• Current Optics and Photonics
• /
• v.6 no.6
• /
• pp.521-549
• /
• 2022

Fiber lasers have made remarkable progress over the past three decades, and they now serve far-reaching applications and have even become indispensable in many technology sectors. As there is an insatiable appetite for improved performance, whether relating to enhanced spatio-temporal stability, spectral and noise characteristics, or ever-higher power and brightness, thermal management in these systems becomes increasingly critical. Active convective cooling, such as through flowing water, while highly effective, has its own set of drawbacks and limitations. To overcome them, other synergistic approaches are being adopted that mitigate the sources of heating at their roots, including the quantum defect, concentration quenching, and impurity absorption. Here, these optical methods for thermal management are briefly reviewed and discussed. Their main philosophy is to carefully select both the lasing and pumping wavelengths to moderate, and sometimes reverse, the amount of heat that is generated inside the laser gain medium. First, the sources of heating in fiber lasers are discussed and placed in the context of modern fiber fabrication methods. Next, common methods to measure the temperature of active fibers during laser operation are outlined. Approaches to reduce the quantum defect, including tandem-pumped and short-wavelength lasers, are then reviewed. Finally, newer approaches that annihilate phonons and actually cool the fiber laser below ambient, including radiation-balanced and excitation-balanced fiber lasers, are examined. These solutions, and others yet undetermined, especially the latter, may prove to be a driving force behind a next generation of ultra-high-power and/or ultra-stable laser systems.

• Ceramist
• /
• v.10 no.3
• /
• pp.75-85
• /
• 2007

Over the past few years, due to the great development of optical communications, an increasing R&D activity has been focused on the design and manufacture of the integrated optic amplifiers, with particular reference to their application in wavelength-division-multiplexing (WDM) systems. In this technological context, rare-earth-doped oxide glasses, which had been widely used for solid state lasers, gained much attention as highly performing materials in the third telecom window, around 1.5 micron. The aim of the present paper is to provide a brief overview of the progress made, with particular reference to the authors' work in this area, and to shortly discuss its perspectives.

• Korean Journal of Optics and Photonics
• /
• v.31 no.5
• /
• pp.218-222
• /
• 2020

In this paper, we have experimentally demonstrated a 2-kW-class spectrally-beam-combined laser with high beam quality, using narrow-linewidth ytterbium-doped polarization-maintaining fiber amplifiers. Five fiber amplifiers with different center wavelengths were implemented for the spectrally-beam-combined laser. The center wavelengths of the five amplifiers were 1062, 1063, 1064, 1065, and 1066 nm, respectively. A phase-modulated laser diode was used as a seed source for each amplifier. The seed sources were modulated by filtered pseudorandom-bit-sequence (PRBS) signals 5 GHz in linewidth. The polarization-maintaining large-mode-area fiber with a core size of 30 ㎛ was used as a delivery fiber to mitigate the stimulated Brillouin scattering (SBS) effect. The laser beams from five amplifiers were spectrally combined by a multilayer dielectric diffraction grating. The maximum output power and beam quality M² of the combined laser were measured to be 2.3 kW and 1.74, respectively.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.02a
• /
• pp.293-294
• /
• 2008

Using bi-direction SOA based Extension system, FTTH can enhance PON system by increasing both the upstream and downstream link budget. This increased link budget can be used to extend the distance, increase the split ratio or both. The bi-direction SOA regenerates signals using all-optical amplification, and is therefore transparent to data rate or protocol. The bi-direction SOA supports legacy as well as future FTTx standards. This is based on SOA's proprietary technology platform for the manufacturing of advanced discrete photonics and photonic integrated circuits (PICs). Because the bi-direction SOA uses the same InP semiconductor technology used in virtually all telecom lasers, it is able to amplify signals at 1310 and 1490 nm, wavelengths not accessible with commercial fiber-amplifier (EDFA) technology. Due to the extremely fast response time of the InP semiconductor optical amplifiers inside, the SOA can accommodate both continuous (downstream) and bursty (upstream) traffic.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.258-259
• /
• 2000

Quantum Well Disordering (QWD) has drawn a considerable attention in recent years$^{(1-3)}$ due to its wide applicability to optoelectronic devices. QWD allows modification of the shape of QW in selected regions, hence it modifies the subband energies in conduction and valance bands$^{(4)}$ . This leads to changes in optical properties such as band gap, absorption coefficient and refractive index. Thus such disordering in selected areas enables monolithic integration of various optoelectronic devices such as lasers, EA/EO modulators, waveguides and optical amplifiers. In this paper, we investigate the quantum well disordering effects on photoluminescence spectra by using experimental measurements and theoretical analysis$^{(5)}$ . (omitted)

• Korean Journal of Optics and Photonics
• /
• v.31 no.1
• /
• pp.7-12
• /
• 2020

In this paper, we experimentally investigate the fiber fuse in single-mode 2-kW-class high-power fiber amplifiers, depending on the cooling method at the splicing point. We measured the temperature of the splicing point between the pump-signal combiner and gain fiber as a function of laser output power. The temperature of the splicing point increased from 20 to 32℃ with a slope of 0.01℃/W, up to 1.2 kW of laser output power. At higher powers the temperature of the splicing point increased dramatically, with a slope of 0.08℃/W. After that, the fiber amplifier was destroyed during operation at 1.96 kW of output power by fiber fuse. The bullet shape, a common feature of fiber fuse, was observed in the damaged passive fiber core of the pump-signal combiner. Later, we adopted an improved water-cooled cold plate to increase the cooling efficiency at the splicing point, and investigated the laser output power. The temperature at the splicing point was 35.8℃ with a temperature-rise slope of 0.007℃/W at the maximum output power of 2.05 kW. The beam quality M² was measured to be less than 1.3, and the output beam's profile was a stable Gaussian shape. Finally, neither fiber fuse nor mode instability was observed in the fiber amplifier at the maximum output power of 2.05 kW.

• Korean Journal of Optics and Photonics
• /
• v.13 no.5
• /
• pp.396-399
• /
• 2002

Using a bi-layer anti-reflection coating of $TiO_2$and $SiO_2,$ we have achieved a minimum facet reflectivity of $~10^{-5}$ and a band width of 27 nm for a reflectivity of $~10^{-4}$ or less for 1.3 $\mu\textrm{m}$ spot size converter integrated semiconductor lasers. This coating is applicable to external-cavity-tuned laser sources and semiconductor optical amplifiers.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.4
• /
• pp.565-572
• /
• 2001

At the most recent years, laser medical instruments, laser applications and laser nuclear fusion need strong visible light and ultraviolet rays. Nonlinear optical devices, such as harmonic generators and parametric oscillators, provide a means of extending the frequency range of available laser sources. Frequency conversion is a useful technique for extending the utility of high-power lasers. It utilizes the nonlinear optical response of an optical medium in intense radiation fields to generate new frequencies. These progresses have been used to generate high-power radiation in all spectral regions, from the ultraviolet to the far infrared. Optical parametric oscillators and amplifiers generate two waves of lower frequency They are capable of generating a range of wavelengths from a single frequency source, in some cases spanning the entire visible and near infrared regions. Consequently, in order to obtain the green light, the pulsed Nd:YAG laser using multiple-mesh PFN(Pulsed Forming Network) method with Nonlinear optical device was adopted. We compared the current pulseshapes with the laser output energy, and conversion efficiency.

• Journal of the Korean Ceramic Society
• /
• v.41 no.9
• /
• pp.696-702
• /
• 2004

Lifetime of excited electronic states inside the 4f configuration of rare-earth elements embedded in chalcogenide glasses is very sensitive to medium-range structural changes of the host glasses. We have measured lifetimes of the 1.6$\mu\textrm{m}$ emission originating from Pr$\^$3+/ : ($^3$F$_3$, $^3$F$_4$)\longrightarrow$^3$H$_4$ transition in amorphous chalcogenide samples consisting of Ge, Sb, and Se elements. The measured lifetimes fumed out to have their maximum at the mean coordination number of -2.67, which arises accordingly from structural changes of the host glasses from 2 dimensional layers to 3 dimensional networks. This new finding supports that the so-called topological structure model together with chemically ordered network model is adequate to explain relationship between the emission properties of rare-earth elements and the medium-range structures of amorphous chalcogenide hosts with a large covalent bond nature. Thus, it is validated to predict site distribution and lifetime of rare-earth elements doped in chalcogenide glasses simply based on their mean coordination number.

• Korean Journal of Optics and Photonics
• /
• v.15 no.1
• /
• pp.17-21
• /
• 2004

We demonstrate an S/S＋band discretely tunable thulium doped fiber laser (TTDFL), anchored on a 50-㎓ ITU-T grid. Investigating the inversion analysis of the thulium doped fiber (TDF) in applying a dual wavelength (1.4 m and 1.5 m) pumping scheme, a laser whose tuning range covers most of the S/S＋band has been obtained. Within the wide 3-㏈ bandwidth of 65.1 nm, the output power of the tunable laser exceeds 6.1 ㏈m with very flat spectral profile and the number of DWDM channels generated is as large as 178. If we increase the subsidiary pump power to 22 ㎽, the bandwidth is expanded up to 66.2 nm. By controlling the temperature of the fine grid filter, we have also shown that the frequency locking capability of the laser can be improved. The laser developed in this work is expected to be utilized as a practical optical source providing reference wavelengths in the S/S＋band.