• Journal of Welding and Joining
• /
• 제15권3호
• /
• pp.99-108
• /
• 1997

For the conventional welding method, the high heat transfer makes the crystallization of the work material unavoidable. Whereas the laser is able to weld the amorphous metal without a crystallized zone, because heat transfer is limited withn a very small restricted volume. In this paper, the possibilities and the limits of the laser welding in a deep frozen environment by liquid nitrogen were studied to utilize the advantageous properties of amorphous metal foils. The author investigated, after laser welding in a deep frozen environment with a solid state laser (Nd:YAG-laser), the achievable strengths and the influences of the laser beam parameters on the strengths.

• 한국레이저가공학회지
• /
• 제7권1호
• /
• pp.29-36
• /
• 2004

The dynamics of laser-induced plasma/shock wave and the interaction with a surface in the laser shock cleaning process are analyzed by optical diagnostics. Shock wave is generated by a Q-switched Nd:YAG laser in air or with N$_2$, Ar, and He injection into the focal spot. The shock speed is measured by monitoring the photoacoustic probe-beam deflection signal under different conditions. In addition, nanosecond time-resolved images of shock wave propagation and interaction with the substrate are obtained by the laser-flash shadowgraphy. The results reveal the effect of various operation parameters of the laser shock cleaning process on shock wave intensity, energy-conversion efficiency, and flow characteristics. Discussions are made on the cleaning mechanisms based on the experimental observations.

• 한국레이저가공학회지
• /
• 제15권2호
• /
• pp.1-5
• /
• 2012

Gelatin is used as a model for soft biological tissues in studying laser interaction with the soft tissues. In this work, we analyze the interaction between gelatin and excimer and Ti:Sapphire femtosecond laser under various conditions, especially by varying the laser, laser fluence and pulse number. The results show that swelling of the surface and ablation depth can be controlled by adjusting the process parameters.

• Journal of Welding and Joining
• /
• 제7권4호
• /
• pp.12-21
• /
• 1989

Laser beam welding parameters have experimentally investigated, using a continuous wave 3kW $CO_2$ laser with the various travel speeds, beam mode and laser beam power in low carbon steels. An optimum position of focus and the effect of shielding gas on penetration depth with varying the flow range of 0.5 to 5.1m/min have been combined to investigate the effect of laser power and travel speed on penetration depth and bead width. It is found that the optimum position of focus in 3kW class laser is 0.5 to 1.5mm below the surface of the material. The flow rate of shielding gas affects the penetration depth and He is more effective than Ar. The penetration depth in laser welds of low carbon steels is between two and four times of the bead width. Laser beam welding of butt joints in 2mm thick carbon steel has been carried out to establish a weldability lobe. The lobe indicating acceptable welding conditions is introduced.

• 한국레이저가공학회지
• /
• 제8권1호
• /
• pp.9-18
• /
• 2005

The laser direct writing method using a UV Argon-ion laser is studied for fabrication of waveguide. The laser direct writing system is constructed with a vision camera, a xy-stage, a motion controller and the delivery components of a laser beam. The UV Argon-ion laser has wavelength range of $333.6\~363.8$ nm. A photo-active UV curable polymer for a planar light-wave circuit(PLC) of single mode is used. This polymer is irradiated by Argon-ion laser and developed by a solvent after a post-baking. The optimum laser direct writing condition is obtained experimentally by changing various process parameters such as laser power, writing speed and focal length. The propagation and coupling loss of a optical waveguide was measured as 1dB/cm and 0.6dB/cm, respectively. Also, the minimum width of waveguide of $100{\mu}m$(ZPLW-207) is obtained. Finally, the waveguides of line, bend and branch type are successfully fabricated.

• 대한기계학회논문집A
• /
• 제37권9호
• /
• pp.1141-1149
• /
• 2013

복잡한 물리적 현상에 대한 수학적 모델을 만들기 위해 적용되는 차원해석은 LSP 공정변수의 영향을 이해하는데 중요한 도구가 된다. 본 연구에서는 버킹검(Buckingham) ${\prod}$이론을 이용한 차원해석을 통해 레이저 충격 피닝의 잔류응력 결과에 영향을 미치는 변수를 확인하고, 유한요소법을 이용하여 LSP 공정변수인 최대압력파, 압력파 지속시간, 레이저 샷 크기 및 다중 LSP 에 대한 잔류응력 결과를 확인하였다.

• 열처리공학회지
• /
• 제8권1호
• /
• pp.32-43
• /
• 1995

Ti-6Al-4V alloy are widely used in chemical and aircraft industries for their good corrosion resistance and high strength to weight ratio. Surface alloying of Ti alloy by $CO_2$ laser is able to produce few hundred micrometers thick TiN surface-alloyed layer with high hardness on the substrate very simplely by injecting reaction gas($N_2$) into a laser-generated melt pool and adjust the hardness to the specific requirements of the individual application by changing of laser processing parameters. This research has been investigated the effect of such parameters on TiN surface-alloying of Ti-6Al-4V alloy by $CO_2$ laser. The maximum hardness of TiN surface-alloyed zone waw obtained by injecting 100% $N_2$ gas and it was decreased as the amount of $N_2$ gas in Ar and $N_2$ gas mixture was decreased. As scanning speed was increased, the hardness and depth of TiN surface-alloyed zone was decreased at constant laser power. The surface hardness after double scanning laser treatment is higher than that of single scanning. At constant laser power, the surface roughness is increased after the surface alloying if laser scanning speed is decreased.

• Medical Lasers
• /
• 제10권1호
• /
• pp.31-36
• /
• 2021

Background and Objectives Several predicted optimal parameters for laser treatment have been suggested, making the settings subject to variation. Thus, picosecond lasers may require more data and studies to optimize the laser parameters, increase the efficacy of each session, and minimize the total number of sessions. This study evaluated the results of picosecond laser tattoo removal in variable locations, focusing on the aesthetic outcome, number of procedures, and adverse effects. Materials and Methods Nine patients who underwent picosecond laser treatment from February 2014 to July 2020 were enrolled. Before the procedures, the required number of sessions was estimated using the Kirby-Desai scale. At the end of the treatment, the patients assessed their satisfaction. The patient and two plastic surgeons assessed the clearance of the tattoo. Results The mean of the clearance was 86.6% in both the patient and investigators assessment. The patients reported satisfaction for an average score of 5.1 ± 0.78 for the aesthetic outcome, 4.5 ± 0.78 for pain, 4.1 ± 0.92 for the number of procedures, and 4.7 ± 0.97 for adverse effects. The average number of actual procedures was 6.7 ± 1.20. The average Kirby-Desai score was 7.1 ± 1.45. Their correlation coefficient was 0.803, which is considered a strong positive correlation. Conclusion Picosecond lasers have a remarkable ability to degrade smaller tattoo pigments through a photoacoustic effect. Moreover, a picosecond laser treatment for tattoo removal can be a safe and effective method. Picosecond lasers are a promising technology with the potential to optimize the treatment of tattoos.

• 한국산업융합학회 논문집
• /
• 제20권4호
• /
• pp.307-311
• /
• 2017

Ultra short pulse laser processing with the PI (polyimide) substrate is conducted to increase flexibility and radius of curvatures. A femtosecond laser is used to perform micro machining by minimizing the heat effect in PI substrate. The laser processing according to the parameters, such as fabricated line width, depth, laser power, distance between lines, is carried out to understand the characteristics of fabricated lines. A bending test is carried out to evaluate bending shapes and the radius of curvature after bending and spreading it 1000 times. The results demonstrates that the radius of curvature decreases in deepen lines and increases with the augment of the number of the fabricated lines, and distance between lines.

• Journal of Welding and Joining
• /
• 제15권4호
• /
• pp.99-108
• /
• 1997

Analytical model for the temperature distribution and the cooling rate of weld in dual beam laser welding is presented for investigating the possibility of controling the cooling rate. The model is based on the solutions to the problem of heat flow due to the distributed and line heat sources for preheating and welding respectively in plates with finite thickness. The effects of beam power, beam distribution parameter, interbeam distance, and welding speed on the resulting temperature distribution and cooling rate are presented. The cooling rates of dual beam laser weld at the weld centerline under the investigated conditions are reduced to as one third of those of welds which were produced by single beam laser. And it appeared that the cooling rate of dual beam laser weld is strongly dependent on the process parameters of preheating laser beam power and welding speed.