• 한국세라믹학회지
• /
• 제31권3호
• /
• pp.312-320
• /
• 1994

Effect of the laser shot number on the particulates density of the pulsed laser deposited YBa2Cu3O7-x thin films and the laser irradiated surface morphology of the YBa2Cu3O7-x bulk target have been investigated. Until 100 laser shots of cumulative irradiation, the films has the particulates density of ~103 mm-2. However, after 100 laser shots, the density was increased more than 10 times. This results has been explained by the change of particulate ejection path with the development of conical structure at the target surface.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.496-496
• /
• 2007

Low level laser has various therapy effects. This paper performed the basic study for fabricating the low level laser therapy apparatus, and one of the goals of this paper was to make this apparatus used handily. The apparatus has been fabricated using the laser diode and microprocessor unit. The apparatus used a 660nm Laser diode for blood stream improvement and was designed for a pulse width modulation type to increase stimulation effects. In result, we could get the light power of 660nm wavelength and the 1~10Hz irradiation frequency could be controlled stably.

• 대한소아치과학회지
• /
• 제28권4호
• /
• pp.683-693
• /
• 2001

Er:YAG 레이저는 파장이 물의 주흡수 정점과 일치하는 $2.94{\mu}m$의 방출파장을 가지기 때문에, 물분사를 하면서 사용했을 때, 다른 레이저보다 열손상은 더 작으면서 치아경조직을 보다 효과적으로 삭제한다고 알려져 있다. Er:YAG 레이저의 상아질 삭제 효과를 평가하고자 발거된 소구치와 대구치를 대상으로 상아질 시편을 제작하고 $2.94{\mu}m$의 pulsed Er:YAG 레이저(SDL-300EN, 삼성전자, 한국)를 handpiece형의 전달계를 이용한 비접촉식 방법으로, 물에 담궈진 시간과 레이저 조사시간에 따른 삭제량과 형태를 조사, 분석하여 다음과 같은 결과를 얻었다. 1. 건전 상아질에 대한 조사 결과물에 담군 시간이 증가할수록 삭제율이 증가하였다. 2. 건전 상아질과 우식 상아질에 150mJ, 10Hz의 조건으로, 30초간 레이저를 조사했을 때, 우식상아질에 비해 건전 상아질에서 surface irregularity가 증가하고 상아세관이 열리는 경향이 있었으며 crack이 관찰되었다. 또한 우식 상아질에 비해 많은 탄조각(ash flecks), crack이 관찰되었고 상아세관의 불연속성 (inconsistency)이 관찰되었다. 3. 우식 상아질에서 30초로 조사한 경우에서는 dark zone이 와동에 국한되어 나타났으며 작은 fleck들이 관찰되었고, 1분간 조사한 경우에서는 30초의 경우보다도 와동이 더 넓었으며, crack이 상아세관 주행방향과 직각으로 형성된 것을 관찰 할 수 있었다. 2분간 조사한 경우는 와동이 가장 넓었으며 crack이 더 많이 형성된 것을 볼 수 있었다.

• Clinical and Experimental Reproductive Medicine
• /
• 제26권2호
• /
• pp.185-192
• /
• 1999

The present study was performed to investigate the efficacy and safety of laser assisted hatching (AH) on mouse embryos. Non-contact $1.48{\mu}m$ diode laser system used to create a precise hole on zona pellucida. 2-cell embryos were collected from the mice (ICR) that had the coitus vaginal plug confirmed at 48 hours after hCG injection. Collected 2-cell embryos were cultured in the HTF medium supplemented with 0.4% BSA. For experiments, embryos at 8-cell stage were used after 18-22 hours in culture. After assisted hatching, the embryos were further cultured in HTF medium containing 0.1% PVP (anti-hatching system) for 3 days. For evaluate efficiency of laser on mouse embryo hatching, the effect of AH methods (acidic tyrode, pronase and laser), the number of artificial holes (1, 2 and 3 hole) and the irradiation time of laser (2, 4, 6, 8 and 10 ms) were examined. Hatching rates of laser AH group (95.2%) was significantly higher than that of control group (50.8%), but there was no differences among the laser (95.2%), acidic tyrode (100%) and pronase (98.5%) groups. Hatching rates of the number of zona pellucida opening by laser, there were no differences among the 1 hole (87.5%),2 hole (92.1%) and 3 hole (85.9%) groups. Developmental and hatching rates of embryos according to laser irradiation time were similar in the treatment groups. Therefore, these results suggest that laser AH using non-contact $1.48{\mu}m$ diode laser is a simple and accurate and effective procedure for AH. Based on these results, laser AH could be use safely for human ART program.

• 대한소아치과학회지
• /
• 제23권3호
• /
• pp.640-658
• /
• 1996

The purpose of this study was to examine the mechanism of improving acid resistance of Nd-YAG laser irradiated tooth enamel and determine the most effective energy density for improving acid resistance. The bovine tooth enamel were lased with a pulsed Nd-YAG laser. The energy densities of exposed laser beam were varied from 10 to $70\;J/cm^2$. To investigate the degree of improving acid resistance by irradiation, all the samples were submerged to demineralize in 0.5 N $HClO_4$ solution for 1 minute. After 1 minute, 0.05 % $LaCl_3$ was added to the solution for interrupting the demineralization reaction. The amounts of dissolved calcium and phosphate in the solution were measured by using an atomic absorption spectrophotometer and the UV/VIS spectrophotometer, respectively. To examine the mechanism of improving acid resistance, X-ray diffraction analysis, infrared spectroscopy, and scanning electron microscopy were taken. The X-ray diffraction pattern of the samples were obtained in the $10^{\circ}{\sim}80^{\circ}2{\theta}$ range with $Cu-K{\alpha}$ radiation using M18HF(Mac Science Co.) with X-ray diffractometer operating at 40 KV and 300 mA. The infra-red spectra of the ground samples in 300 mg KBr pellets 10 mm diameter were obtained in the $4000cm^{-1}\;to\;400cm^{-1}$ range using JASCO 300E spectrophotometer. The scanning electron microscopy was carried out using JSM6400(JEOL Co.) with $500{\sim}2000$ times magnification. The results were as follow 1. The concentration of calcium dissolved from laser irradiated enamel with $50J/cm^2$ was significantly lesser than that of unlased control group (p<0.05) 2. From the result of the X-ray diffraction analysis, $\beta$-TCP, which increases acid solubility, was identified in lased enamel but the diffraction peaks of (002) and (004) became sharp with increasing energy density of laser irradiation. This means that the crystals in lased samples were grown through the c-axis and subsequently, the acid solubility of enamel decreased. 3. The a-axis parameter was slightly increased by laser irradiation, whereas the c-axis parameter was almost constant except for a little decrease at $50J/cm^2$. 4. In the infra-red spectra of lased enamels, phosphate bands ($600{\sim}500cm^{-1}$), B-carbonate bands (870, $1415{\sim}1455cm^{-1}$), and A-carbonate band ($1545cm^{-1}$) were observed. The amounts of phosphate bands and the B-carbonate bands were reduced, on the other hand, the amount of the A-carbonate band was increased by increase the energy density. 5. The SEM experiments reveal that the surface melting and recrystallization were appeared at $30J/cm^2$ and the cracks were observed at $70J/cm^2$. From above results, It may be suggested that the most effective energy density for improving acid resistance of tooth enamel with the irradiation of Nd-YAG laser was $50J/cm^2$. The mechanism of improving acid resistance were reduction of permeability due to surface melting and recrystallization of lased enamel and reduction of acid solubility of enamel due to decrease of carbonate content and growth of crystal.

• 대한의생명과학회지
• /
• 제15권1호
• /
• pp.87-91
• /
• 2009

In photodynamic therapy (PDT), oxygen plays important role. Because of singlet oxygen which is produced by activated photosensitizer after laser irradiation of specific wavelength. The aim of this study is to find how oxygen concentration affects anticancer effect in PDT. Groups were divided into PDT with oxygen applied group and only PDT applied group. PDT with oxygen applied group supplied oxygen for 15 minute before laser irradiation. In vitro, CT-26 cell was incubated with various concentration of photofrin $(50.0{\sim}0.05{\mu}g/ml)$ and was irradiated with 632nm diode laser 6hr after application of photofrin. The cell viability of two groups was assessed by MTT assay. In vivo, CT-26 cell line was transplanted into the subcutaneous tissue of BALB/c mouse. The anticancer effect of two groups was measured by tumor volume change. In vitro study, the cell viability was significantly decreased at $1.56{\sim}3.13{\mu}g/ml$ in PDT with oxygen applied group. In vivo study, the PDT with oxygen applied group significantly higher reduction rate of tumor volume 7 days after PDT compared to PDT only group. The high oxygen concentration might enhance the anticancer effect of the photodynamic therapy.

• 한국광학회지
• /
• 제1권2호
• /
• pp.210-216
• /
• 1990

본 연구에서는 레이저와 치아조직과의 상호작용에 대한 연구의 일환으로, $CO_2$ 레이저의 발진파장인 $10.6\mu\textrm{m}$의 레이저 빔 조사시에 일어나는 치아의 온도변화를 조사하기 위하여 $CO_2$ 레이저 발진장치를 제작하여 여러 가지 조사 에너지, 조사시간에 대하여 발거된 치아의 치수강의 온도변화를 측정 분석하였다. 측정한 data를 분석하여 최대 상승온도 $\DeltaT_m$를 추정할 수 있는 다음과 같은 실용적인 경험식을 얻었다. $\DeltaT_m=\alphaP\Delta\tauexp(-\betad)$$ 여기서 P는 레이저의 출력(W)이고 $\Delta\tau$는 조사시간(sec), d는 치아의 두께(mm)이다.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 The IMAPS-Korea Workshop 2001 Emerging Technology on packaging
• /
• pp.104-109
• /
• 2001

A 355 nm (3.5 eV) neodymium:yttrium aluminum gamet laser, produced by a harmonic generator, was used to create silver metallic particles as seeds for nucleation in photosensitive glass containing Ag+ and Ce3+ ions. The pulse width and frequency of the laser were 8 ns and 10 Hz, respectively. Heat treatment was conducted at 570 C for 1 h, following laser irradiation, to produce crystalline growth, after which a LiAlSi3O8 crystal phase appeared in the laser-irradiated Li2O A1203 SiO2 glass. For the Present study, we compared the effect of laser-induced crystallization on glass crystallization with that of spontaneous crystallization by heat treatment.

• 소성∙가공
• /
• 제13권3호
• /
• pp.268-272
• /
• 2004

Transparent materials such as fused silica are widely utilized in optical and optoelectronics field because of its outstanding properties, such as transparency in a wide wavelength range, strong damage resistance for laser irradiation, and high thermal and chemical stability. In this study, we made a few micro patterns on the surface of fused silica plate using laser induced wet etching. KrF excimer laser was used as a light source. There were no burrs and micro cracks on the etched surface of fused silica and the flatness of the etched surface was fairly good. We investigated the influence of etchant upon the etch rate and quality in laser induced wet etching. Pyrene-acetone solution and toluene were used as etchant. In the side of etch rate, toluene solution was better than pyrene-acetone solution. But we made in wider range of energy density using pyrene-acetone solution. But pyrene-acetone solution gave us wider window of energy density for successful micro patterning.

• International Journal of Contents
• /
• 제5권2호
• /
• pp.16-19
• /
• 2009

In this paper, we concern about the distribution characteristics of surface temperature by the increment of time, diffusivity and heat flux on irradiating of a laser. The penetration depth corresponding to the induced constant heat flux or irradiated laser, is simulated by a computer algorithm. The distribution of temperature versus penetration depth for the variation of time and diffusivity is characterized at the constant heat flux and on irradiating of a laser. The temperature of constant heat flux at the fixed diffusivity or time, is decreased by the pattern of exponential function as the time t or diffusivity a is increased (a=10, 100, 1000). The temperature of constant heat flux is not changed but exponentially fixed with the increasing diffusivity and the fixed time. On the other hand, the temperature of laser at the fixed diffusivity or time is decreased linearly. Our results show that the characteristics of the simulated surface temperature in a semi-infinite solid are similar to the graphs on theoretical consideration.