• 제목/요약/키워드: Laser oscillation

검색결과 84건 처리시간 0.028초

Fabry-Perot 레이저의 자기궤환 레이저 발진을 이용한 색분산 측정법 (Dispersion measurement technique based on a self-seeding laser oscillation of a Fabry-Perot laser)

  • 윤기홍;송재원;김현덕
    • 한국광학회지
    • /
    • 제15권2호
    • /
    • pp.104-108
    • /
    • 2004
  • 폐경로를 통한 Fabry-Perot 레이저의 자기궤환 레이저 발진(self-seeding laser oscillation)을 이용하여 구조가 간단하고 경제적인 색분산(chromatic dispersion) 측정법을 제안하였다. 저가의 Fabry-Perot 레이저를 이용하여 광펄스들을 생성하고, 광섬유를 통해 전송되는 광펄스들 사이의 군속도 차(group delay difference)를 Fabry-Perot 레이저의 자기궤환 발진 현상을 통해 감지함으로써 광섬유의 색분산계수를 측정할 수 있도록 하였다. 제안된 측정법에 따라 구현된 측정 장치는 고가의 상용 계측기와 비슷한 수준의 색분산계수 측정 정확도를 제공하고, 재현성은 0.5%보다 좋음을 실험적으로 검증하였다.

Fabry-Perot 레이저의 자기궤환 레이저 발진을 이용한 광섬유 길이 측정법 (Fiber Length Measurement Technique based on a Self-Seeding Laser Oscillation of a Fabry-Perot Laser Diode)

  • 윤기홍;송재원;김현덕
    • 대한전자공학회논문지SD
    • /
    • 제41권12호
    • /
    • pp.51-57
    • /
    • 2004
  • 본 논문에서는 폐경로를 통한 Fabry-Perot 레이저의 자기궤환 레이저 발진 현상을 이용하여 새로운 광섬유 길이 측정 방법을 제안하였다. Fabry-Perot 레이저에 변조전류를 인가하여 생성된 광펄스를 피측정 광섬유를 포함하는 폐경로를 통과한 후 다시 레이저로 입사시키면 특정 변조주파수에서 자기궤환 레이저 발진이 유도될 수 있다. 제안된 측정법에서는 특정 모드에서 자기궤환 레이저 발진을 유도하기 위한 변조주파수들을 측정하고, 이 변조주파수들 사이의 차를 이용하여 광섬유의 길이를 계산하도록 한다. 제안된 측정법을 이용하여 0.1 ∼ 75 km 범위의 피측정 광섬유의 길이 측정을 수행하였고, 측정결과는 기존의 상용 계측기를 사용한 측정 결과와 잘 일치함을 실험적으로 검증하였다. 상용 계측기와의 상대 오차는 0.24 % 이하였고, 반복측정오차(repeatability)는 0.1 % 보다 작았다.

흡수격자를 갖는 DFB 레이저의 제작 및 특성 (Fabrication and Characteristics of DFB Laser with Absorption Grating)

  • 이형종
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 1990년도 제5회 파동 및 레이저 학술발표회 5th Conference on Waves and lasers 논문집 - 한국광학회
    • /
    • pp.73-78
    • /
    • 1990
  • 1.3${\mu}{\textrm}{m}$ DFB with absorption grating of 1.55${\mu}{\textrm}{m}$ InGaAsP layer was fabricated. This new type of DFB laser shows self-plusation for DC operation. At low level of injection the relation between the pulsation frequency and the injection current shows similar behavior with the relaxation oscillation of ordinary laser and at high level of injection the pulsation frequency decreases compared to the relaxation oscillation. Period doubling, period 3 and 4 were observed for AC modulation. In case of period doubling the waveform shows only one pulse within a period without any accompanying subsidiary pulses and the oscillation frequency was quite stable. The pulse widths as short as 58.5 ps was achieved with AC modulation. We propose the time division multiplexing application of this kind of DFB laser.

  • PDF

광섬유 패브리-페로 파장가변 필터의 공진특성에 기반한 고속 파장가변 모드잠김 레이저의 제작 (Construction of High-Speed Wavelength Swept Mode-Locked Laser Based on Oscillation Characteristics of Fiber Fabry-Perot Tunable Filter)

  • 이응제;김용평
    • 전기학회논문지
    • /
    • 제58권7호
    • /
    • pp.1393-1397
    • /
    • 2009
  • A high-speed wavelength swept laser, which is based on oscillation characteristics of a fiber Fabry-Perot tunable filter, is described. The laser is constructed by using a semiconductor optical amplifier, a fiber Fabry-Perot tunable filter, and 3.348 km fiber ring cavity. The wavelength sweeps are repeatatively generated with the repetition period of 61 kHz which is the first parallel oscillation frequency of the Fabry-Perot tunable filter for the low power consumption. Mode-locking is implemented by 3.348 km fiber ring cavity for matching the fundamental of cavity roundtrip time to the sweep period. The wavelength tuning range of the laser is 87 nm(FWHM) and the average output power is 1.284 mW.

단공진기 색소레이저의 펄스폭 연속가변 특성 (Continuous variation characteristics of pulse width in short cavity dye laser)

  • 김용평
    • 한국광학회지
    • /
    • 제10권6호
    • /
    • pp.512-517
    • /
    • 1999
  • 이완발진 현상을 이용하는 단공진기 색소레이저(QDL:quenched dye laser)는 극단펄스 광원으로서 많은 장점을 갖고 있다. 본 연구에서는 파장 590nm에서 발진 스펙트럼의 최대값을 갖는 Rhodamine 6G를 레이저 매질로 하고, 파장 308nm의 XeCl 레이저를 펌핑원으로 하여, 이득의 길이가 5mm인 QDL의 이완발진에 의한 극단펄스 발생특성을 컴퓨터 시뮬레이션에 의해 분석하였다. 분석결과, 펌핑광의 펄스폭에 대하여 QDL 출력빔은 1/100 이하로 그 펄스폭이 짧아짐을 밝혀 QDL 이 극단펄스 발생용으로 매우 유용한 레이저임을 밝혔으며, 펌핑광의 공간적 크기를 조절함에 의하여 출력 펄스폭의 연속적인 가변동작이 가능함을 제시하였다.

  • PDF

Regenerative Erbium-Doped Fiber Ring Amplifier with Unidirectional and Bi-directional Feedbacks

  • Shah, N.S.Mohd.;Teyo, T.C.;Poopalan, P.;Ahmad, H.
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 ITC-CSCC -1
    • /
    • pp.540-541
    • /
    • 2002
  • In this paper, the performance of upidirectional and hi-directional regenerative erbium-doped fiber amplifier (EDFA) is compared. The systems are operating above laser oscillation threshold. The experimental results show that the unidirectional regenerative EDFA has a better performance than the hi-directional.

  • PDF

Single Mode Laser Oscillation in an Nd-Doped Large Core Double Clad Fiber Cavity with Concatenated Adiabatic Tapers

  • Seo, Hong-Seok;Choi, Yong-Gyu;Kim, Kyung-Hon;Jeong, Hoon;Oh, Kyung-Hwan
    • ETRI Journal
    • /
    • 제24권3호
    • /
    • pp.255-258
    • /
    • 2002
  • We created a new design for an Nd-doped clad-pumped silica fiber laser to enhance the pump absorption and lasing efficiency for a butt-coupled, end-pumped scheme. Two concatenated adiabatic tapers formed within the laser cavity simultaneously removed higher order modes and were spliced to conventional single mode fibers. We theoretically analyzed mode propagation along the composite cavity and experimentally achieved continuous wave oscillation in the $LP_{01}$ mode at $1.06\;{\mu}m$ and a laser output power of over 820 mW with a slope efficiency of 27%.

  • PDF

외부 광귀환이 있는 레이저 다이오드의 혼돈특성 (Chaos Characteristics of Laser Diodes with External Optical Feedback)

  • 양동석;한영진;김창민
    • 한국광학회지
    • /
    • 제5권3호
    • /
    • pp.394-403
    • /
    • 1994
  • 외부 광귀환이 있는 레이저 다이오드의 혼돈특성에 관해 고찰하였다. Fabry-Perot 공진기 형태의 레이저에 외부 거울에 의한 광귀환을 가정하였으며 파장 $1.3{\mu}m$의 "InGaAsP" buried-hetero structure 레이저에 $1.3J_{th}$의 전류가 인가되었을 때를 모의전산 하였다. 광귀환계수 K의 증가량에 따라 다음의 네단계로 진화현상을 보이고 있다. (1)광귀환계수 K가 아주 작을 때는 시간이 지남에 따라 이완발진은 감쇄되고, 정상 상태에 도달하여 안정된 동작특성을 보인다. (2)K가 조금 증가하면 이완발진은 감쇄되지 않고 주기적인 발진을 유지하기 시작한다. (3)K가 더욱 증가하면 발진의 폭은 증가하고 발진형태의 주기는 길어진다. (4)K가 매우 증가하면 발진형태는 안정을 잃고 coherence collapse 상태에 도달한다.

  • PDF

무반사 코팅된 DFB 레이저 다이오드에서 발진 모드와 격자 위상 (Oscillation Mode and Grating Phase in DFB Laser Diode with an Anti-reflection Coated Mirror)

  • 권기영;기장근
    • 문화기술의 융합
    • /
    • 제8권5호
    • /
    • pp.483-488
    • /
    • 2022
  • 본 연구에서는 1.55um의 파장을 갖는 DFB 레이저 다이오드에서 이득 격자와 굴절률 격자가 동시에 존재할 때, 오른쪽 거울면에 무반사 코팅을 하여 ρr=0 이 되도록 하였다. δL<0인 경우일 때, 발진 모드에 대하여, 발진 주파수와 발진 이득의 특성을 해석했다. 좌측 거울면 상에서 격자의 위상이 π에서부터 π/2씩 연속적으로 감소할 때마다, 각 발진 모드의 (αL, δL) 그래프 선들이 좌측으로 δL 값이 약 0.6 정도씩 낮아지고 있음을 볼 수 있다. 문턱이득이 가장 낮은 발진 모드의 경우는 κL=10인 경우이고, 이때 모드 선별성은 다른 κL 값의 경우와 비교할 때 상대적으로 낮다. 모드 선별성이 우수한 경우는 κL=0.1 에서부터 κL=6 정도까지이고, 모드 선별성이 우수할수록 주파수 안정성이 우수하다. 두 개의 벽개면을 갖는 경우와 비교하면, 무반사 코팅을 한 DFB 레이저 다이오드는, 발진 모드의 문턱 이득은 약 2배 정도로 높아지지만 모드 선별성 측면은 2배 정도 더 우수해 진다.