, the lasing envelope shifted to a shorter wavelength region. Statistical estimate of the additional loss caused by the tapered structure was carried out by analyzing spectral data from many sets of cavities with various sizes. When a saw-edged structure was introduced, the unidirectional lasing functioned well but no apparent spectral shift was observed due to negligible additional loss.

• 대한치과보철학회지
• /
• 제34권3호
• /
• pp.489-500
• /
• 1996

Pulsed Nd : YAG LASER has been applied to various fields in clinical dentistry including the treatment of peri-implantitis. However, LASER can affect properties of matter of dental implants which are important to maintaining the health of peri-implant tissue and can raise its temperature during lasing. So there have been warings of using LASER to treat peri-implantitis. But, the effects of laser on dental implants itself are not certain yet. So we measured the temperature rising, examined matter of properties by SEM and EDX before and after pulsed Nd : YAG lasing various intensity. 7 TPS implants and 7 HPS implants were used and pulsed Nd : YAG LASER was used in 0.3W, 1.0W, and 2.0W. 1. 2.0W LASER made polished neck portion of HPS implants reach $39.2^{\circ}C$ after 5 seconds lasing. 2. LASER made crater-like defects on plasma sprayed surface and surfaces were melted and divided by fragments after lasing. 3. There was no specific evidence of element change after lasing.

• Journal of the Optical Society of Korea
• /
• 제16권2호
• /
• pp.162-165
• /
• 2012

Bow-tie modes were proposed in a grooved rectangular resonator and their lasing characteristics were investigated in semiconductor microcavities. The observed spacing between two adjacent lasing peaks from the grooved cavity was reduced compared to that of 4-bounce whispering gallery modes (WGMs) from the same-sized simple rectangular cavity due to increased round-trip path length of the bow-tie modes. The lasing spectra of bow-tie modes obtained from two adjacent corners showed highly correlated patterns while those of 4-bounce WGMs did not.

• 청정기술
• /
• 제22권3호
• /
• pp.203-207
• /
• 2016

Here, we report a novel fabrication technique for patchable organic lasing sheet based on non-volatile liquid organic semiconductors and freestanding polymeric film with high flexibility and patchability. For this work, we have fabricated the second-order DFB grating structure, which leads to surface emission, embedded in the freestanding polymeric film. Using an ultra-violet (UV) curable polyurethaneacrylate (PUA) mixture, the periodic DFB grating structure can be easily prepared on the freestanding polymeric film via a simple UV curing process. Due to unsaturated acrylate remained in the PUA mixture after UV curing, the freestanding PUA film provides adhesive properties, which enable mounting of the patchable organic lasing sheet onto non-flat surfaces with conformal contact. To achieve laser actions in the freestanding resonator structure, a composite material of liquid 9-(2-ethylhexyl)carbazole (EHCz) and organic laser dyes was used as the laser medium. Since the degraded active materials can be easily refreshed by a simple injection of the liquid composite, such a non-volatile liquid organic semiconducting medium has degradation-free and recyclable characteristics in addition to other strong advantages including tunable optoelectronic responses, solvent-free processing, and ultimate mechanical flexibility and uniformity. Lasing properties of the patchable organic lasing sheet were also investigated after mounting onto non-flat surfaces, showing a mechanical tunability of laser emission under variable surface curvature. It is anticipated that these results will be applied to the development of various patchable optoelectronic applications for light-emitting displays, sensors and data communications.

• 한국통신학회논문지
• /
• 제31권6A호
• /
• pp.547-555
• /
• 2006

본 논문에서는 고효율 증폭 기능을 가지는 이중경로증폭 구조의 고정이득 L-band EDFA를 구현하였다. 선형공진기로부터 생성된 발진광에 의해 신호채널들이 분기결합 되더라도 잔류채널의 요동을 줄일 수 있다. 잔류채널의 과도응답 특성에 대해 발진출력광 변화율이라는 정량적인 척도를 제시하였고 이를 이용해 발진파장 및 발진방향에 따른 과도응답 특성을 측정하였다. 결과적으로 단파장 및 펌프광의 반대 방향으로 전파하는 후방 발진광이 가장 양호한 것으로 판명되었다.

• 공학논문집
• /
• 제7권1호
• /
• pp.5-16
• /
• 2005

본 논문에서는 고효율 증폭 기능을 가지는 이중경로증폭 구조의 고정이득 L-band EDFA를 구현하였다. 선형공진기로부터 생성된 발진광에 의해 신호채널들이 분기결합 되더라도 잔류채널의 요동을 줄일 수 있다. 잔류 채널의 과도응답 특성에 대해 발진출력광 변화율이라는 정량적인 척도를 제시하였고 이를 이용해 발진파장 및 발진방향에 따른 과도응답 요동을 측정하였다. 결과적으로 단파장 및 후방 발진광이 가장 양호한 것으로 판명되었다.

• Transactions on Electrical and Electronic Materials
• /
• 제16권3호
• /
• pp.117-123
• /
• 2015

Cholesteric liquid crystals are one dimensional photonic band-gap materials due to their birefringence and periodic structure. Dye doped cholesteric liquid crystals are self-assembling, mirror-less, low threshold laser structures that exhibit distributed feedback. In this review paper, we have presented the development in the field of lasing characteristics of dye doped cholesteric liquid crystals.

• ETRI Journal
• /
• 제32권2호
• /
• pp.339-341
• /
• 2010

The fundamental transverse mode lasing of a hybrid laser diode is a prerequisite for efficient coupling to a single-mode silicon waveguide, which is necessary for a wavelength-division multiplexing silicon interconnection. We investigate the lasing mode profile for a hybrid laser diode consisting of silicon slab and InP/InGaAsP deep ridge waveguides. When the thickness of the top silicon is 220 nm, the fundamental transverse mode is lasing in spite of the wide waveguide width of $3.7{\mu}m$. The threshold current is 40 mA, and the maximum output power is 5 mW under CW current operation. In the case of a thick top silicon layer (1 ${\mu}m$), the higher modes are lasing. There is no significant difference in the thermal resistance of the two devices.

• 한국광학회지
• /
• 제8권1호
• /
• pp.58-62
• /
• 1997

광섬유격자를 이용하는 단순구조의 발진 loop를 구성하여 erbium 첨가 광섬유 증폭기를 발진시킴으로써 광섬유 증폭기의 동작이득을 제어하는 방식을 제안하고 실험하였다. 하나의 광섬유격자가 loop내에서 발진 파장을 선택하는 기능과 함께 발진광이 출력단으로 나오지 못하도록 차단하는 기능의 두가지의 역할을 수행하도록 loop가 구성되었다. 광섬유 증폭기의 동작이득이 발진 loop의 손실과 같은 크기에 고정되어 입력광 파워의 변화에 무관하게 일정하게 제어되었으며, 가변형 결합기로 loop 손실을 변화시킴으로써 동작이득의 조절이 가능하였다. 이러한 loop 구성방식으로 이득제어된 erbium 첨가 광섬유 증폭기는 WDM 시스템에서 여러 가지의 장점을 가질 수 있다.

• Journal of the Optical Society of Korea
• /
• 제6권3호
• /
• pp.108-116
• /
• 2002

Lasing modes of laser-diode-pumped fiber grating lasers are analyzed by coupled-mode theory. First, a power series solution of the coupled-mode equations is derived under the assumption of an exponentially-decreasing longitudinal modal gain profile for a laser-diode-pumped grating section, followed by determination of the transfer matrix for such a section. Based on these results, an eigenvalue equation for oscillation is then derived and solved numerically for the lasing modes of uniform and phase-shifted fiber grating lasers. Comparisons made with the uniform-gain results indicate that, surprisingly, the lasing mode characteristics are not as significantly altered as might be expected in most cases, even for a highly nonuniform gain profile. In the case of a phase-shifted grating, the phase-shift position appears to have a much greater impact on determining the threshold gain, the modal field distribution, and the front-to-back output power ratio.