• 제목/요약/키워드: Laser irradiation

검색결과 623건 처리시간 0.026초

904nm의 펄스형 다이오드 저수준레이저광조사가 발치창에 미치는 효과 (Effeects of Low Level Laser Irradiation with 904nm Pulsed Diode Laser on the Extraction Wound)

  • 김기석
    • Journal of Oral Medicine and Pain
    • /
    • 제23권4호
    • /
    • pp.301-307
    • /
    • 1998
  • 본 연구에서는 904nm의 다이오드 레이저를 발치창에 조사하여 효과를 분석하교, 동물실험에서 제시된 가설 즉 레이저 광조사가 주위정상조직을 자극하여 창상치유를 촉진하고 진통, 항염증효과가 있는지를 확인하고저 하였다. 먼저 19명의 발치환자에게 발치후 즉시 1분간 평균 14mW의 저수준레이저를 조사하였다. 이들중 8명은 대조군으로서 위조사(sham-irradiation)하였다. 일주일동안 시간경과에 따른 동통의 정도, 진통제의 사용횟수, 진통제 사용기간등을 각각조사하였다. Visual analogue scale로 두근에서 동통의 정도를 비교한 결과 대조군 보다 레이저 조사군에서 동통이 유의하게 감소하였으며, 진통제의 사용횟수가 기간도 레이저조사군에서 유의하게 감소하였다. 이러한 결과로 보아 비록 1분간의 적은 량의 레이저 조사라도 발치후 합병증을 억제하여 동통을 억제하고 치유를 촉진한다고 사료된다.

  • PDF

YAG LASER에 의한공구강의 표면개질에 관한 연구 (A Study on the Surfaces Modification of Tool Steel by YAG LASER)

  • 강형식
    • 한국생산제조학회지
    • /
    • 제9권2호
    • /
    • pp.66-71
    • /
    • 2000
  • Laser induced surface hardening of Tool steel(STC5) can be achieved either with or without surface melting. In trans-formation hardening as the surface is heated to a temperature below its melting point and is rapidly cooled solidified microstructures are usually much finer and stronger than those of the base matals. For this reason surface modification of tool steel by YAG laser irradiation has been studied as a function of processing parameters such as power density pulse width defocusing distance and molten depth. The high energy density changes and refines the microstructure of the near surface layer. In the case of beam passes martensite formed in the melt zone exhibited very high vickers hardness values. Molten depth and width depend on defocusing distance and energy of black color painting is more absorptive than other color painting.

  • PDF

Improved Adhesive Strength of Vulcanized Rubber upon Laser Treatments

  • Sohn, Hong-lae;Lee, Bong-Ju
    • Macromolecular Research
    • /
    • 제12권5호
    • /
    • pp.540-543
    • /
    • 2004
  • Surface treatment using an excimer pulse laser beam has been conducted in order to increase the adhesive strength of vulcanized rubber. The adhesive strength increased with increasing the number of irradiation time with laser pulses and reached to 1,500 N/m after 100 cycles of irradiation. Increased in energy density was directly proportional to the improvement of the adhesive strength. Maximum value of the adhesive strength of 1,500 N/m obtained at the energy density of 176 mJ/$\textrm{cm}^2$. We conclude that an increased energy density improves in both the surface area and adhesive strength.

레이저를 이용한 임프란트 이차수술시 온도변화에 관한 실험적 연구 (TEMPERATURE CHANGES OF IMPLANT SURFACE IN SECOND STAGE SURGERY WITH DETAL LASER : IN VITRO STUDY)

  • 안현정;김현철;최병갑;송언희;김래경
    • 대한치과보철학회지
    • /
    • 제37권2호
    • /
    • pp.256-268
    • /
    • 1999
  • Submerged implants require secondary surgical uncovering of implants after healing period of 3-6 months. In surgical methods, there are surgical scalpel, tissue punch, electro-surgical, and laser-used uncovering, and so forth The objectives of this study are investigation and assessment of 1) thermal change in clinical application for uncovering of HA-coated implant and pure titanium implant irradiated by pulsed Nd-YAG, $CO_2$, and Er-YAG laser. 2) surface change of cover screws aaer irradiation using laser energy. The temperature of apex & side wall of implants were recorded at 10sec, 20sec, 30sec after 30sec irradiation to implant healing screw; 1) pulsed Nd-YAG laser; 2W, 20pps, contact mode 2) $CO_2$ laser; water-infused & non-water infused state, 2.5-3.5W, contibuous mode, noncontact mode 3) $CO_2$ laser ; non-water infused state, 3W, superpulse, noncontact. mode 4) Er-YAG laser; (1) non-water infused state, 10pps, 60mj, contact mode (2) water-infused state, 10pps, 60mj, 80mj, 101mj, contact mode. According to the results of this study, pulsed Nd-YAG laser is not indicated because of increased thermal change and pitting of metal surface of implant cover screw. By contrast, $CO_2$ laser & Er-YAG laser are presumed to indicate because of narrow range of thermal change & near abscence of thermal damage of metal surface. Dental laser is thought to be much helpful to surgical procedure when it is used as optimal power and time condition considering characteristics and indications of each laser. Further research is needed to verify that these techniques are safe and beneficial to implant success.

  • PDF

Laser Treatment in Restorative Dentistry

  • Shintani, Hideaki
    • 대한치과보존학회:학술대회논문집
    • /
    • 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
    • /
    • pp.556-556
    • /
    • 2001
  • The application of the laser to the tooth hard tissue started from the removal of carious dentin with the laser performed by Goldman in 1964. With the development of the laser technology, the laser treatment with less descomfort such as pain, vibration, and noise, etc. has been attempted. Since it is difficult to give a suitable form for inlay restoration to a cavity prepared with laser, it has to be restored with adhesive resinous materials. However, various evaluation of adhesive properties of the resinous materials to lased tooth surface on the various conditions such as adgerent, irradiation condition, procedure of bond test, and adhesive materials used, etc. have been reported.(omitted)

  • PDF

저출력 레이저 조사가 성견의 실험적 치주질환 치유에 미치는 영향에 관한 조직병리학적 연구 (THE HEALING EFFECTS OF LOW POWER DENSITY LASER TO THE EXPERIMENTAL PERIODONTITIS;HISTOPATHOLOGIC STUDY)

  • 김동운;이재현;정진형
    • Journal of Periodontal and Implant Science
    • /
    • 제23권1호
    • /
    • pp.16-26
    • /
    • 1993
  • In order to investigate the healing effect on inflammation and bone regeneration of low power density laser radiation in dogs, experimental periodontitis was made in dog mandibular 3rd, 4th premolars. All teeth were classified with four groups of two experimental group and control groups. The second group were irradiated on periodontitis site and the first group were control. The fourth group were irradiated on periodontitis site flap operation and the third group were flap control. Experimental groups were irradiated with GaAs low power density laser of pulse wave and continuous wave of 904nm every day by five days respectively and then control group and experimental groups were evaluated by histo-pathological study. The results were as follows : 1. Experimental periodontits site of dog were irradiated with GaAs low power laser results in reducing of pseudoepitheliomatous proliferation and inflammation at light microscope. 2. After irradiation with low power density laser, experimental groups were revealed that PDL forming activity were increased and newly formed collagen deposition were observed. 3. Low power density lsaer irradiation on experimental periodontits site after flap operation showed that decreasing of inflammation, reducing of osteoclast activity. Capillary proliferation, reduction of pseudoepitheliomatous proliferation. 4. After irradiation with low power density laser on flap experimental site, experimental groups were revealed that newly formed collagen in periodontal ligament and alveolar bone were detected on MT staining.

  • PDF

흰쥐의 피부화상 후 저강도 레이저 조사가 Substance P의 발현에 미치는 영향 (Effects of Low Power Laser for the Expression of Substance P in the Burned Skin of the Rats)

  • 구현모;이선민;남기원;김석범;천송희;강종호;김진상
    • The Journal of Korean Physical Therapy
    • /
    • 제15권3호
    • /
    • pp.239-250
    • /
    • 2003
  • This study was performed to investigate the effect of low power laser irradiation on Substance P(SP) expression in the burned skin of the rats. Burns of about 3cm in diameter were created with $75^{\cric}C$ water on the back of the rats, and the lesion of experimental group were irradiated on days 1, 2, 3 and 4 postwounding. Control leasions were not irradiated. After burns, low power laser irradiation was applied by using 1000Hz, 830nm GaAlAs(Gallium-aluminum-arsenide) semiconductor diode laser. The expression of evaluated Substance P(SP) immunohistochemistry on rabbit anti-SP The results of this study wereas follows 1. The Substance P was expressed in the lamina I and II of dorsal horn of spinal cord. In expression of SP, the lesion of control group made SP to more induce significantly than experimental leasions. 2. SP immunoreactivity in burned leasion of spinal cord were decreased markedly 4 days after burns, and decreased gradually from 1 day to 2 days in burns which is laser irradiation These data suggest that low power laser have a pain release effect in the burned skin of the rats.

  • PDF